Re: [PATCH v3] Add virtio-input driver.

From: Dmitry Torokhov
Date: Tue Mar 24 2015 - 13:28:19 EST

On Tue, Mar 24, 2015 at 06:22:36PM +0100, Michael S. Tsirkin wrote:
> On Tue, Mar 24, 2015 at 09:23:37AM -0700, Dmitry Torokhov wrote:
> > On Tue, Mar 24, 2015 at 11:36:31AM +0100, Michael S. Tsirkin wrote:
> > > On Tue, Mar 24, 2015 at 08:32:01AM +0100, Gerd Hoffmann wrote:
> > > > virtio-input is basically evdev-events-over-virtio, so this driver isn't
> > > > much more than reading configuration from config space and forwarding
> > > > incoming events to the linux input layer.
> > > >
> > > > Signed-off-by: Gerd Hoffmann <kraxel@xxxxxxxxxx>
> > >
> > > Looks pretty neat overall. I think I still see some
> > > small issues, but it's getting there.
> > >
> > > > ---
> > > > MAINTAINERS | 6 +
> > > > drivers/virtio/Kconfig | 10 ++
> > > > drivers/virtio/Makefile | 1 +
> > > > drivers/virtio/virtio_input.c | 313 ++++++++++++++++++++++++++++++++++++++
> > > > include/uapi/linux/Kbuild | 1 +
> > > > include/uapi/linux/virtio_ids.h | 1 +
> > > > include/uapi/linux/virtio_input.h | 76 +++++++++
> > > > 7 files changed, 408 insertions(+)
> > > > create mode 100644 drivers/virtio/virtio_input.c
> > > > create mode 100644 include/uapi/linux/virtio_input.h
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > > index 358eb01..6f233dd 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -10442,6 +10442,12 @@ S: Maintained
> > > > F: drivers/vhost/
> > > > F: include/uapi/linux/vhost.h
> > > >
> > > > +VIRTIO INPUT DRIVER
> > > > +M: Gerd Hoffmann <kraxel@xxxxxxxxxx>
> > > > +S: Maintained
> > > > +F: drivers/virtio/virtio_input.c
> > > > +F: include/uapi/linux/virtio_input.h
> > > > +
> > > > VIA RHINE NETWORK DRIVER
> > > > M: Roger Luethi <rl@xxxxxxxxxxx>
> > > > S: Maintained
> > > > diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> > > > index b546da5..cab9f3f 100644
> > > > --- a/drivers/virtio/Kconfig
> > > > +++ b/drivers/virtio/Kconfig
> > > > @@ -48,6 +48,16 @@ config VIRTIO_BALLOON
> > > >
> > > > If unsure, say M.
> > > >
> > > > +config VIRTIO_INPUT
> > > > + tristate "Virtio input driver"
> > > > + depends on VIRTIO
> > > > + depends on INPUT
> > > > + ---help---
> > > > + This driver supports virtio input devices such as
> > > > + keyboards, mice and tablets.
> > > > +
> > > > + If unsure, say M.
> > > > +
> > > > config VIRTIO_MMIO
> > > > tristate "Platform bus driver for memory mapped virtio devices"
> > > > depends on HAS_IOMEM
> > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > index d85565b..41e30e3 100644
> > > > --- a/drivers/virtio/Makefile
> > > > +++ b/drivers/virtio/Makefile
> > > > @@ -4,3 +4,4 @@ obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
> > > > obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
> > > > +obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> > > > diff --git a/drivers/virtio/virtio_input.c b/drivers/virtio/virtio_input.c
> > > > new file mode 100644
> > > > index 0000000..cf112b2
> > > > --- /dev/null
> > > > +++ b/drivers/virtio/virtio_input.c
> > > > @@ -0,0 +1,313 @@
> > > > +#include <linux/module.h>
> > > > +#include <linux/virtio.h>
> > > > +#include <linux/input.h>
> > > > +
> > > > +#include <uapi/linux/virtio_ids.h>
> > > > +#include <uapi/linux/virtio_input.h>
> > > > +
> > > > +struct virtio_input {
> > > > + struct virtio_device *vdev;
> > > > + struct input_dev *idev;
> > > > + char name[64];
> > > > + char serial[64];
> > > > + char phys[64];
> > > > + struct virtqueue *evt, *sts;
> > > > + struct virtio_input_event evts[64];
> > > > + spinlock_t lock;
> > > > +};
> > > > +
> > > > +static void virtinput_queue_evtbuf(struct virtio_input *vi,
> > > > + struct virtio_input_event *evtbuf)
> > > > +{
> > > > + struct scatterlist sg[1];
> > > > +
> > > > + sg_init_one(sg, evtbuf, sizeof(*evtbuf));
> > > > + virtqueue_add_inbuf(vi->evt, sg, 1, evtbuf, GFP_ATOMIC);
> > > > +}
> > > > +
> > > > +static void virtinput_recv_events(struct virtqueue *vq)
> > > > +{
> > > > + struct virtio_input *vi = vq->vdev->priv;
> > > > + struct virtio_input_event *event;
> > > > + unsigned long flags;
> > > > + unsigned int len;
> > > > +
> > > > + spin_lock_irqsave(&vi->lock, flags);
> > > > + while ((event = virtqueue_get_buf(vi->evt, &len)) != NULL) {
> > > > + input_event(vi->idev,
> > > > + le16_to_cpu(event->type),
> > > > + le16_to_cpu(event->code),
> > > > + le32_to_cpu(event->value));
> > >
> > > What happens if input layer gets an
> > > unexpected event code or value?
> > > Or does something prevent it?
> > >
> > >
> > >
> > > > + virtinput_queue_evtbuf(vi, event);
> > > > + }
> > > > + virtqueue_kick(vq);
> > > > + spin_unlock_irqrestore(&vi->lock, flags);
> > > > +}
> > > > +
> > > > +static int virtinput_send_status(struct virtio_input *vi,
> > > > + u16 type, u16 code, s32 value)
> > > > +{
> > > > + struct virtio_input_event *stsbuf;
> > > > + struct scatterlist sg[1];
> > > > + unsigned long flags;
> > > > + int rc;
> > > > +
> > > > + stsbuf = kzalloc(sizeof(*stsbuf), GFP_ATOMIC);
> > > > + if (!stsbuf)
> > > > + return -ENOMEM;
> > > > +
> > > > + stsbuf->type = cpu_to_le16(type);
> > > > + stsbuf->code = cpu_to_le16(code);
> > > > + stsbuf->value = cpu_to_le32(value);
> > > > + sg_init_one(sg, stsbuf, sizeof(*stsbuf));
> > > > +
> > > > + spin_lock_irqsave(&vi->lock, flags);
> > > > + rc = virtqueue_add_outbuf(vi->sts, sg, 1, stsbuf, GFP_ATOMIC);
> > > > + virtqueue_kick(vi->sts);
> > > > + spin_unlock_irqrestore(&vi->lock, flags);
> >
> > I think locking is wrong here. This is basically input_dev->event()
> > which is called with input_dev->event_lock spinlock held, and it is
> > taking vi->lock. OTOH virtinput_recv_events() takes vi->lock and then
> > calls input_event(), which will try taking input_dev->event_lock. It is
> > bound to deadlock at some point.
> >
> > I guess the easiest way would be to drop vi->lock() after fetching
> > virtio event and before calling input_event().
>
> Or just always use event_lock for event vq, leave vq->lock for
> status vq only.
>
> > > > +
> > > > + if (rc != 0)
> > > > + kfree(stsbuf);
> > > > + return rc;
> > >
> > > This means that caller will get errors if it happens to call
> > > send_status at a rate that's faster than host's consumption of them.
> > > To me this looks wrong.
> > > Poking at input layer, it seems to simply discard errors.
> > > Is it always safe to discard status updates?
> > > If yes, some kind of comment to clarify the logic would
> > > make sense IMHO.
> > >
> > >
> > >
> > > > +}
> > > > +
> > > > +static void virtinput_recv_status(struct virtqueue *vq)
> > > > +{
> > > > + struct virtio_input *vi = vq->vdev->priv;
> > > > + struct virtio_input_event *stsbuf;
> > > > + unsigned long flags;
> > > > + unsigned int len;
> > > > +
> > > > + spin_lock_irqsave(&vi->lock, flags);
> > > > + while ((stsbuf = virtqueue_get_buf(vi->sts, &len)) != NULL)
> > > > + kfree(stsbuf);
> > > > + spin_unlock_irqrestore(&vi->lock, flags);
> > > > +}
> > > > +
> > > > +static int virtinput_status(struct input_dev *idev, unsigned int type,
> > > > + unsigned int code, int value)
> > > > +{
> > > > + struct virtio_input *vi = input_get_drvdata(idev);
> > > > +
> > > > + return virtinput_send_status(vi, type, code, value);
> > > > +}
> > > > +
> > > > +static size_t virtinput_cfg_select(struct virtio_input *vi,
> > > > + u8 select, u8 subsel)
> > > > +{
> > > > + u8 size;
> > > > +
> > > > + virtio_cwrite(vi->vdev, struct virtio_input_config, select, &select);
> > > > + virtio_cwrite(vi->vdev, struct virtio_input_config, subsel, &subsel);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, size, &size);
> > > > + return size;
> > > > +}
> > > > +
> > > > +static void virtinput_cfg_bits(struct virtio_input *vi, int select, int subsel,
> > > > + unsigned long *bits, unsigned int bitcount)
> > > > +{
> > > > + unsigned int bit;
> > > > + size_t bytes;
> > > > + u8 *virtio_bits;
> > > > +
> > > > + bytes = virtinput_cfg_select(vi, select, subsel);
> > > > + if (!bytes)
> > > > + return;
> > >
> > > How about limiting bytes to sizeof struct virtio_input_config->u?
> > >
> > > > + if (bitcount > bytes*8)
> > > > + bitcount = bytes*8;
> > >
> > > Space around * pls.
> > >
> > > > +
> > > > + /*
> > > > + * Bitmap in virtio config space is a simple stream of bytes,
> > > > + * with the first byte carrying bits 0-7, second bits 8-15 and
> > > > + * so on.
> > > > + */
> > > > + virtio_bits = kzalloc(bytes, GFP_KERNEL);
> > > > + if (!virtio_bits)
> > > > + return;
> > > > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > > > + virtio_bits, bytes);
> > > > + for (bit = 0; bit < bitcount; bit++) {
> > > > + if (virtio_bits[bit / 8] & (1 << (bit % 8)))
> > > > + __set_bit(bit, bits);
> > > > + }
> > > > + kfree(virtio_bits);
> > > > +
> > > > + if (select == VIRTIO_INPUT_CFG_EV_BITS)
> > > > + __set_bit(subsel, vi->idev->evbit);
> > > > +}
> > > > +
> > > > +static void virtinput_cfg_abs(struct virtio_input *vi, int abs)
> > > > +{
> > > > + u32 mi, ma, re, fu, fl;
> > > > +
> > > > + virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ABS_INFO, abs);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.min, &mi);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.max, &ma);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.res, &re);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.fuzz, &fu);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config, u.abs.flat, &fl);
> > > > + input_set_abs_params(vi->idev, abs, mi, ma, fu, fl);
> > > > + input_abs_set_res(vi->idev, abs, re);
> > > > +}
> > > > +
> > > > +static int virtinput_init_vqs(struct virtio_input *vi)
> > > > +{
> > > > + struct virtqueue *vqs[2];
> > > > + vq_callback_t *cbs[] = { virtinput_recv_events,
> > > > + virtinput_recv_status };
> > > > + static const char * names[] = { "events", "status" };
> > >
> > > No space between * and names expected
> > >
> > > > + int i, err, size;
> > > > +
> > > > + err = vi->vdev->config->find_vqs(vi->vdev, 2, vqs, cbs, names);
> > > > + if (err)
> > > > + return err;
> > > > + vi->evt = vqs[0];
> > > > + vi->sts = vqs[1];
> > > > +
> > > > + size = virtqueue_get_vring_size(vi->evt);
> > > > + if (size > ARRAY_SIZE(vi->evts))
> > > > + size = ARRAY_SIZE(vi->evts);
> > > > + for (i = 0; i < size; i++)
> > > > + virtinput_queue_evtbuf(vi, &vi->evts[i]);
> > > > + virtqueue_kick(vi->evt);
> > > > +
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int virtinput_probe(struct virtio_device *vdev)
> > > > +{
> > > > + struct virtio_input *vi;
> > > > + size_t size;
> > > > + int abs, err;
> > > > +
> > > > + if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1))
> > > > + return -ENODEV;
> > > > +
> > > > + vi = kzalloc(sizeof(*vi), GFP_KERNEL);
> > > > + if (!vi)
> > > > + return -ENOMEM;
> > > > +
> > > > + vdev->priv = vi;
> > > > + vi->vdev = vdev;
> > > > + spin_lock_init(&vi->lock);
> > > > +
> > > > + err = virtinput_init_vqs(vi);
> > > > + if (err)
> > > > + goto err_init_vq;
> > > > +
> > > > + vi->idev = input_allocate_device();
> > > > + if (!vi->idev) {
> > > > + err = -ENOMEM;
> > > > + goto err_input_alloc;
> > > > + }
> > > > + input_set_drvdata(vi->idev, vi);
> > > > +
> > > > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_NAME, 0);
> > > > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > > > + vi->name, min(size, sizeof(vi->name)));
> > > > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_SERIAL, 0);
> > > > + virtio_cread_bytes(vi->vdev, offsetof(struct virtio_input_config, u),
> > > > + vi->serial, min(size, sizeof(vi->serial)));
> > > > + snprintf(vi->phys, sizeof(vi->phys),
> > > > + "virtio%d/input0", vdev->index);
> > > > + vi->idev->name = vi->name;
> > > > + vi->idev->phys = vi->phys;
> > > > + vi->idev->uniq = vi->serial;
> > > > +
> > > > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_ID_DEVIDS, 0);
> > > > + if (size >= 8) {
> > >
> > > What does 8 mean here? Should be sizeof virtio_input_devids?
> > >
> > > > + virtio_cread(vi->vdev, struct virtio_input_config,
> > > > + u.ids.bustype, &vi->idev->id.bustype);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config,
> > > > + u.ids.vendor, &vi->idev->id.vendor);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config,
> > > > + u.ids.product, &vi->idev->id.product);
> > > > + virtio_cread(vi->vdev, struct virtio_input_config,
> > > > + u.ids.version, &vi->idev->id.version);
> > > > + } else {
> > > > + vi->idev->id.bustype = BUS_VIRTUAL;
> > > > + }
> > > > +
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_PROP_BITS, 0,
> > > > + vi->idev->propbit, INPUT_PROP_CNT);
> > > > + size = virtinput_cfg_select(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_REP);
> > > > + if (size)
> > > > + __set_bit(EV_REP, vi->idev->evbit);
> > > > +
> > > > + vi->idev->dev.parent = &vdev->dev;
> > > > + vi->idev->event = virtinput_status;
> > > > +
> > > > + /* device -> kernel */
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_KEY,
> > > > + vi->idev->keybit, KEY_CNT);
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_REL,
> > > > + vi->idev->relbit, REL_CNT);
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_ABS,
> > > > + vi->idev->absbit, ABS_CNT);
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_MSC,
> > > > + vi->idev->mscbit, MSC_CNT);
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_SW,
> > > > + vi->idev->swbit, SW_CNT);
> > > > +
> > > > + /* kernel -> device */
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_LED,
> > > > + vi->idev->ledbit, LED_CNT);
> > > > + virtinput_cfg_bits(vi, VIRTIO_INPUT_CFG_EV_BITS, EV_SND,
> > > > + vi->idev->sndbit, SND_CNT);
> > > > +
> > > > + if (test_bit(EV_ABS, vi->idev->evbit)) {
> > > > + for (abs = 0; abs < ABS_CNT; abs++) {
> > > > + if (!test_bit(abs, vi->idev->absbit))
> > > > + continue;
> > > > + virtinput_cfg_abs(vi, abs);
> > > > + }
> > > > + }
> > > > + virtio_device_ready(vdev);
> > > > +
> > > At this point you can already get interrupts.
> > > This will cause events to be forwarded.
> > > I'm guessing this is ok since you called
> > > input_allocate_device, but worth checking,
> > > and maybe adding a comment.
> >
> > Yes, it is OK to send events though yet unregistered input device, as
> > long as it was allocated with input_allocate_device().
> >
> > >
> > > > + err = input_register_device(vi->idev);
> > > > + if (err)
> > > > + goto err_input_register;
> > > > +
> > > > + return 0;
> > > > +
> > > > +err_input_register:
> > >
> > > > + input_free_device(vi->idev);
> > >
> > > At this point you can already get interrupts
> > > since you called virtio_device_ready, and
> > > getting events from a freed device likely won't
> > > DTRT.
> >
> > Right. I guess you want to mark the virtio device ready only after
> > registering input device.
>
> No that's broken since you can get events after this
> point, and you won't be able to forward them.

Who cares? What makes these events needed compared to ones sent 1 ms
earlier before we had input device registered?

But I guess if you can call virtio_device_ready/virtio_device_broken
several times then the best option is putting them into input_dev->open
and input_dev->close callbacks.

Thanks.

--
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/