Re: [PATCH] x86/asm/entry/64: better check for canonical address

[Andy Lutomirski]

On Sun, Mar 29, 2015 at 12:36 PM, Denys Vlasenko
<vda.linux@xxxxxxxxxxxxxx> wrote:
> On Sat, Mar 28, 2015 at 10:11 AM, Ingo Molnar <mingo@xxxxxxxxxx> wrote:
>>> >> $ ./timing_test64 iret
>>> >> 10000 loops in 0.00344s = 343.90 nsec/loop for iret
>>> >> 100000 loops in 0.01890s = 188.97 nsec/loop for iret
>>> >> 1000000 loops in 0.08228s = 82.28 nsec/loop for iret
>>> >> 10000000 loops in 0.77910s = 77.91 nsec/loop for iret
>>> >>
>>> >> This is the "same-ring interrupt return". ~230 cycles!  :(
>>> >
>>> > Ugh, that's really expensive! Why is that so? Same-ring irqs are
>>> > supposedly a lot simpler.
>>>
>>> Descriptor checks for restored CS and SS,
>>> checking canonical-ness of RIP,
>>> supporting "return to TSS" (flags.NT bit),
>>> "return to VM86" (flags.VM bit),
>>> complex logic around restoring RFLAGS
>>>   ("don't allow CPL3 to be able to disable interrupts...
>>>   ...unless their flags.IOPL is 3." Gasp)
>>> return to 16-bit code ("do not touch high 16 bits")
>>>
>>> All of this is a giant PITA to encode in microcode.
>>
>> I guess they could optimize it by adding a single "I am a modern OS
>> executing regular userspace" flag to the descriptor [or expressing the
>> same as a separate instruction], to avoid all that legacy crap that
>> won't trigger on like 99.999999% of systems ...
>
> Yes, that would be a useful addition. Interrupt servicing on x86
> takes a non-negligible hit because of IRET slowness.
>
> Specifically, a CPL0-only IRET_FAST insn which uses the same stack layout
> as IRET, but makes the following assumptions:
>
> * The restored SS and CS are 0-based, 4G-limit segments.
>    (as usual, in 64-bit mode limits are ignored).
> * CS is read/execute, SS is read/write.
> * The CPL to return to is equal to (CS & 3).
>
> This would mean that IRET_FAST would not need to read descriptors
> from GDT/LDT. It only needs to read values from stack.
>
> It would be capable of returning both to CPL0 and CPL3 - iow,
> usable for returning from interrupts both to userpace and kernelspace.
>
> * FLAGS.NT is ignored (as if it is 0). IOW, no task returns.
> * pt_regs->FLAGS.VM is not restored, but set to 0.
>    IOW, no vm86.
> * Extend this to other flags as well, if it makes return faster.
>    We can have a separate code which restores AC,DF,IF,TF,RF,IOPL
>    in the unlikely event they are "unusual". So it's okay
>    if IRET_FAST just sets them to 0 (1 for IF).
>
> The instruction would need a differentiator whether returned-to code
> is 64-bit or 32-bit.
> Then it probably can use the same approach SYSRET{O,L} uses:
> with REX.W, return is to 64-bit; without it, return is to 32-bit.
>
> Interrupt return then can check pt_regs->cs and use
> IRETL_FAST if it is USER32_CS; use IRETQ_FAST if it is USER_CS
> or KERNEL_CS; otherwise, fall back to slow but "universal" IRETQ.
>
> Do we have contacts at Intel to petition for this? :D

Some of us do and have petitioned :)

--Andy
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/