[PATCH 1/1] X86, UV: Update UV APIC driver check

[Mike Travis]

Fix a bug in the oem check function that determines if the system
is a UV system and the BIOS is compatible with the kernel's UV apic
driver.  This prevents some possibly obscure panics and guards the
system against being started on SGI hardware that does not have the
required kernel support.  Also add update for new UV3000 system.

The first "OEM" check was also optimized to return faster if the
system is not an SGI or UV system.

Signed-off-by: Mike Travis <travis@xxxxxxx>
Acked-by: Hedi Berriche <hedi@xxxxxxx>
Acked-by: Dimitri Sivanich <sivanich@xxxxxxx>
---
 arch/x86/kernel/apic/x2apic_uv_x.c |   84 ++++++++++++++++++++++++-------------
 1 file changed, 56 insertions(+), 28 deletions(-)

--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -144,33 +144,60 @@ static void __init uv_set_apicid_hibit(v
 
 static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 {
-	int pnodeid, is_uv1, is_uv2, is_uv3;
+	int pnodeid;
+	int ret;
 
-	is_uv1 = !strcmp(oem_id, "SGI");
-	is_uv2 = !strcmp(oem_id, "SGI2");
-	is_uv3 = !strncmp(oem_id, "SGI3", 4);	/* there are varieties of UV3 */
-	if (is_uv1 || is_uv2 || is_uv3) {
-		uv_hub_info->hub_revision =
-			(is_uv1 ? UV1_HUB_REVISION_BASE :
-			(is_uv2 ? UV2_HUB_REVISION_BASE :
-				  UV3_HUB_REVISION_BASE));
-		pnodeid = early_get_pnodeid();
-		early_get_apic_pnode_shift();
-		x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
-		x86_platform.nmi_init = uv_nmi_init;
-		if (!strcmp(oem_table_id, "UVL"))
-			uv_system_type = UV_LEGACY_APIC;
-		else if (!strcmp(oem_table_id, "UVX"))
-			uv_system_type = UV_X2APIC;
-		else if (!strcmp(oem_table_id, "UVH")) {
-			__this_cpu_write(x2apic_extra_bits,
-				pnodeid << uvh_apicid.s.pnode_shift);
-			uv_system_type = UV_NON_UNIQUE_APIC;
-			uv_set_apicid_hibit();
-			return 1;
-		}
+	if (strncmp(oem_id, "SGI", 3) != 0)
+		return 0;
+
+	/*
+	 * Determine UV arch type.
+	 *   SGI: UV100/1000
+	 *   SGI2: UV2000/3000
+	 *   SGI3: UV300 (truncated to 4 chars because of different varieties)
+	 */
+	uv_hub_info->hub_revision =
+		!strncmp(oem_id, "SGI3", 4) ? UV3_HUB_REVISION_BASE :
+		!strcmp(oem_id, "SGI2") ? UV2_HUB_REVISION_BASE :
+		!strcmp(oem_id, "SGI") ? UV1_HUB_REVISION_BASE : 0;
+
+	if (uv_hub_info->hub_revision == 0)
+		goto badbios;
+
+	pnodeid = early_get_pnodeid();
+	early_get_apic_pnode_shift();
+	x86_platform.is_untracked_pat_range =  uv_is_untracked_pat_range;
+	x86_platform.nmi_init = uv_nmi_init;
+
+	if (!strcmp(oem_table_id, "UVX")) {		/* most common */
+		uv_system_type = UV_X2APIC;
+		ret = 0;
+
+	} else if (!strcmp(oem_table_id, "UVH")) {	/* only UV1 systems */
+		uv_system_type = UV_NON_UNIQUE_APIC;
+		__this_cpu_write(x2apic_extra_bits,
+			pnodeid << uvh_apicid.s.pnode_shift);
+		uv_set_apicid_hibit();
+		ret = 1;
+
+	} else	if (!strcmp(oem_table_id, "UVL")) {	/* only used for */
+		uv_system_type = UV_LEGACY_APIC;	/* very small systems */
+		ret = 0;
+
+	} else {
+		goto badbios;
 	}
-	return 0;
+
+	pr_info("UV: OEM IDs %s/%s, System/HUB Types %d/%d uv_apic %d\n",
+		oem_id, oem_table_id, uv_system_type,
+		uv_min_hub_revision_id, ret);
+
+	return ret;
+
+badbios:
+	pr_err("UV: OEM_ID:%s OEM_TABLE_ID:%s\n", oem_id, oem_table_id);
+	pr_err("Current BIOS not supported, update kernel and/or BIOS\n");
+	BUG();
 }
 
 enum uv_system_type get_uv_system_type(void)
@@ -854,9 +881,10 @@ void __init uv_system_init(void)
 	unsigned long mmr_base, present, paddr;
 	unsigned short pnode_mask;
 	unsigned char n_lshift;
-	char *hub = (is_uv1_hub() ? "UV1" :
-		    (is_uv2_hub() ? "UV2" :
-				    "UV3"));
+	char *hub = (is_uv1_hub() ? "UV100/1000" :
+		    (is_uv2_hub() ? "UV2000/3000" :
+		    (is_uv3_hub() ? "UV300" :
+				    "Unknown UV")));
 
 	pr_info("UV: Found %s hub\n", hub);
 	map_low_mmrs();

-- 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/