Re: [PATCH 2/2] phy: driver for Conexant Digicolor internal USB PHY

[Baruch Siach]

Hi Marek,

On Sat, Mar 28, 2015 at 04:33:02PM +0100, Marek Vasut wrote:
> On Friday, March 27, 2015 at 05:36:29 AM, Baruch Siach wrote:
> > Add a driver for the USB PHY on the Conexant CX92755 SoC, from the
> > Digicolor series of SoCs. The PHY is connected to the on-chip chipidea
> > usb2 host.
> > 
> > The hardware is somewhat similar to the phy-mxs-usb.c usb_phy, but it is
> > different enough to merit its own driver. Also, this driver uses the
> > generic phy infrastructure.
> 
> the register set looks very similar to MXS one indeed. How is it different 
> please ?

Almost of the bits that are defined in the MXS USBPHY_CTRL register are not 
defined in the Digicolor one. Some have different meaning, and some are 
reserved. OTOH, the Digicolor USBPHY_CTRL register uses all bits in the 1-13 
range. Also, the Digicolor phy does not have anatop registers.

> The driver looks OK.

Thanks.

BTW, do you know why the phy-mxs-usb driver calls its init from 
postcore_initcall? Is there a special need to register the driver so early?

baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch@xxxxxxxxxx - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/