[PATCH 1/2] phy: dt-binding: document Conexant Digicolor USB PHY

[Baruch Siach]

Add a device tree binding documentation to the USB PHY hardware block on the
Conexant CX92755 SoC. The CX92755 is one of the Digicolor SoCs series. Other
SoCs in that series may share the same hardware block.

Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
---
 .../devicetree/bindings/phy/digicolor-usb-phy.txt         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/digicolor-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/digicolor-usb-phy.txt b/Documentation/devicetree/bindings/phy/digicolor-usb-phy.txt
new file mode 100644
index 000000000000..089f218c59c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/digicolor-usb-phy.txt
@@ -0,0 +1,15 @@
+Conexant Digicolor USB2 PHY
+
+Required properties:
+ - compatible: cnxt,cx92755-usbphy
+ - reg: offset and length of the PHY registers
+ - #phy-cells: must be 0
+Refer to phy-bindings.txt for the generic PHY binding properties
+
+Example:
+
+	usb_phy0: usb-phy@f0084000 {
+		compatible = "cnxt,cx92755-usbphy";
+		reg = <0xf0084000 0x100>;
+		#phy-cells = <0>;
+	};
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/