[PATCH v2 4/5] regulator: qcom: Refactor of-parsing code
From: Bjorn Andersson
Date: Wed Apr 01 2015 - 18:56:10 EST
Refactor out all custom property parsing code from the probe function
into a function suitable for regulator_desc->of_parse_cb usage.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
---
drivers/regulator/qcom_rpm-regulator.c | 141 +++++++++++++++++++--------------
1 file changed, 81 insertions(+), 60 deletions(-)
diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c
index ddca8cb..bd8360c 100644
--- a/drivers/regulator/qcom_rpm-regulator.c
+++ b/drivers/regulator/qcom_rpm-regulator.c
@@ -645,7 +645,9 @@ static int rpm_reg_set(struct qcom_rpm_reg *vreg,
return 0;
}
-static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
+static int rpm_reg_of_parse_freq(struct device *dev,
+ struct device_node *node,
+ struct qcom_rpm_reg *vreg)
{
static const int freq_table[] = {
19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000,
@@ -659,7 +661,7 @@ static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
int i;
key = "qcom,switch-mode-frequency";
- ret = of_property_read_u32(dev->of_node, key, &freq);
+ ret = of_property_read_u32(node, key, &freq);
if (ret) {
dev_err(dev, "regulator requires %s property\n", key);
return -EINVAL;
@@ -676,84 +678,40 @@ static int rpm_reg_of_parse_freq(struct device *dev, struct qcom_rpm_reg *vreg)
return -EINVAL;
}
-static int rpm_reg_probe(struct platform_device *pdev)
+static int rpm_reg_of_parse(struct device_node *node,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
{
- struct regulator_init_data *initdata;
- const struct qcom_rpm_reg *template;
- const struct of_device_id *match;
- struct regulator_config config = { };
- struct regulator_dev *rdev;
- struct qcom_rpm_reg *vreg;
+ struct qcom_rpm_reg *vreg = config->driver_data;
+ struct device *dev = config->dev;
const char *key;
u32 force_mode;
bool pwm;
u32 val;
int ret;
- match = of_match_device(rpm_of_match, &pdev->dev);
- template = match->data;
-
- vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
- if (!vreg) {
- dev_err(&pdev->dev, "failed to allocate vreg\n");
- return -ENOMEM;
- }
- memcpy(vreg, template, sizeof(*vreg));
- mutex_init(&vreg->lock);
- vreg->dev = &pdev->dev;
- vreg->desc.id = -1;
- vreg->desc.owner = THIS_MODULE;
- vreg->desc.type = REGULATOR_VOLTAGE;
- vreg->desc.name = pdev->dev.of_node->name;
- vreg->desc.supply_name = "vin";
-
- vreg->rpm = dev_get_drvdata(pdev->dev.parent);
- if (!vreg->rpm) {
- dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
- return -ENODEV;
- }
-
- initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
- &vreg->desc);
- if (!initdata)
- return -EINVAL;
-
- key = "reg";
- ret = of_property_read_u32(pdev->dev.of_node, key, &val);
- if (ret) {
- dev_err(&pdev->dev, "failed to read %s\n", key);
- return ret;
- }
- vreg->resource = val;
-
- if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
- (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
- dev_err(&pdev->dev, "no voltage specified for regulator\n");
- return -EINVAL;
- }
-
key = "bias-pull-down";
- if (of_property_read_bool(pdev->dev.of_node, key)) {
+ if (of_property_read_bool(node, key)) {
ret = rpm_reg_set(vreg, &vreg->parts->pd, 1);
if (ret) {
- dev_err(&pdev->dev, "%s is invalid", key);
+ dev_err(dev, "%s is invalid", key);
return ret;
}
}
if (vreg->parts->freq.mask) {
- ret = rpm_reg_of_parse_freq(&pdev->dev, vreg);
+ ret = rpm_reg_of_parse_freq(dev, node, vreg);
if (ret < 0)
return ret;
}
if (vreg->parts->pm.mask) {
key = "qcom,power-mode-hysteretic";
- pwm = !of_property_read_bool(pdev->dev.of_node, key);
+ pwm = !of_property_read_bool(node, key);
ret = rpm_reg_set(vreg, &vreg->parts->pm, pwm);
if (ret) {
- dev_err(&pdev->dev, "failed to set power mode\n");
+ dev_err(dev, "failed to set power mode\n");
return ret;
}
}
@@ -762,11 +720,11 @@ static int rpm_reg_probe(struct platform_device *pdev)
force_mode = -1;
key = "qcom,force-mode";
- ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ ret = of_property_read_u32(node, key, &val);
if (ret == -EINVAL) {
val = QCOM_RPM_FORCE_MODE_NONE;
} else if (ret < 0) {
- dev_err(&pdev->dev, "failed to read %s\n", key);
+ dev_err(dev, "failed to read %s\n", key);
return ret;
}
@@ -801,21 +759,84 @@ static int rpm_reg_probe(struct platform_device *pdev)
}
if (force_mode == -1) {
- dev_err(&pdev->dev, "invalid force mode\n");
+ dev_err(dev, "invalid force mode\n");
return -EINVAL;
}
ret = rpm_reg_set(vreg, &vreg->parts->fm, force_mode);
if (ret) {
- dev_err(&pdev->dev, "failed to set force mode\n");
+ dev_err(dev, "failed to set force mode\n");
return ret;
}
}
+ return 0;
+}
+
+static int rpm_reg_probe(struct platform_device *pdev)
+{
+ struct regulator_init_data *initdata;
+ const struct qcom_rpm_reg *template;
+ const struct of_device_id *match;
+ struct regulator_config config = { };
+ struct regulator_dev *rdev;
+ struct qcom_rpm_reg *vreg;
+ const char *key;
+ u32 val;
+ int ret;
+
+ match = of_match_device(rpm_of_match, &pdev->dev);
+ template = match->data;
+
+ vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
+ if (!vreg) {
+ dev_err(&pdev->dev, "failed to allocate vreg\n");
+ return -ENOMEM;
+ }
+ memcpy(vreg, template, sizeof(*vreg));
+ mutex_init(&vreg->lock);
+ vreg->dev = &pdev->dev;
+ vreg->desc.id = -1;
+ vreg->desc.owner = THIS_MODULE;
+ vreg->desc.type = REGULATOR_VOLTAGE;
+ vreg->desc.name = pdev->dev.of_node->name;
+ vreg->desc.supply_name = "vin";
+
+ vreg->rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!vreg->rpm) {
+ dev_err(&pdev->dev, "unable to retrieve handle to rpm\n");
+ return -ENODEV;
+ }
+
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ &vreg->desc);
+ if (!initdata)
+ return -EINVAL;
+
+ key = "reg";
+ ret = of_property_read_u32(pdev->dev.of_node, key, &val);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to read %s\n", key);
+ return ret;
+ }
+ vreg->resource = val;
+
+ if ((vreg->parts->uV.mask || vreg->parts->mV.mask) &&
+ (!initdata->constraints.min_uV || !initdata->constraints.max_uV)) {
+ dev_err(&pdev->dev, "no voltage specified for regulator\n");
+ return -EINVAL;
+ }
+
+
config.dev = &pdev->dev;
config.init_data = initdata;
config.driver_data = vreg;
config.of_node = pdev->dev.of_node;
+
+ ret = rpm_reg_of_parse(pdev->dev.of_node, &vreg->desc, &config);
+ if (ret)
+ return ret;
+
rdev = devm_regulator_register(&pdev->dev, &vreg->desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "can't register regulator\n");
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/