[PATCH 7/7] scsi: storvsc: Set the tablesize based on the information given by the host
From: K. Y. Srinivasan
Date: Fri Mar 27 2015 - 02:10:33 EST
Set the tablesize based on the information given by the host.
Signed-off-by: K. Y. Srinivasan <kys@xxxxxxxxxxxxx>
Reviewed-by: Long Li <longli@xxxxxxxxxxxxx>
Tested-by: Long Li <longli@xxxxxxxxxxxxx>
---
drivers/scsi/storvsc_drv.c | 89 +++++++++++++++++++++++++++++++------------
1 files changed, 64 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/storvsc_drv.c b/drivers/scsi/storvsc_drv.c
index 4156e29..d9dad90 100644
--- a/drivers/scsi/storvsc_drv.c
+++ b/drivers/scsi/storvsc_drv.c
@@ -351,7 +351,10 @@ struct storvsc_cmd_request {
/* Synchronize the request/response if needed */
struct completion wait_event;
- struct hv_multipage_buffer data_buffer;
+ struct vmbus_channel_packet_multipage_buffer mpb;
+ struct vmbus_packet_mpb_array *payload;
+ u32 payload_sz;
+
struct vstor_packet vstor_packet;
};
@@ -1103,6 +1106,8 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
struct Scsi_Host *host;
struct storvsc_device *stor_dev;
struct hv_device *dev = host_dev->dev;
+ u32 payload_sz = cmd_request->payload_sz;
+ void *payload = cmd_request->payload;
stor_dev = get_in_stor_device(dev);
host = stor_dev->host;
@@ -1132,10 +1137,14 @@ static void storvsc_command_completion(struct storvsc_cmd_request *cmd_request)
sense_hdr.ascq);
scsi_set_resid(scmnd,
- cmd_request->data_buffer.len -
+ cmd_request->payload->range.len -
vm_srb->data_transfer_length);
scmnd->scsi_done(scmnd);
+
+ if (payload_sz >
+ sizeof(struct vmbus_channel_packet_multipage_buffer))
+ kfree(payload);
}
static void storvsc_on_io_completion(struct hv_device *device,
@@ -1337,7 +1346,7 @@ static int storvsc_dev_remove(struct hv_device *device)
}
static int storvsc_do_io(struct hv_device *device,
- struct storvsc_cmd_request *request)
+ struct storvsc_cmd_request *request)
{
struct storvsc_device *stor_device;
struct vstor_packet *vstor_packet;
@@ -1369,13 +1378,14 @@ static int storvsc_do_io(struct hv_device *device,
vstor_packet->vm_srb.data_transfer_length =
- request->data_buffer.len;
+ request->payload->range.len;
vstor_packet->operation = VSTOR_OPERATION_EXECUTE_SRB;
- if (request->data_buffer.len) {
- ret = vmbus_sendpacket_multipagebuffer(outgoing_channel,
- &request->data_buffer,
+ if (request->payload->range.len) {
+
+ ret = vmbus_sendpacket_mpb_desc(outgoing_channel,
+ request->payload, request->payload_sz,
vstor_packet,
(sizeof(struct vstor_packet) -
vmscsi_size_delta),
@@ -1549,6 +1559,9 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
unsigned int sg_count = 0;
struct vmscsi_request *vm_srb;
struct scatterlist *cur_sgl;
+ struct vmbus_packet_mpb_array *payload;
+ u32 payload_sz;
+ u32 length;
if (vmstor_current_major <= VMSTOR_WIN8_MAJOR) {
/*
@@ -1602,48 +1615,71 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)
memcpy(vm_srb->cdb, scmnd->cmnd, vm_srb->cdb_length);
- cmd_request->data_buffer.len = scsi_bufflen(scmnd);
- if (scsi_sg_count(scmnd)) {
- sgl = (struct scatterlist *)scsi_sglist(scmnd);
- sg_count = scsi_sg_count(scmnd);
+ sgl = (struct scatterlist *)scsi_sglist(scmnd);
+ sg_count = scsi_sg_count(scmnd);
+ length = scsi_bufflen(scmnd);
+ payload = (struct vmbus_packet_mpb_array *)&cmd_request->mpb;
+ payload_sz = sizeof(cmd_request->mpb);
+
+ if (sg_count) {
/* check if we need to bounce the sgl */
if (do_bounce_buffer(sgl, scsi_sg_count(scmnd)) != -1) {
cmd_request->bounce_sgl =
- create_bounce_buffer(sgl, scsi_sg_count(scmnd),
- scsi_bufflen(scmnd),
+ create_bounce_buffer(sgl, sg_count,
+ length,
vm_srb->data_in);
if (!cmd_request->bounce_sgl)
return SCSI_MLQUEUE_HOST_BUSY;
cmd_request->bounce_sgl_count =
- ALIGN(scsi_bufflen(scmnd), PAGE_SIZE) >>
- PAGE_SHIFT;
+ ALIGN(length, PAGE_SIZE) >> PAGE_SHIFT;
if (vm_srb->data_in == WRITE_TYPE)
copy_to_bounce_buffer(sgl,
- cmd_request->bounce_sgl,
- scsi_sg_count(scmnd));
+ cmd_request->bounce_sgl, sg_count);
sgl = cmd_request->bounce_sgl;
sg_count = cmd_request->bounce_sgl_count;
}
- cmd_request->data_buffer.offset = sgl[0].offset;
+
+ if (sg_count > MAX_PAGE_BUFFER_COUNT) {
+
+ payload_sz = (sg_count * sizeof(void *) +
+ sizeof(struct vmbus_packet_mpb_array));
+ payload = kmalloc(payload_sz, GFP_ATOMIC);
+ if (!payload) {
+ if (cmd_request->bounce_sgl_count)
+ destroy_bounce_buffer(
+ cmd_request->bounce_sgl,
+ cmd_request->bounce_sgl_count);
+
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ }
+
+ payload->range.len = length;
+ payload->range.offset = sgl[0].offset;
+
cur_sgl = sgl;
for (i = 0; i < sg_count; i++) {
- cmd_request->data_buffer.pfn_array[i] =
+ payload->range.pfn_array[i] =
page_to_pfn(sg_page((cur_sgl)));
cur_sgl = sg_next(cur_sgl);
}
} else if (scsi_sglist(scmnd)) {
- cmd_request->data_buffer.offset =
+ payload->range.len = length;
+ payload->range.offset =
virt_to_phys(scsi_sglist(scmnd)) & (PAGE_SIZE-1);
- cmd_request->data_buffer.pfn_array[0] =
+ payload->range.pfn_array[0] =
virt_to_phys(scsi_sglist(scmnd)) >> PAGE_SHIFT;
}
+ cmd_request->payload = payload;
+ cmd_request->payload_sz = payload_sz;
+
/* Invokes the vsc to start an IO */
ret = storvsc_do_io(dev, cmd_request);
@@ -1672,10 +1708,7 @@ static struct scsi_host_template scsi_driver = {
.slave_configure = storvsc_device_configure,
.cmd_per_lun = 255,
.this_id = -1,
- /* no use setting to 0 since ll_blk_rw reset it to 1 */
- /* currently 32 */
- .sg_tablesize = MAX_MULTIPAGE_BUFFER_COUNT,
- .use_clustering = DISABLE_CLUSTERING,
+ .use_clustering = ENABLE_CLUSTERING,
/* Make sure we dont get a sg segment crosses a page boundary */
.dma_boundary = PAGE_SIZE-1,
.no_write_same = 1,
@@ -1812,6 +1845,12 @@ static int storvsc_probe(struct hv_device *device,
/* max cmd length */
host->max_cmd_len = STORVSC_MAX_CMD_LEN;
+ /*
+ * set the table size based on the info we got
+ * from the host.
+ */
+ host->sg_tablesize = (stor_device->max_transfer_bytes >> PAGE_SHIFT);
+
/* Register the HBA and start the scsi bus scan */
ret = scsi_add_host(host, &device->device);
if (ret != 0)
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/