[PATCH v3 4/7] clk: socfpga: switch to clk_div_mask()

From: Andy Shevchenko
Date: Tue Mar 31 2015 - 13:24:30 EST


Convert the code to use clk_div_mask() helper instead of div_mask() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
drivers/clk/socfpga/clk-gate.c | 2 +-
drivers/clk/socfpga/clk-periph.c | 2 +-
drivers/clk/socfpga/clk.h | 1 -
3 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
index dd3a78c..684d3bd 100644
--- a/drivers/clk/socfpga/clk-gate.c
+++ b/drivers/clk/socfpga/clk-gate.c
@@ -110,7 +110,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
div = socfpgaclk->fixed_div;
else if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- val &= div_mask(socfpgaclk->width);
+ val &= clk_div_mask(socfpgaclk->width);
/* Check for GPIO_DB_CLK by its offset */
if ((int) socfpgaclk->div_reg & SOCFPGA_GPIO_DB_CLK_OFFSET)
div = val + 1;
diff --git a/drivers/clk/socfpga/clk-periph.c b/drivers/clk/socfpga/clk-periph.c
index 46531c3..241cbc4 100644
--- a/drivers/clk/socfpga/clk-periph.c
+++ b/drivers/clk/socfpga/clk-periph.c
@@ -36,7 +36,7 @@ static unsigned long clk_periclk_recalc_rate(struct clk_hw *hwclk,
} else {
if (socfpgaclk->div_reg) {
val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift;
- val &= div_mask(socfpgaclk->width);
+ val &= clk_div_mask(socfpgaclk->width);
parent_rate /= (val + 1);
}
div = ((readl(socfpgaclk->hw.reg) & 0x1ff) + 1);
diff --git a/drivers/clk/socfpga/clk.h b/drivers/clk/socfpga/clk.h
index d291f60..5278156 100644
--- a/drivers/clk/socfpga/clk.h
+++ b/drivers/clk/socfpga/clk.h
@@ -27,7 +27,6 @@
#define CLKMGR_PERPLL_SRC 0xAC

#define SOCFPGA_MAX_PARENTS 3
-#define div_mask(width) ((1 << (width)) - 1)

extern void __iomem *clk_mgr_base_addr;

--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/