[PATCH 5/9] libata: use status bit definitions in ata_dump_status()
From: Hannes Reinecke
Date: Fri Mar 27 2015 - 11:51:37 EST
Use the bit definitions for better readability.
Signed-off-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/ata/libata-scsi.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1f1cb69..f065cb1 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -799,26 +799,27 @@ static void ata_dump_status(unsigned id, struct ata_taskfile *tf)
if (stat & ATA_BUSY) {
printk("Busy }\n"); /* Data is not valid in this case */
} else {
- if (stat & 0x40) printk("DriveReady ");
- if (stat & 0x20) printk("DeviceFault ");
- if (stat & 0x10) printk("SeekComplete ");
- if (stat & 0x08) printk("DataRequest ");
- if (stat & 0x04) printk("CorrectedError ");
- if (stat & 0x02) printk("Sense ");
- if (stat & 0x01) printk("Error ");
+ if (stat & ATA_DRDY) printk("DriveReady ");
+ if (stat & ATA_DF) printk("DeviceFault ");
+ if (stat & ATA_DSC) printk("SeekComplete ");
+ if (stat & ATA_DRQ) printk("DataRequest ");
+ if (stat & ATA_CORR) printk("CorrectedError ");
+ if (stat & ATA_SENSE) printk("Sense ");
+ if (stat & ATA_ERR) printk("Error ");
printk("}\n");
if (err) {
printk(KERN_WARNING "ata%u: error=0x%02x { ", id, err);
- if (err & 0x04) printk("DriveStatusError ");
- if (err & 0x80) {
- if (err & 0x04) printk("BadCRC ");
+ if (err & ATA_ABORTED) printk("DriveStatusError ");
+ if (err & ATA_ICRC) {
+ if (err & ATA_ABORTED)
+ printk("BadCRC ");
else printk("Sector ");
}
- if (err & 0x40) printk("UncorrectableError ");
- if (err & 0x10) printk("SectorIdNotFound ");
- if (err & 0x02) printk("TrackZeroNotFound ");
- if (err & 0x01) printk("AddrMarkNotFound ");
+ if (err & ATA_UNC) printk("UncorrectableError ");
+ if (err & ATA_IDNF) printk("SectorIdNotFound ");
+ if (err & ATA_TRK0NF) printk("TrackZeroNotFound ");
+ if (err & ATA_AMNF) printk("AddrMarkNotFound ");
printk("}\n");
}
}
--
1.8.5.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/