RE: [PATCH 1/3] drm/layerscape: Add fsl dcu DRM driver
From: Jianwei.Wang@xxxxxxxxxxxxx
Date: Wed Mar 18 2015 - 21:41:30 EST
Hi Stefan,
Thank you for your comment. I'll correct this next time.
> -----Original Message-----
> From: Stefan Agner [mailto:stefan@xxxxxxxx]
> Sent: Thursday, March 19, 2015 6:58 AM
> To: Wang Jianwei-B52261
> Cc: Wood Scott-B07421; airlied@xxxxxxxx; jbarnes@xxxxxxxxxxxxxxxx; dri-
> devel@xxxxxxxxxxxxxxxxxxxxx; Xiubo Li; Wang Huan-B18965; linux-
> kernel@xxxxxxxxxxxxxxx; Jin Zhengxiong-R64188; linux-arm-
> kernel@xxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH 1/3] drm/layerscape: Add fsl dcu DRM driver
>
> Hi Jianwei,
>
> Normally, for the second and higher iteration of a patchset, developers
> add the version to the subject (e.g. PATCH v2). You can use the --reroll-
> count option when creating the patches with git format-patch.
>
> On 2015-03-13 10:44, Jianwei Wang wrote:
> > This patch add support for Two Dimensional Animation and Compositing
> > Engine (2D-ACE) on Freescale SoCs.
> >
> > 2D-ACE is a Freescale display controller. It provide an hardware
> > cursor.
> >
> > This is a simplified version, only a primary plane, a fb created for
> > fbdev, a crtc, a connector for TFT LCD panel, an encoder, and the
> > encoder is not in use.
> >
> > Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx>
> > Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
> > Signed-off-by: Jianwei Wang <b52261@xxxxxxxxxxxxx>
> > ---
> >
> > Changed in v2:
> > - Add atomic support
> > - Modify bindings file
> > - Rename node for compatibility
> > - Move platform related code out for compatibility
> >
> > Added in v1:
> > -ÂAdd support for DCU display controller on the Freescale LS102x SoCs.
> > - Create a primary plane, a fb created for fbdev, a crtc, a connector
> > for TFT LCD panel, an encoder.
> >
> > arch/arm/mach-imx/mach-ls1021a.c | 36 ++++
> > drivers/gpu/drm/Kconfig | 2 +
> > drivers/gpu/drm/Makefile | 1 +
> > drivers/gpu/drm/fsl/Kconfig | 17 ++
> > drivers/gpu/drm/fsl/Makefile | 8 +
> > drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c | 203
> > ++++++++++++++++++++ drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h | 28
> +++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c | 164 ++++++++++++++++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h | 26 +++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c | 288
> ++++++++++++++++++++++++++++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h | 168 ++++++++++++++++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c | 26 +++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c | 42 ++++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h | 17 ++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c | 187 ++++++++++++++++++
> > drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h | 23 +++
> > include/linux/fsl/dcu.h | 22 +++
> > 17 files changed, 1258 insertions(+)
> > create mode 100644 drivers/gpu/drm/fsl/Kconfig create mode 100644
> > drivers/gpu/drm/fsl/Makefile create mode 100644
> > drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> > create mode 100644 drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> > create mode 100644 include/linux/fsl/dcu.h
> >
> > diff --git a/arch/arm/mach-imx/mach-ls1021a.c
> > b/arch/arm/mach-imx/mach-ls1021a.c
> > index b89c858..4fb346d 100644
> > --- a/arch/arm/mach-imx/mach-ls1021a.c
> > +++ b/arch/arm/mach-imx/mach-ls1021a.c
> > @@ -8,9 +8,44 @@
> > */
> >
> > #include <asm/mach/arch.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> > +#include <linux/fsl/dcu.h>
> >
> > #include "common.h"
> >
> > +void dcu_pixclk_disable(void)
> > +{
> > + struct regmap *scfg_regmap;
> > +
> > + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> > + if (IS_ERR(scfg_regmap)) {
> > + pr_err("No syscfg phandle specified\n");
> > + return;
> > + }
> > +
> > + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_DISABLE); }
> > +
> > +void dcu_pixclk_enable(void)
> > +{
> > + struct regmap *scfg_regmap;
> > +
> > + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg");
> > + if (IS_ERR(scfg_regmap)) {
> > + pr_err("No syscfg phandle specified\n");
> > + return;
> > + }
> > +
> > + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_ENABLE); }
> > +
> > +static void __init ls1021a_init_machine(void) {
> > + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> > + dcu_pixclk_enable();
> > +}
>
> This change should be in a separate patch. However, I'm not convinced that
> the current code is the right solution. You should try to avoid calling
> from the driver directly into arch code.
>
> I don't have access to the reference manual, hence I can't lookup that
> module. But this register looks just like a clock gate...
>
> On Vybrid, the Pixelclock is enabled through CCM_CSCDR3 and friends, and
> the CCM module makes use of the common clock framework. In the end, the
> clock is assigned to the nodes (e.g. DCU node in this case) and requested
> during runtime. The framework makes sure the clock and the relevant gates
> get enabled. See:
> http://lxr.free-electrons.com/source/arch/arm/mach-imx/clk-
> vf610.c?v=3.12#L241
>
> --
> Stefan
>
> > static const char * const ls1021a_dt_compat[] __initconst = {
> > "fsl,ls1021a",
> > NULL,
> > @@ -18,5 +53,6 @@ static const char * const ls1021a_dt_compat[]
> > __initconst = {
> >
> > DT_MACHINE_START(LS1021A, "Freescale LS1021A")
> > .smp = smp_ops(ls1021a_smp_ops),
> > + .init_machine = ls1021a_init_machine,
> > .dt_compat = ls1021a_dt_compat,
> > MACHINE_END
> > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index
> > 151a050..a6957aa 100644
> > --- a/drivers/gpu/drm/Kconfig
> > +++ b/drivers/gpu/drm/Kconfig
> > @@ -199,6 +199,8 @@ source "drivers/gpu/drm/bochs/Kconfig"
> >
> > source "drivers/gpu/drm/msm/Kconfig"
> >
> > +source "drivers/gpu/drm/fsl/Kconfig"
> > +
> > source "drivers/gpu/drm/tegra/Kconfig"
> >
> > source "drivers/gpu/drm/panel/Kconfig"
> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index
> > 2c239b9..ab5b9ef 100644
> > --- a/drivers/gpu/drm/Makefile
> > +++ b/drivers/gpu/drm/Makefile
> > @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_UDL) += udl/
> > obj-$(CONFIG_DRM_AST) += ast/
> > obj-$(CONFIG_DRM_ARMADA) += armada/
> > obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/
> > +obj-$(CONFIG_DRM_FSL_DCU) += fsl/
> > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/
> > obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/
> > obj-$(CONFIG_DRM_OMAP) += omapdrm/
> > diff --git a/drivers/gpu/drm/fsl/Kconfig b/drivers/gpu/drm/fsl/Kconfig
> > new file mode 100644 index 0000000..e4f8df0
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/Kconfig
> > @@ -0,0 +1,17 @@
> > +config DRM_FSL_DCU
> > + tristate "DRM Support for Freescale DCU"
> > + depends on DRM && OF && ARM
> > + select DRM_KMS_HELPER
> > + select DRM_KMS_CMA_HELPER
> > + select VIDEOMODE_HELPERS
> > + select BACKLIGHT_CLASS_DEVICE
> > + select BACKLIGHT_LCD_SUPPORT
> > + select REGMAP_MMIO
> > + select DRM_KMS_FB_HELPER
> > + select FB_SYS_FILLRECT
> > + select FB_SYS_COPYAREA
> > + select FB_SYS_IMAGEBLIT
> > + select FB_SYS_FOPS
> > + help
> > + Choose this option if you have an Freescale DCU chipset.
> > + If M is selected the module will be called fsl-dcu-drm.
> > diff --git a/drivers/gpu/drm/fsl/Makefile
> > b/drivers/gpu/drm/fsl/Makefile new file mode 100644 index
> > 0000000..5f74aee
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/Makefile
> > @@ -0,0 +1,8 @@
> > +fsl-dcu-drm-y := fsl_dcu_drm_drv.o \
> > + fsl_dcu_drm_kms.o \
> > + fsl_dcu_drm_connector.o \
> > + fsl_dcu_drm_plane.o \
> > + fsl_dcu_drm_crtc.o \
> > + fsl_dcu_drm_fbdev.o \
> > +
> > +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> > new file mode 100644
> > index 0000000..178d647
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.c
> > @@ -0,0 +1,203 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <linux/backlight.h>
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_atomic_helper.h>
> > +#include <video/of_display_timing.h>
> > +
> > +#include "fsl_dcu_drm_drv.h"
> > +#include "fsl_dcu_drm_connector.h"
> > +
> > +static void fsl_dcu_drm_encoder_dpms(struct drm_encoder *encoder, int
> > +mode) { }
> > +
> > +/* Disable the encoders as the first thing we do. */ static void
> > +fsl_dcu_drm_encoder_mode_prepare(struct drm_encoder *encoder) { }
> > +
> > +static void fsl_dcu_drm_encoder_mode_set(struct drm_encoder *encoder,
> > + struct drm_display_mode *mode,
> > + struct drm_display_mode *adjusted_mode) { }
> > +
> > +static void fsl_dcu_drm_encoder_mode_commit(struct drm_encoder
> > +*encoder) { }
> > +
> > +static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder)
> > +{ }
> > +
> > +static int
> > +fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder,
> > + struct drm_crtc_state *crtc_state,
> > + struct drm_connector_state *conn_state) {
> > + return 0;
> > +}
> > +
> > +static bool
> > +fsl_dcu_drm_encoder_mode_fixup(struct drm_encoder *encoder,
> > + const struct drm_display_mode *mode,
> > + struct drm_display_mode *adjusted_mode) {
> > + return true;
> > +}
> > +
> > +static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder)
> > +{
> > + drm_encoder_cleanup(encoder);
> > +}
> > +
> > +static const struct drm_encoder_helper_funcs encoder_helper_funcs = {
> > + .dpms = fsl_dcu_drm_encoder_dpms,
> > + .prepare = fsl_dcu_drm_encoder_mode_prepare,
> > + .commit = fsl_dcu_drm_encoder_mode_commit,
> > + .mode_set = fsl_dcu_drm_encoder_mode_set,
> > + .disable = fsl_dcu_drm_encoder_disable,
> > + .atomic_check = fsl_dcu_drm_encoder_atomic_check,
> > + .mode_fixup = fsl_dcu_drm_encoder_mode_fixup, };
> > +
> > +static const struct drm_encoder_funcs encoder_funcs = {
> > + .destroy = fsl_dcu_drm_encoder_destroy, };
> > +
> > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev) {
> > + struct drm_encoder *encoder = &fsl_dev->encoder;
> > + int ret;
> > +
> > + encoder->possible_crtcs = 1;
> > +
> > + ret = drm_encoder_init(fsl_dev->ddev, encoder, &encoder_funcs,
> > + DRM_MODE_ENCODER_LVDS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + drm_encoder_helper_add(encoder, &encoder_helper_funcs);
> > +
> > + return 0;
> > +}
> > +
> > +#define to_fsl_dcu_connector(connector) \
> > + container_of(connector, struct fsl_dcu_drm_connector, connector)
> > +
> > +static int fsl_dcu_drm_connector_get_modes(struct drm_connector
> > +*connector) {
> > + struct drm_device *dev = connector->dev;
> > + struct device_node *display_np, *np = dev->dev->of_node;
> > + struct drm_display_mode *mode = drm_mode_create(connector->dev);
> > + int num_modes = 0;
> > +
> > + if (np) {
> > + display_np = of_parse_phandle(np, "display", 0);
> > + if (!display_np) {
> > + dev_err(dev->dev, "failed to find display phandle\n");
> > + return num_modes;
> > + }
> > + of_get_drm_display_mode(display_np, mode, OF_USE_NATIVE_MODE);
> > + mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
> > + drm_mode_probed_add(connector, mode);
> > + num_modes++;
> > + }
> > +
> > + return num_modes;
> > +}
> > +
> > +static int fsl_dcu_drm_connector_mode_valid(struct drm_connector
> *connector,
> > + struct drm_display_mode *mode) {
> > + return MODE_OK;
> > +}
> > +
> > +static struct drm_encoder *
> > +fsl_dcu_drm_connector_best_encoder(struct drm_connector *connector) {
> > + struct fsl_dcu_drm_connector *fsl_con =
> > +to_fsl_dcu_connector(connector);
> > +
> > + return fsl_con->encoder;
> > +}
> > +
> > +static void fsl_dcu_drm_connector_destroy(struct drm_connector
> > +*connector) {
> > + drm_connector_unregister(connector);
> > + drm_connector_cleanup(connector);
> > +}
> > +
> > +static enum drm_connector_status
> > +fsl_dcu_drm_connector_detect(struct drm_connector *connector, bool
> > +force) {
> > + return connector_status_connected;
> > +}
> > +
> > +static const struct drm_connector_funcs fsl_dcu_drm_connector_funcs = {
> > + .dpms = drm_atomic_helper_connector_dpms,
> > + .reset = drm_atomic_helper_connector_reset,
> > + .detect = fsl_dcu_drm_connector_detect,
> > + .fill_modes = drm_helper_probe_single_connector_modes,
> > + .destroy = fsl_dcu_drm_connector_destroy,
> > + .atomic_duplicate_state =
> drm_atomic_helper_connector_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> > +};
> > +
> > +static const struct drm_connector_helper_funcs connector_helper_funcs =
> {
> > + .get_modes = fsl_dcu_drm_connector_get_modes,
> > + .mode_valid = fsl_dcu_drm_connector_mode_valid,
> > + .best_encoder = fsl_dcu_drm_connector_best_encoder,
> > +};
> > +
> > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,
> > + struct drm_encoder *encoder)
> > +{
> > + struct drm_connector *connector = &fsl_dev->connector.connector;
> > + int ret;
> > +
> > + fsl_dev->connector.encoder = encoder;
> > +
> > + connector->display_info.width_mm = 0;
> > + connector->display_info.height_mm = 0;
> > +
> > + ret = drm_connector_init(fsl_dev->ddev, connector,
> > + &fsl_dcu_drm_connector_funcs,
> > + DRM_MODE_CONNECTOR_LVDS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + connector->dpms = DRM_MODE_DPMS_OFF;
> > + drm_connector_helper_add(connector, &connector_helper_funcs);
> > + ret = drm_connector_register(connector);
> > + if (ret < 0)
> > + goto err_cleanup;
> > +
> > + ret = drm_mode_connector_attach_encoder(connector, encoder);
> > + if (ret < 0)
> > + goto err_sysfs;
> > +
> > + connector->encoder = encoder;
> > +
> > + drm_object_property_set_value
> > + (&connector->base, fsl_dev->ddev->mode_config.dpms_property,
> > + DRM_MODE_DPMS_OFF);
> > +
> > + return 0;
> > +
> > +err_sysfs:
> > + drm_connector_unregister(connector);
> > +err_cleanup:
> > + drm_connector_cleanup(connector);
> > + return ret;
> > +}
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> > new file mode 100644
> > index 0000000..afe44ab
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_connector.h
> > @@ -0,0 +1,28 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_DRM_CONNECTOR_H__
> > +#define __FSL_DCU_DRM_CONNECTOR_H__
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_crtc.h>
> > +
> > +struct fsl_dcu_drm_device;
> > +struct fsl_dcu_drm_connector {
> > + struct drm_connector connector;
> > + struct drm_encoder *encoder;
> > +};
> > +
> > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev);
> > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev,
> > + struct drm_encoder *encoder);
> > +
> > +#endif /* __FSL_DCU_DRM_CONNECTOR_H__ */
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> > new file mode 100644
> > index 0000000..a43e7ce
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.c
> > @@ -0,0 +1,164 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <linux/regmap.h>
> > +#include <linux/clk.h>
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_atomic.h>
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_crtc.h>
> > +
> > +#include "fsl_dcu_drm_crtc.h"
> > +#include "fsl_dcu_drm_drv.h"
> > +#include "fsl_dcu_drm_plane.h"
> > +
> > +#define to_fsl_dcu_crtc(c) container_of(c, struct fsl_dcu_drm_crtc,
> crtc)
> > +
> > +void fsl_dcu_drm_crtc_suspend(struct drm_crtc *crtc) { }
> > +
> > +static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) {
> > + struct drm_device *dev = crtc->dev;
> > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private;
> > + struct drm_display_mode *mode = &crtc->state->mode;
> > + uint32_t hbp, hfp, hsw, vbp, vfp, vsw, div, index;
> > +
> > + DBG(": set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x",
> > + mode->base.id, mode->name,
> > + mode->vrefresh, mode->clock,
> > + mode->hdisplay, mode->hsync_start,
> > + mode->hsync_end, mode->htotal,
> > + mode->vdisplay, mode->vsync_start,
> > + mode->vsync_end, mode->vtotal,
> > + mode->type, mode->flags);
> > +
> > + index = drm_crtc_index(crtc);
> > + div = (uint32_t)clk_get_rate(fsl_dev->clk) / mode->clock / 1000;
> > +
> > + /* Configure timings: */
> > + hbp = mode->htotal - mode->hsync_end;
> > + hfp = mode->hsync_start - mode->hdisplay;
> > + hsw = mode->hsync_end - mode->hsync_start;
> > + vbp = mode->vtotal - mode->vsync_end;
> > + vfp = mode->vsync_start - mode->vdisplay;
> > + vsw = mode->vsync_end - mode->vsync_start;
> > +
> > + regmap_write(fsl_dev->regmap, DCU_HSYN_PARA,
> > + DCU_HSYN_PARA_BP(hbp) |
> > + DCU_HSYN_PARA_PW(hsw) |
> > + DCU_HSYN_PARA_FP(hfp));
> > + regmap_write(fsl_dev->regmap, DCU_VSYN_PARA,
> > + DCU_VSYN_PARA_BP(vbp) |
> > + DCU_VSYN_PARA_PW(vsw) |
> > + DCU_VSYN_PARA_FP(vfp));
> > + regmap_write(fsl_dev->regmap, DCU_DISP_SIZE,
> > + DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) |
> > + DCU_DISP_SIZE_DELTA_X(mode->hdisplay));
> > + regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div);
> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> > +DCU_UPDATE_MODE_READREG); }
> > +
> > +static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc,
> > + const struct drm_display_mode *mode,
> > + struct drm_display_mode *adjusted_mode) {
> > + return true;
> > +}
> > +
> > +static void fsl_dcu_drm_crtc_prepare(struct drm_crtc *crtc) { }
> > +
> > +/* Now enable the clocks, plane, pipe, and connectors that we set up.
> > +*/ static void fsl_dcu_drm_crtc_mode_commit(struct drm_crtc *crtc) {
> > +}
> > +
> > +static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc,
> > + struct drm_crtc_state *state)
> > +{
> > + return 0;
> > +}
> > +
> > +static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc) { }
> > +
> > +static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc) { }
> > +
> > +static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc) { }
> > +
> > +static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = {
> > + .page_flip = drm_atomic_helper_page_flip,
> > + .set_config = drm_crtc_helper_set_config,
> > + .destroy = drm_crtc_cleanup,
> > + .reset = drm_atomic_helper_crtc_reset,
> > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> > +};
> > +
> > +static void fsl_dcu_drm_crtc_dpms(struct drm_crtc *crtc, int mode) {
> > +}
> > +
> > +static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs
> = {
> > + .disable = fsl_dcu_drm_disable_crtc,
> > + .mode_fixup = fsl_dcu_drm_crtc_mode_fixup,
> > + .mode_set = drm_helper_crtc_mode_set,
> > + .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb,
> > + .mode_set_base = drm_helper_crtc_mode_set_base,
> > + .prepare = fsl_dcu_drm_crtc_prepare,
> > + .commit = fsl_dcu_drm_crtc_mode_commit,
> > + .atomic_check = fsl_dcu_drm_crtc_atomic_check,
> > + .atomic_begin = fsl_dcu_drm_crtc_atomic_begin,
> > + .atomic_flush = fsl_dcu_drm_crtc_atomic_flush,
> > + .dpms = fsl_dcu_drm_crtc_dpms,
> > +};
> > +
> > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev) {
> > + struct drm_plane *primary;
> > + struct drm_crtc *crtc = &fsl_dev->crtc.crtc;
> > + int ret;
> > +
> > + fsl_dev->crtc.dpms = DRM_MODE_DPMS_OFF;
> > +
> > + primary = fsl_dcu_drm_primary_create_plane(fsl_dev->ddev);
> > + ret = drm_crtc_init_with_planes(fsl_dev->ddev, crtc, primary, NULL,
> > + &fsl_dcu_drm_crtc_funcs);
> > + if (ret < 0)
> > + return ret;
> > +
> > + drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs);
> > +
> > + regmap_write(fsl_dev->regmap, DCU_SYN_POL,
> > + DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW);
> > + regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) |
> > + DCU_BGND_G(0) | DCU_BGND_B(0));
> > + regmap_write(fsl_dev->regmap, DCU_DCU_MODE,
> > + DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN);
> > + regmap_write(fsl_dev->regmap, DCU_THRESHOLD,
> > + DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) |
> > + DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) |
> > + DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL));
> > + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE,
> > + DCU_MODE_DCU_MODE_MASK,
> > + DCU_MODE_DCU_MODE(DCU_MODE_NORMAL));
> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> DCU_UPDATE_MODE_READREG);
> > + return 0;
> > +}
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> > new file mode 100644
> > index 0000000..d44b564
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_crtc.h
> > @@ -0,0 +1,26 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_DRM_CRTC_H__
> > +#define __FSL_DCU_DRM_CRTC_H__
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_crtc.h>
> > +
> > +struct fsl_dcu_drm_device;
> > +struct fsl_dcu_drm_crtc {
> > + struct drm_crtc crtc;
> > + int dpms;
> > +};
> > +
> > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev);
> > +
> > +#endif /* __FSL_DCU_DRM_CRTC_H__ */
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> > new file mode 100644
> > index 0000000..10975ee
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.c
> > @@ -0,0 +1,288 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <linux/clk.h>
> > +#include <linux/io.h>
> > +#include <linux/mm.h>
> > +#include <linux/module.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +
> > +#include <drm/drmP.h>
> > +#include <linux/fsl/dcu.h>
> > +
> > +#include "fsl_dcu_drm_drv.h"
> > +#include "fsl_dcu_drm_kms.h"
> > +
> > +static int fsl_dcu_unload(struct drm_device *dev) {
> > + drm_mode_config_cleanup(dev);
> > + drm_vblank_cleanup(dev);
> > + drm_irq_uninstall(dev);
> > +
> > + dev->dev_private = NULL;
> > +
> > + return 0;
> > +}
> > +
> > +static struct regmap_config fsl_dcu_regmap_config = {
> > + .reg_bits = 32,
> > + .reg_stride = 4,
> > + .val_bits = 32,
> > +};
> > +
> > +static int fsl_dcu_bypass_tcon(struct fsl_dcu_drm_device *fsl_dev,
> > + struct device_node *np)
> > +{
> > + struct device_node *tcon_np;
> > + struct platform_device *pdev;
> > + struct clk *tcon_clk;
> > + struct resource *res;
> > + void __iomem *base;
> > +
> > + tcon_np = of_parse_phandle(np, "tcon-controller", 0);
> > + if (!tcon_np)
> > + return -EINVAL;
> > +
> > + pdev = of_find_device_by_node(tcon_np);
> > + if (!pdev)
> > + return -EINVAL;
> > +
> > + tcon_clk = devm_clk_get(&pdev->dev, "tcon");
> > + if (IS_ERR(tcon_clk))
> > + return PTR_ERR(tcon_clk);
> > + clk_prepare_enable(tcon_clk);
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + if (!res)
> > + return -ENODEV;
> > +
> > + base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(base))
> > + return PTR_ERR(base);
> > +
> > + fsl_dev->tcon_regmap = devm_regmap_init_mmio_clk(&pdev->dev,
> > + "tcon", base, &fsl_dcu_regmap_config);
> > + if (IS_ERR(fsl_dev->tcon_regmap)) {
> > + dev_err(&pdev->dev, "regmap init failed\n");
> > + return PTR_ERR(fsl_dev->tcon_regmap);
> > + }
> > +
> > + regmap_write(fsl_dev->tcon_regmap, TCON_CTRL1, TCON_BYPASS_ENABLE);
> > + return 0;
> > +}
> > +
> > +static int fsl_dcu_load(struct drm_device *dev, unsigned long flags)
> > +{
> > + struct platform_device *pdev = dev->platformdev;
> > + struct fsl_dcu_drm_device *fsl_dev;
> > + struct resource *res;
> > + void __iomem *base;
> > + int ret;
> > +
> > + fsl_dev = devm_kzalloc(&pdev->dev, sizeof(*fsl_dev), GFP_KERNEL);
> > + if (!fsl_dev)
> > + return -ENOMEM;
> > +
> > + fsl_dev->dev = &pdev->dev;
> > + fsl_dev->ddev = dev;
> > + dev->dev_private = fsl_dev;
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(base)) {
> > + ret = PTR_ERR(base);
> > + return ret;
> > + }
> > +
> > + fsl_dev->regmap = devm_regmap_init_mmio(&pdev->dev,
> > + base, &fsl_dcu_regmap_config);
> > + if (IS_ERR(fsl_dev->regmap)) {
> > + dev_err(&pdev->dev, "regmap init failed\n");
> > + return PTR_ERR(fsl_dev->regmap);
> > + }
> > +
> > + ret = fsl_dcu_drm_modeset_init(fsl_dev);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to initialize mode setting\n");
> > + return ret;
> > + }
> > +
> > + ret = drm_vblank_init(dev, 1);
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to initialize vblank\n");
> > + goto done;
> > + }
> > +
> > + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0));
> > + if (ret < 0) {
> > + dev_err(&pdev->dev, "failed to install IRQ handler\n");
> > + goto done;
> > + }
> > +
> > + /* Put TCON in bypass mode, so the input signals from DCU are passed
> > + * through TCON unchanged */
> > + fsl_dcu_bypass_tcon(fsl_dev, pdev->dev.of_node);
> > +
> > + fsl_dev->clk = devm_clk_get(&pdev->dev, "dcu");
> > + if (IS_ERR(fsl_dev->clk)) {
> > + ret = PTR_ERR(fsl_dev->clk);
> > + dev_err(&pdev->dev, "could not get clock\n");
> > + return ret;
> > + }
> > + clk_prepare_enable(fsl_dev->clk);
> > +
> > + dev_set_drvdata(dev->dev, fsl_dev);
> > +
> > + fsl_dcu_fbdev_init(dev);
> > +
> > + return 0;
> > +done:
> > + if (ret)
> > + fsl_dcu_unload(dev);
> > +
> > + return ret;
> > +}
> > +
> > +static void fsl_dcu_drm_preclose(struct drm_device *dev, struct
> > +drm_file *file) {
> > + ;
> > +}
> > +
> > +static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg) {
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int fsl_dcu_drm_enable_vblank(struct drm_device *dev, int
> > +crtc) {
> > + return 0;
> > +}
> > +
> > +static void fsl_dcu_drm_disable_vblank(struct drm_device *dev, int
> > +crtc) {
> > + ;
> > +}
> > +
> > +static const struct file_operations fsl_dcu_drm_fops = {
> > + .owner = THIS_MODULE,
> > + .open = drm_open,
> > + .release = drm_release,
> > + .unlocked_ioctl = drm_ioctl,
> > +#ifdef CONFIG_COMPAT
> > + .compat_ioctl = drm_compat_ioctl,
> > +#endif
> > + .poll = drm_poll,
> > + .read = drm_read,
> > + .llseek = no_llseek,
> > + .mmap = drm_gem_cma_mmap,
> > +};
> > +
> > +static struct drm_driver fsl_dcu_drm_driver = {
> > + .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET
> > + | DRIVER_PRIME,
> > + .load = fsl_dcu_load,
> > + .unload = fsl_dcu_unload,
> > + .preclose = fsl_dcu_drm_preclose,
> > + .irq_handler = fsl_dcu_drm_irq,
> > + .get_vblank_counter = drm_vblank_count,
> > + .enable_vblank = fsl_dcu_drm_enable_vblank,
> > + .disable_vblank = fsl_dcu_drm_disable_vblank,
> > + .gem_free_object = drm_gem_cma_free_object,
> > + .gem_vm_ops = &drm_gem_cma_vm_ops,
> > + .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
> > + .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
> > + .gem_prime_import = drm_gem_prime_import,
> > + .gem_prime_export = drm_gem_prime_export,
> > + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
> > + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
> > + .gem_prime_vmap = drm_gem_cma_prime_vmap,
> > + .gem_prime_vunmap = drm_gem_cma_prime_vunmap,
> > + .gem_prime_mmap = drm_gem_cma_prime_mmap,
> > + .dumb_create = drm_gem_cma_dumb_create,
> > + .dumb_map_offset = drm_gem_cma_dumb_map_offset,
> > + .dumb_destroy = drm_gem_dumb_destroy,
> > + .fops = &fsl_dcu_drm_fops,
> > + .name = "fsl-dcu-drm",
> > + .desc = "Freescale DCU DRM",
> > + .date = "20150213",
> > + .major = 1,
> > + .minor = 0,
> > +};
> > +
> > +#ifdef CONFIG_PM_SLEEP
> > +static int fsl_dcu_drm_pm_suspend(struct device *dev) {
> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> > +
> > + dcu_pixclk_disable();
> > + drm_kms_helper_poll_disable(fsl_dev->ddev);
> > + fsl_dcu_drm_crtc_suspend(&fsl_dev->crtc);
> > +
> > + return 0;
> > +}
> > +
> > +static int fsl_dcu_drm_pm_resume(struct device *dev) {
> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev);
> > +
> > + drm_modeset_lock_all(fsl_dev->ddev);
> > + fsl_dcu_drm_crtc_resume(&fsl_dev->crtc);
> > + drm_modeset_unlock_all(fsl_dev->ddev);
> > + drm_kms_helper_poll_enable(fsl_dev->ddev);
> > + dcu_pixclk_enable();
> > + return 0;
> > +}
> > +#endif
> > +
> > +static const struct dev_pm_ops fsl_dcu_drm_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend,
> > +fsl_dcu_drm_pm_resume) };
> > +
> > +static int fsl_dcu_drm_probe(struct platform_device *pdev) {
> > + return drm_platform_init(&fsl_dcu_drm_driver, pdev); }
> > +
> > +static int fsl_dcu_drm_remove(struct platform_device *pdev) {
> > + struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev);
> > +
> > + drm_put_dev(fsl_dev->ddev);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id fsl_dcu_of_match[] = {
> > + { .compatible = "fsl,dcu", },
> > + { },
> > +};
> > +MODULE_DEVICE_TABLE(of, fsl_dcu_of_match);
> > +
> > +static struct platform_driver fsl_dcu_drm_platform_driver = {
> > + .probe = fsl_dcu_drm_probe,
> > + .remove = fsl_dcu_drm_remove,
> > + .driver = {
> > + .owner = THIS_MODULE,
> > + .name = "fsl,dcu",
> > + .pm = &fsl_dcu_drm_pm_ops,
> > + .of_match_table = fsl_dcu_of_match,
> > + },
> > +};
> > +
> > +module_platform_driver(fsl_dcu_drm_platform_driver);
> > +
> > +MODULE_ALIAS("platform:fsl-dcu-drm");
> > +MODULE_DESCRIPTION("Freescale DCU DRM Driver");
> > +MODULE_LICENSE("GPL");
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> > new file mode 100644
> > index 0000000..cbdfefc
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_drv.h
> > @@ -0,0 +1,168 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_DRM_DRV_H__
> > +#define __FSL_DCU_DRM_DRV_H__
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/spinlock.h>
> > +#include <stddef.h>
> > +#include <drm/drm.h>
> > +#include <drm/drmP.h>
> > +#include <drm/drm_fb_helper.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_gem_cma_helper.h>
> > +#include <drm/drm_fb_cma_helper.h>
> > +
> > +#include "fsl_dcu_drm_crtc.h"
> > +#include "fsl_dcu_drm_plane.h"
> > +#include "fsl_dcu_drm_connector.h"
> > +#define DRIVER_NAME "fsl-dcu-fb"
> > +
> > +#define DCU_DCU_MODE 0x0010
> > +#define DCU_MODE_BLEND_ITER(x) ((x) << 20)
> > +#define DCU_MODE_RASTER_EN BIT(14)
> > +#define DCU_MODE_DCU_MODE(x) (x)
> > +#define DCU_MODE_DCU_MODE_MASK 0x03
> > +#define DCU_MODE_OFF 0
> > +#define DCU_MODE_NORMAL 1
> > +#define DCU_MODE_TEST 2
> > +#define DCU_MODE_COLORBAR 3
> > +
> > +#define DCU_BGND 0x0014
> > +#define DCU_BGND_R(x) ((x) << 16)
> > +#define DCU_BGND_G(x) ((x) << 8)
> > +#define DCU_BGND_B(x) (x)
> > +
> > +#define DCU_DISP_SIZE 0x0018
> > +#define DCU_DISP_SIZE_DELTA_Y(x) ((x) << 16)
> > +/*Regisiter value 1/16 of horizontal resolution*/
> > +#define DCU_DISP_SIZE_DELTA_X(x) ((x) >> 4)
> > +
> > +#define DCU_HSYN_PARA 0x001c
> > +#define DCU_HSYN_PARA_BP(x) ((x) << 22)
> > +#define DCU_HSYN_PARA_PW(x) ((x) << 11)
> > +#define DCU_HSYN_PARA_FP(x) (x)
> > +
> > +#define DCU_VSYN_PARA 0x0020
> > +#define DCU_VSYN_PARA_BP(x) ((x) << 22)
> > +#define DCU_VSYN_PARA_PW(x) ((x) << 11)
> > +#define DCU_VSYN_PARA_FP(x) (x)
> > +
> > +#define DCU_SYN_POL 0x0024
> > +#define DCU_SYN_POL_INV_PXCK_FALL (0 << 6)
> > +#define DCU_SYN_POL_NEG_REMAIN (0 << 5)
> > +#define DCU_SYN_POL_INV_VS_LOW BIT(1)
> > +#define DCU_SYN_POL_INV_HS_LOW (1)
> > +
> > +#define DCU_THRESHOLD 0x0028
> > +#define DCU_THRESHOLD_LS_BF_VS(x) ((x) << 16)
> > +#define DCU_THRESHOLD_OUT_BUF_HIGH(x) ((x) << 8)
> > +#define DCU_THRESHOLD_OUT_BUF_LOW(x) (x)
> > +#define BF_VS_VAL 0x03
> > +#define BUF_MAX_VAL 0x78
> > +#define BUF_MIN_VAL 0x0a
> > +
> > +#define DCU_INT_STATUS 0x002C
> > +#define DCU_INT_STATUS_UNDRUN BIT(1)
> > +
> > +#define DCU_INT_MASK 0x0030
> > +#define DCU_INT_MASK_UNDRUN BIT(1)
> > +#define DCU_INT_MASK_VBLANK BIT(3)
> > +
> > +#define DCU_DIV_RATIO 0x0054
> > +
> > +#define DCU_UPDATE_MODE 0x00cc
> > +#define DCU_UPDATE_MODE_MODE BIT(31)
> > +#define DCU_UPDATE_MODE_READREG BIT(30)
> > +
> > +#define DCU_DCFB_MAX 0x300
> > +
> > +#define DCU_CTRLDESCLN_1(x) (0x200 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_1_HEIGHT(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_1_WIDTH(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_2(x) (0x204 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_2_POSY(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_2_POSX(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_3(x) (0x208 + (x) * 0x40)
> > +
> > +#define DCU_CTRLDESCLN_4(x) (0x20c + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_4_EN BIT(31)
> > +#define DCU_CTRLDESCLN_4_TILE_EN BIT(30)
> > +#define DCU_CTRLDESCLN_4_DATA_SEL_CLUT BIT(29)
> > +#define DCU_CTRLDESCLN_4_SAFETY_EN BIT(28)
> > +#define DCU_CTRLDESCLN_4_TRANS(x) ((x) << 20)
> > +#define DCU_CTRLDESCLN_4_BPP(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_4_RLE_EN BIT(15)
> > +#define DCU_CTRLDESCLN_4_LUOFFS(x) ((x) << 4)
> > +#define DCU_CTRLDESCLN_4_BB_ON BIT(2)
> > +#define DCU_CTRLDESCLN_4_AB(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_5(x) (0x210 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_5_CKMAX_R(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_5_CKMAX_G(x) ((x) << 8)
> > +#define DCU_CTRLDESCLN_5_CKMAX_B(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_6(x) (0x214 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_6_CKMIN_R(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_6_CKMIN_G(x) ((x) << 8)
> > +#define DCU_CTRLDESCLN_6_CKMIN_B(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_7(x) (0x218 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_7_TILE_VER(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_7_TILE_HOR(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_8(x) (0x21c + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_8_FG_FCOLOR(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_9(x) (0x220 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_9_BG_BCOLOR(x) (x)
> > +
> > +#define DCU_CTRLDESCLN_10(x) (0x224 + (x) * 0x40)
> > +#define DCU_CTRLDESCLN_10_POST_SKIP(x) ((x) << 16)
> > +#define DCU_CTRLDESCLN_10_PRE_SKIP(x) (x)
> > +
> > +#define FSL_DCU_RGB565 4
> > +#define FSL_DCU_RGB888 5
> > +#define FSL_DCU_ARGB8888 6
> > +#define FSL_DCU_ARGB1555 11
> > +#define FSL_DCU_ARGB4444 12
> > +#define FSL_DCU_YUV422 14
> > +
> > +#define TCON_CTRL1 0x0000
> > +#define TCON_BYPASS_ENABLE BIT(29)
> > +
> > +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
> > +
> > +struct clk;
> > +struct device;
> > +struct drm_device;
> > +
> > +struct fsl_dcu_drm_device {
> > + struct device *dev;
> > + struct regmap *regmap;
> > + struct regmap *tcon_regmap;
> > + unsigned int irq;
> > + struct clk *clk;
> > + /*protects hardware register*/
> > + spinlock_t irq_lock;
> > + struct drm_device *ddev;
> > + struct drm_fbdev_cma *fbdev;
> > + struct fsl_dcu_drm_crtc crtc;
> > + struct drm_encoder encoder;
> > + struct fsl_dcu_drm_connector connector; };
> > +
> > +void fsl_dcu_fbdev_init(struct drm_device *dev);
> > +
> > +#endif /* __FSL_DCU_DRM_DRV_H__ */
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> > new file mode 100644
> > index 0000000..f8ef0e1
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_fbdev.c
> > @@ -0,0 +1,26 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms of the GNU General Public License version 2 as
> > +published by
> > + * the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > +but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + */
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_fb_cma_helper.h>
> > +
> > +#include "fsl_dcu_drm_drv.h"
> > +
> > +/* initialize fbdev helper */
> > +void fsl_dcu_fbdev_init(struct drm_device *dev) {
> > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev);
> > +
> > + fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1); }
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> > new file mode 100644
> > index 0000000..4a840fb
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.c
> > @@ -0,0 +1,42 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_atomic_helper.h>
> > +
> > +#include "fsl_dcu_drm_crtc.h"
> > +#include "fsl_dcu_drm_connector.h"
> > +#include "fsl_dcu_drm_drv.h"
> > +
> > +static const struct drm_mode_config_funcs fsl_dcu_drm_mode_config_funcs
> = {
> > + .fb_create = drm_fb_cma_create,
> > + .atomic_check = drm_atomic_helper_check,
> > + .atomic_commit = drm_atomic_helper_commit, };
> > +
> > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev) {
> > + drm_mode_config_init(fsl_dev->ddev);
> > +
> > + fsl_dev->ddev->mode_config.min_width = 0;
> > + fsl_dev->ddev->mode_config.min_height = 0;
> > + fsl_dev->ddev->mode_config.max_width = 2031;
> > + fsl_dev->ddev->mode_config.max_height = 2047;
> > + fsl_dev->ddev->mode_config.funcs = &fsl_dcu_drm_mode_config_funcs;
> > +
> > + drm_kms_helper_poll_init(fsl_dev->ddev);
> > + fsl_dcu_drm_crtc_create(fsl_dev);
> > + fsl_dcu_drm_encoder_create(fsl_dev);
> > + fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder);
> > + drm_mode_config_reset(fsl_dev->ddev);
> > +
> > + return 0;
> > +}
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> > new file mode 100644
> > index 0000000..b9bd299
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_kms.h
> > @@ -0,0 +1,17 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_DRM_KMS_H__
> > +#define __FSL_DCU_DRM_KMS_H__
> > +
> > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev);
> > +
> > +#endif /* __FSL_DCU_DRM_KMS_H__ */
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> > new file mode 100644
> > index 0000000..b7b4405
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.c
> > @@ -0,0 +1,187 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#include <drm/drmP.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_crtc_helper.h>
> > +#include <drm/drm_fb_cma_helper.h>
> > +#include <drm/drm_gem_cma_helper.h>
> > +#include <linux/regmap.h>
> > +#include <drm/drm_plane_helper.h>
> > +#include <drm/drm_atomic_helper.h>
> > +
> > +#include "fsl_dcu_drm_drv.h"
> > +#include "fsl_dcu_drm_kms.h"
> > +#include "fsl_dcu_drm_plane.h"
> > +
> > +#define to_fsl_dcu_plane(plane) \
> > + container_of(plane, struct fsl_dcu_drm_plane, plane)
> > +
> > +static int
> > +fsl_dcu_drm_plane_prepare_fb(struct drm_plane *plane,
> > + struct drm_framebuffer *fb,
> > + const struct drm_plane_state *new_state) {
> > + return 0;
> > +}
> > +
> > +static void
> > +fsl_dcu_drm_plane_cleanup_fb(struct drm_plane *plane,
> > + struct drm_framebuffer *fb,
> > + const struct drm_plane_state *new_state) { }
> > +
> > +static int fsl_dcu_drm_plane_atomic_check(struct drm_plane *plane,
> > + struct drm_plane_state *state) {
> > + return 0;
> > +}
> > +
> > +static void fsl_dcu_drm_plane_atomic_disable(struct drm_plane *plane,
> > + struct drm_plane_state *old_state) { }
> > +
> > +void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane,
> > + struct drm_plane_state *old_state) {
> > + struct fsl_dcu_drm_device *fsl_dev = plane->dev->dev_private;
> > + struct drm_plane_state *state = plane->state;
> > + struct drm_framebuffer *fb = plane->state->fb;
> > + u32 index, alpha, bpp;
> > + struct drm_gem_cma_object *gem;
> > + struct fsl_dcu_drm_plane *fsl_plane = to_fsl_dcu_plane(plane);
> > +
> > + index = fsl_plane->index;
> > + gem = drm_fb_cma_get_gem_obj(fb, 0);
> > +
> > + switch (fb->pixel_format) {
> > + case DRM_FORMAT_RGB565:
> > + bpp = FSL_DCU_RGB565;
> > + alpha = 0xff;
> > + break;
> > + case DRM_FORMAT_RGB888:
> > + bpp = FSL_DCU_RGB888;
> > + alpha = 0xff;
> > + break;
> > + case DRM_FORMAT_ARGB8888:
> > + bpp = FSL_DCU_ARGB8888;
> > + alpha = 0xff;
> > + break;
> > + case DRM_FORMAT_BGRA4444:
> > + bpp = FSL_DCU_ARGB4444;
> > + alpha = 0xff;
> > + break;
> > + case DRM_FORMAT_ARGB1555:
> > + bpp = FSL_DCU_ARGB1555;
> > + alpha = 0xff;
> > + break;
> > + case DRM_FORMAT_YUV422:
> > + bpp = FSL_DCU_YUV422;
> > + alpha = 0xff;
> > + break;
> > + default:
> > + return;
> > + }
> > +
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(index),
> > + DCU_CTRLDESCLN_1_HEIGHT(state->crtc_h) |
> > + DCU_CTRLDESCLN_1_WIDTH(state->crtc_w));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(index),
> > + DCU_CTRLDESCLN_2_POSY(state->crtc_y) |
> > + DCU_CTRLDESCLN_2_POSX(state->crtc_x));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(index), gem->paddr);
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(index),
> > + DCU_CTRLDESCLN_4_EN |
> > + DCU_CTRLDESCLN_4_TRANS(alpha) |
> > + DCU_CTRLDESCLN_4_BPP(bpp) |
> > + DCU_CTRLDESCLN_4_AB(2));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(index),
> > + DCU_CTRLDESCLN_5_CKMAX_R(0xFF) |
> > + DCU_CTRLDESCLN_5_CKMAX_G(0xFF) |
> > + DCU_CTRLDESCLN_5_CKMAX_B(0xFF));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(index),
> > + DCU_CTRLDESCLN_6_CKMIN_R(0) |
> > + DCU_CTRLDESCLN_6_CKMIN_G(0) |
> > + DCU_CTRLDESCLN_6_CKMIN_B(0));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(index),
> > + DCU_CTRLDESCLN_8_FG_FCOLOR(0));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(index),
> > + DCU_CTRLDESCLN_9_BG_BCOLOR(0));
> > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(index),
> > + DCU_CTRLDESCLN_10_POST_SKIP(0) |
> > + DCU_CTRLDESCLN_10_PRE_SKIP(0));
> > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE,
> > +DCU_UPDATE_MODE_READREG); }
> > +
> > +int fsl_dcu_drm_plane_disable(struct drm_plane *plane) {
> > + return 0;
> > +}
> > +
> > +void fsl_dcu_drm_plane_destroy(struct drm_plane *plane) {
> > + fsl_dcu_drm_plane_disable(plane);
> > + drm_plane_cleanup(plane);
> > +}
> > +
> > +static const uint32_t fsl_dcu_drm_plane_formats[] = {
> > + DRM_FORMAT_RGB565,
> > + DRM_FORMAT_RGB888,
> > + DRM_FORMAT_ARGB8888,
> > + DRM_FORMAT_ARGB4444,
> > + DRM_FORMAT_ARGB1555,
> > + DRM_FORMAT_YUV422,
> > +};
> > +
> > +static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = {
> > + .update_plane = drm_plane_helper_update,
> > + .disable_plane = drm_plane_helper_disable,
> > + .destroy = fsl_dcu_drm_plane_destroy,
> > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
> > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
> > + .reset = drm_atomic_helper_plane_reset, };
> > +
> > +static const struct drm_plane_helper_funcs
> fsl_dcu_drm_plane_helper_funcs = {
> > + .prepare_fb = fsl_dcu_drm_plane_prepare_fb,
> > + .cleanup_fb = fsl_dcu_drm_plane_cleanup_fb,
> > + .atomic_check = fsl_dcu_drm_plane_atomic_check,
> > + .atomic_update = fsl_dcu_drm_plane_atomic_update,
> > + .atomic_disable = fsl_dcu_drm_plane_atomic_disable, };
> > +
> > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device
> > +*dev) {
> > + struct drm_plane *primary;
> > + int ret;
> > +
> > + primary = kzalloc(sizeof(*primary), GFP_KERNEL);
> > + if (!primary) {
> > + DRM_DEBUG_KMS("Failed to allocate primary plane\n");
> > + return NULL;
> > + }
> > +
> > + /* possible_crtc's will be filled in later by crtc_init */
> > + ret = drm_universal_plane_init(dev, primary, 0,
> > + &fsl_dcu_drm_plane_funcs,
> > + fsl_dcu_drm_plane_formats,
> > + ARRAY_SIZE(fsl_dcu_drm_plane_formats),
> > + DRM_PLANE_TYPE_PRIMARY);
> > + if (ret) {
> > + kfree(primary);
> > + primary = NULL;
> > + }
> > + drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs);
> > +
> > + return primary;
> > +}
> > diff --git a/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> > b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> > new file mode 100644
> > index 0000000..ccbfa61
> > --- /dev/null
> > +++ b/drivers/gpu/drm/fsl/fsl_dcu_drm_plane.h
> > @@ -0,0 +1,23 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_DRM_PLANE_H__
> > +#define __FSL_DCU_DRM_PLANE_H__
> > +
> > +struct fsl_dcu_drm_device;
> > +struct fsl_dcu_drm_plane {
> > + struct drm_plane plane;
> > + unsigned int index;
> > +};
> > +
> > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device
> > +*dev);
> > +
> > +#endif /* __FSL_DCU_DRM_PLANE_H__ */
> > diff --git a/include/linux/fsl/dcu.h b/include/linux/fsl/dcu.h new
> > file mode 100644 index 0000000..1873057
> > --- /dev/null
> > +++ b/include/linux/fsl/dcu.h
> > @@ -0,0 +1,22 @@
> > +/*
> > + * Copyright 2015 Freescale Semiconductor, Inc.
> > + *
> > + * Freescale DCU drm device driver
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify
> > + * it under the terms of the GNU General Public License as published
> > +by
> > + * the Free Software Foundation; either version 2 of the License, or
> > + * (at your option) any later version.
> > + */
> > +
> > +#ifndef __FSL_DCU_H__
> > +#define __FSL_DCU_H__
> > +
> > +#define SCFG_PIXCLKCR 0x28
> > +#define PXCK_ENABLE BIT(31)
> > +#define PXCK_DISABLE 0
> > +
> > +void dcu_pixclk_enable(void);
> > +void dcu_pixclk_disable(void);
> > +
> > +#endif /* __FSL_DCU_H__ */
> > _______________________________________________
> > linux-arm-kernel mailing list
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel