[PATCH 0/3] ARM: omap5/dra7/x15: Thermal dts patches

[Nishanth Menon]

Hi,

Here are a few pending patches for DRA7/ OMAP5 and patch hooking the
GPIO fan to the thermal framework.

Tested on BeagleBoard-X15, uEVM with next-20150320. (just load up
cpufreq_dt and gpio_fan modules with omap2plus_defconfig, run cpuburn
to generate thermal and just wait for the fan to trigger - and it does-
we dont hit the frequency throttling temps)

The patches are based on
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git
branch: omap-for-v4.1/dt-v2 10709c0858d8 ARM: dts: Update Nanobone dts file

The patch #3(gpio fan-thermal hookup) depends on 
(from linus master):
12ca7188468e thermal: Introduce dummy functions when thermal is not defined
and the following currently in linux-next(next-20150320) queued for future.
b5cf88e46bad (gpio-fan): Add thermal control hooks

Keerthy (1):
  ARM: dts: DRA7: Add bandgap and related thermal nodes

Nishanth Menon (1):
  ARM: dts: am57xx-beagle-x15: Add thermal map

Tero Kristo (1):
  ARM: dts: OMAP5+: separate the cpu thermal zone definition from omap4

 arch/arm/boot/dts/am57xx-beagle-x15.dts  |   49 ++++++++++++++++++++++++++++++
 arch/arm/boot/dts/dra7.dtsi              |   12 ++++++++
 arch/arm/boot/dts/dra72x.dtsi            |    9 ++++++
 arch/arm/boot/dts/dra74x.dtsi            |    9 ++++++
 arch/arm/boot/dts/omap5-cpu-thermal.dtsi |   41 +++++++++++++++++++++++++
 arch/arm/boot/dts/omap5.dtsi             |    2 +-
 6 files changed, 121 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/omap5-cpu-thermal.dtsi

Regards,
Nishanth Menon
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/