Re: [PATCH v3 3/4] drm/msm/mdp5: Add START signal to kick off certain pipelines
From: "Stéphane Viau"
Date: Mon Mar 23 2015 - 18:10:33 EST
Hi Archit,
> Hi Stephane,
>
> On 03/14/2015 01:19 AM, Stephane Viau wrote:
>> Some interfaces (WB, DSI Command Mode) need to be kicked off
>> through a START Signal. This signal needs to be sent at the right
>> time and requests in some cases to keep track of the pipeline
>> status (eg: whether pipeline registers are flushed AND output WB
>> buffers are ready, in case of WB interface).
>>
>> Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c | 2 +
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h | 7 +-
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 31 ++--
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.c | 247
>> ++++++++++++++++++++++++----
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_ctl.h | 72 +++-----
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 13 +-
>> drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.h | 1 +
>> 7 files changed, 276 insertions(+), 97 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> index c078f30..72c075a 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> @@ -31,6 +31,7 @@ const struct mdp5_cfg_hw msm8x74_config = {
>> .ctl = {
>> .count = 5,
>> .base = { 0x00600, 0x00700, 0x00800, 0x00900, 0x00a00 },
>> + .flush_hw_mask = 0x0003ffff,
>> },
>> .pipe_vig = {
>> .count = 3,
>> @@ -78,6 +79,7 @@ const struct mdp5_cfg_hw apq8084_config = {
>> .ctl = {
>> .count = 5,
>> .base = { 0x00600, 0x00700, 0x00800, 0x00900, 0x00a00 },
>> + .flush_hw_mask = 0x003fffff,
>
> msm8x16 would require a flush_hw_mask too, it should be 0x32a59 if I'm
> not wrong. Could you please add it for the next revision, or as a part
> of the 8x16 hw cfg patch?
Correct; thanks for pointing this out.
IMO, this value should be 0x4003ffff because the fields are actually
present in the register (even though the interfaces/pipes.etc. are not).
Anyway, these bits won't be accessed because the driver won't even allow
the usage of the corresponding resources.
I will update in the v2 of "drm/msm/mdp5: Add hardware configuration for
msm8x16".
Thanks,
Stephane.
>
> Thanks,
> Archit
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/