[PATCH 0/4] ARM: berlin: ADC support

[Antoine Tenart]

Hi,

The Berlin ADC provides 8 channels, with one connected to a temperature
sensor. The temperature sensor has its own registers and both the ADC
and the temperature sensor need to be configured when using it.

This series is based on the two Berlin controllers rework series:
- https://lkml.org/lkml/2015/3/6/511
- https://lkml.org/lkml/2015/3/6/535

Antoine

Antoine Tenart (4):
  iio: adc: add support for Berlin
  Documentation: bindings: document the Berlin ADC driver
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: enable the ADC on the BG2Q DMP

 .../devicetree/bindings/iio/adc/berlin2_adc.txt    |  19 +
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts         |   4 +
 arch/arm/boot/dts/berlin2q.dtsi                    |   8 +
 drivers/iio/adc/Kconfig                            |   7 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/berlin-adc.c                       | 397 +++++++++++++++++++++
 6 files changed, 436 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
 create mode 100644 drivers/iio/adc/berlin-adc.c

-- 
2.3.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/