[PATCH v2] Input - mt: Fix input_mt_get_slot_by_key
From: Benjamin Tissoires
Date: Mon Mar 30 2015 - 14:54:33 EST
The case occurred recently with a touchscreen using twice a slot during a
single EV_SYN event:
E: 0.288415 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0
E: 0.296207 0003 0039 -001 # EV_ABS / ABS_MT_TRACKING_ID -1
E: 0.296207 0003 002f 0001 # EV_ABS / ABS_MT_SLOT 1
E: 0.296207 0003 0035 0908 # EV_ABS / ABS_MT_POSITION_X 908
E: 0.296207 0003 0036 1062 # EV_ABS / ABS_MT_POSITION_Y 1062
E: 0.296207 0003 002f 0000 # EV_ABS / ABS_MT_SLOT 0
E: 0.296207 0003 0039 8787 # EV_ABS / ABS_MT_TRACKING_ID 8787
E: 0.296207 0003 0035 1566 # EV_ABS / ABS_MT_POSITION_X 1566
E: 0.296207 0003 0036 0861 # EV_ABS / ABS_MT_POSITION_Y 861
E: 0.296207 0003 0000 0908 # EV_ABS / ABS_X 908
E: 0.296207 0003 0001 1062 # EV_ABS / ABS_Y 1062
E: 0.296207 0000 0000 0000 # ------------ SYN_REPORT (0) ----------
This occurred because while having already slots 0 and 1 assigned, the
touchscreen sent:
0.293377 Tip Switch: 0 | Contact Id: 0 | X: 539 | Y: 1960 | Contact Count: 3
0.294783 Tip Switch: 1 | Contact Id: 1 | X: 908 | Y: 1062 | Contact Count: 0
0.296187 Tip Switch: 1 | Contact Id: 2 | X: 1566 | Y: 861 | Contact Count: 0
Slot 0 is released correclty, but when we look for Contact ID 2, the slot
0 is then picked up again because it is marked as inactive (trackingID < 0).
This is wrong, and we should not reuse a slot in the same frame.
The test should also check for input_mt_is_used().
In addition, we need to initialize mt->frame to an other value than 0.
With mt->frame being 0, all slots are tags as currently used, and so
input_mt_get_slot_by_key() would return -1 for all requests.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=88903
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@xxxxxxxxxx>
---
Changes in v2:
- add note in input_mt_get_slot_by_key that input_mt_sync_frame() is required
Hi Dmitry, Henrik, Jiri,
With https://git.kernel.org/cgit/linux/kernel/git/jikos/hid.git/commit/?h=for-4.1/wacom&id=9a1c001298fd567c0f0776ab54ab9965eeb9019f
in Jiri's tree, scheduled for 4.1, this patch should not break any existing
driver. I'd like us to stage it somewhere so that it doesn't get forgotten.
Henrik's previous concerns were that input_mt_sync_frame() may not be called
by a driver using input_mt_get_slot_by_key(), and now, no driver should be in
this case.
Cheers,
Benjamin
drivers/input/input-mt.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c
index cb150a1..34feb3e 100644
--- a/drivers/input/input-mt.c
+++ b/drivers/input/input-mt.c
@@ -88,10 +88,13 @@ int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots,
goto err_mem;
}
- /* Mark slots as 'unused' */
+ /* Mark slots as 'inactive' */
for (i = 0; i < num_slots; i++)
input_mt_set_value(&mt->slots[i], ABS_MT_TRACKING_ID, -1);
+ /* Mark slots as 'unused' */
+ mt->frame = 1;
+
dev->mt = mt;
return 0;
err_mem:
@@ -439,6 +442,8 @@ EXPORT_SYMBOL(input_mt_assign_slots);
* set the key on the first unused slot and return.
*
* If no available slot can be found, -1 is returned.
+ * Note that for this function to work properly, input_mt_sync_frame() has
+ * to be called at each frame.
*/
int input_mt_get_slot_by_key(struct input_dev *dev, int key)
{
@@ -453,7 +458,7 @@ int input_mt_get_slot_by_key(struct input_dev *dev, int key)
return s - mt->slots;
for (s = mt->slots; s != mt->slots + mt->num_slots; s++)
- if (!input_mt_is_active(s)) {
+ if (!input_mt_is_active(s) && !input_mt_is_used(mt, s)) {
s->key = key;
return s - mt->slots;
}
--
2.3.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/