Re: [RFC PATCH v3 2/2] clk: exynos5420: Make sure MDMA0 clock is enabled during suspend

[Javier Martinez Canillas]

Hello Tomasz,

Thanks a lot for your feedback.

On 03/30/2015 06:07 PM, Tomasz Figa wrote:
> Hi Javier,
> 
> Please see my comments inline.
> 
> 2015-03-31 0:53 GMT+09:00 Javier Martinez Canillas
> <javier.martinez@xxxxxxxxxxxxxxx>:
> [snip]
>> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
>> index 07d666cc6a29..2d39b629144a 100644
>> --- a/drivers/clk/samsung/clk-exynos5420.c
>> +++ b/drivers/clk/samsung/clk-exynos5420.c
>> @@ -151,6 +151,7 @@ enum exynos5x_plls {
>>
>>  static void __iomem *reg_base;
>>  static enum exynos5x_soc exynos5x_soc;
>> +struct samsung_clk_provider *ctx;
> 
> static
>

Ok.
 
>>
>>  #ifdef CONFIG_PM_SLEEP
>>  static struct samsung_clk_reg_dump *exynos5x_save;
>> @@ -275,8 +276,18 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
>>         { .offset = GATE_IP_PERIC,              .value = 0xffffffff, },
>>  };
>>
>> +/*
>> + * list of clocks that have to be kept enabled during suspend/resume cycle.
>> + */
>> +static unsigned int exynos5x_clk_suspend[] = {
> 
> static const
>

Ok.
 
>> +       CLK_MDMA0,
>> +};
>> +
>>  static int exynos5420_clk_suspend(void)
>>  {
>> +       int i;
>> +       struct clk *clk;
>> +
>>         samsung_clk_save(reg_base, exynos5x_save,
>>                                 ARRAY_SIZE(exynos5x_clk_regs));
>>
>> @@ -287,11 +298,24 @@ static int exynos5420_clk_suspend(void)
>>         samsung_clk_restore(reg_base, exynos5420_set_clksrc,
>>                                 ARRAY_SIZE(exynos5420_set_clksrc));
>>
>> +       for (i = 0; i < ARRAY_SIZE(exynos5x_clk_suspend); i++) {
>> +               clk = samsung_clk_lookup(ctx, exynos5x_clk_suspend[i]);
> 
> If look-up speed is important here, maybe all the relevant clocks
> could be looked up once at initialization time and just prepared and
> enabled here?
>

Yes, I'll do that indeed.

In fact, I was wondering if we should let this clock be disabled at
all. I noticed that the rockchip clk drivers do something similar
and prepare / enable a list of clocks at init time [0,1].

Unfortunately I don't fully understand why this clock needs to be
enabled. It would be good if someone at Samsung can explain in
more detail what the real problem really is.
 
> Best regards,
> Tomasz
>

Best regards,
Javier

[0]: http://lxr.free-electrons.com/source/drivers/clk/rockchip/clk.c#L320
[1]: http://lxr.free-electrons.com/source/drivers/clk/rockchip/clk-rk3288.c#L874
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/