Re: [RFC PATCH v3 1/2] clk: samsung: Add a clock lookup function
From: Michael Turquette
Date: Tue Mar 31 2015 - 21:30:40 EST
Quoting Javier Martinez Canillas (2015-03-31 01:59:39)
> +Tomeu who I forgot to add to the cc list.
>
> Hello Mike,
>
> Thanks a lot for your feedback.
>
> On 03/31/2015 03:40 AM, Michael Turquette wrote:
> >>
> >> I don't performance is a big issue here. I just thought that since the
> >> lookup table is already filled by the driver and the lookup function
> >> is one line, we could use that instead to get the performance benefit.
> >>
> >> But I don't mind to drop this patch and use the generic lookup function
> >> from the CCF API if that is preferred.
> >
> > Hello,
> >
> > I am not a fan of __clk_lookup and I don't like to see it used more and
> > more outside of drivers/clk/clk.c. You mentioned that performance wasn't
> > really the problem here. The real method for a driver to get a clock is
> > with clk_get(). Any reason to not use that?
> >
>
> I can certainly use clk_get() but I thought that the clk consumer API was
> not supposed to be used from within clock drivers. That's why I mentioned
> __clk_lookup() as a possibility since that is part of the provider API.
I would like to remove __clk_lookup some day, so the fewer users now the
better. Additionally, now that we have unique struct clk pointers from
clk_get it makes a lot of sense for clk_register to stop returning
pointers to a struct clk. Hopefully we can get around to that soon.
These two points above are enough reason for the clock provider to use
clk_get.
>
> Below is a RFC patch that uses clk_get() [0]. That needs another patch
> which was part of a previous RFC and adds an alias for the mdma0 clock:
>
> https://lkml.org/lkml/2015/3/27/769
>
> If you think that is the correct approach then I can post it as a patch.
>
> It would be great if you can also provide some feedback about the other
> patch in the first RFC that instead of enabling and disabling the mdma0
> clock in driver, does it in the exynos5420 platform PM callbacks:
>
> https://lkml.org/lkml/2015/3/27/770
This seems like a big hack to me.
>
> I was asked to do it in the exynos5420 clk driver instead but maybe you
> have a different opinion on that.
>
> Best regards,
> Javier
>
> [0]:
> From c118df83da8cac65cc218ae9443622592222f5d0 Mon Sep 17 00:00:00 2001
> From: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> Date: Mon, 30 Mar 2015 17:11:40 +0200
> Subject: [RFC] clk: exynos5420: Make sure MDMA0 clock is enabled during
> suspend
>
> Commit ae43b3289186 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power
> Management support v12") added pm support for the pl330 dma driver but
> it makes the clock for the Exynos5420 MDMA0 DMA controller to be gated
> during suspend and this clock needs to remain enabled in order to make
> the system resume from a system suspend state.
>
> To make sure that the clock is enabled during suspend, enable it prior
> to entering a suspend state and disable it once the system has resumed.
I'd like to understand the issue a bit further. Isn't the correct
solution that the clk's prepare/unprepare and enable/disable callbacks
should support the CG_STATUS requirement?
Regards,
Mike
>
> Thanks to Abhilash Kesavan for figuring out that this was the issue.
>
> Fixes: ae43b32 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> ---
> drivers/clk/samsung/clk-exynos5420.c | 44 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 44 insertions(+)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 8b49e8b3b548..02029cf9fcb8 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -155,6 +155,7 @@ static enum exynos5x_soc exynos5x_soc;
> #ifdef CONFIG_PM_SLEEP
> static struct samsung_clk_reg_dump *exynos5x_save;
> static struct samsung_clk_reg_dump *exynos5800_save;
> +static struct clk **exynos5x_clks;
>
> /*
> * list of controller registers to be saved and restored during a
> @@ -275,8 +276,17 @@ static const struct samsung_clk_reg_dump exynos5420_set_clksrc[] = {
> { .offset = GATE_IP_PERIC, .value = 0xffffffff, },
> };
>
> +/*
> + * list of clocks that have to be kept enabled during suspend/resume cycle.
> + */
> +static const char *exynos5x_clk_pm[] __initdata = {
> + "mdma0",
> +};
> +
> static int exynos5420_clk_suspend(void)
> {
> + int i;
> +
> samsung_clk_save(reg_base, exynos5x_save,
> ARRAY_SIZE(exynos5x_clk_regs));
>
> @@ -287,11 +297,19 @@ static int exynos5420_clk_suspend(void)
> samsung_clk_restore(reg_base, exynos5420_set_clksrc,
> ARRAY_SIZE(exynos5420_set_clksrc));
>
> + for (i = 0; i < ARRAY_SIZE(exynos5x_clk_pm); i++)
> + clk_prepare_enable(exynos5x_clks[i]);
> +
> return 0;
> }
>
> static void exynos5420_clk_resume(void)
> {
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(exynos5x_clk_pm); i++)
> + clk_disable_unprepare(exynos5x_clks[i]);
> +
> samsung_clk_restore(reg_base, exynos5x_save,
> ARRAY_SIZE(exynos5x_clk_regs));
>
> @@ -307,6 +325,9 @@ static struct syscore_ops exynos5420_clk_syscore_ops = {
>
> static void exynos5420_clk_sleep_init(void)
> {
> + int i;
> + int clk_len = ARRAY_SIZE(exynos5x_clk_pm);
> +
> exynos5x_save = samsung_clk_alloc_reg_dump(exynos5x_clk_regs,
> ARRAY_SIZE(exynos5x_clk_regs));
> if (!exynos5x_save) {
> @@ -323,8 +344,31 @@ static void exynos5420_clk_sleep_init(void)
> goto err_soc;
> }
>
> + exynos5x_clks = kzalloc(sizeof(struct clk *) * clk_len, GFP_KERNEL);
> + if (!exynos5x_clks)
> + goto err_clks;
> +
> + for (i = 0; i < clk_len; i++) {
> + exynos5x_clks[i] = clk_get(NULL, exynos5x_clk_pm[i]);
> + if (IS_ERR(exynos5x_clks[i])) {
> + pr_warn("Failed to get %s clk (%ld)\n",
> + exynos5x_clk_pm[i], PTR_ERR(exynos5x_clks[i]));
> +
> + while (i--)
> + clk_put(exynos5x_clks[i]);
> +
> + goto err_clkget;
> + }
> + }
> +
> register_syscore_ops(&exynos5420_clk_syscore_ops);
> return;
> +err_clkget:
> + kfree(exynos5x_clks);
> +err_clks:
> + kfree(exynos5800_save);
> + pr_warn("%s: failed to allocate suspend clocks, no sleep support!\n",
> + __func__);
> err_soc:
> kfree(exynos5x_save);
> pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
> --
> 2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/