Re: [PATCH 2/2] spi/rockchip: Add device tree property to configure Rx Sample Delay

[Doug Anderson]

Julius,

On Thu, Mar 26, 2015 at 4:30 PM, Julius Werner <jwerner@xxxxxxxxxxxx> wrote:
> We have found that we can sometimes see read failures on boards with
> high-capacitance SPI lines. It seems that the controller samples the Rx
> data line too early, and its register interface has an "Rx Sample Delay"
> setting to fine-tune against this issue.
>
> This patch adds a new optional device tree entry that can configure this
> delay in terms of nanoseconds. The kernel will calculate the
> best-fitting amount of parent clock ticks to program the controller with
> based on that.
>
> Signed-off-by: Julius Werner <jwerner@xxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/spi/spi-rockchip.txt        |  4 ++++
>  drivers/spi/spi-rockchip.c                          | 21 +++++++++++++++++++++
>  2 files changed, 25 insertions(+)

Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/