[PATCH v3 0/3] Add ktd2692 Flash LED driver using LED Flash class

[Ingi Kim]

This patch adds ktd2692 Flash LED driver with LED Flash class

Change in v3:
	- Clean up the code
	- Add aux gpio pin to control Flash LED

Change in v2:
	- Introduction of LED Flash class as Jacek's comment
	- Supplement of binding documentation
	- Rename gpio control pin and remove unused pin
	- Add regulator for the Flash LED

Ingi Kim (3):
  of: Add vendor prefix for Kinetic technologies
  leds: ktd2692: add device tree bindings for ktd2692
  leds: Add ktd2692 flash LED driver

 .../devicetree/bindings/leds/leds-ktd2692.txt      |  34 ++
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 drivers/leds/Kconfig                               |   9 +
 drivers/leds/Makefile                              |   1 +
 drivers/leds/leds-ktd2692.c                        | 438 +++++++++++++++++++++
 5 files changed, 483 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
 create mode 100644 drivers/leds/leds-ktd2692.c

-- 
2.0.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/