[PATCH v2 0/4] ARM: berlin: ADC support

From: Antoine Tenart
Date: Fri Apr 03 2015 - 09:07:17 EST


The Berlin ADC provides 8 channels, with one connected to a temperature
sensor. The temperature sensor has its own registers and both the ADC
and the temperature sensor need to be configured when using it.

This series is based on the two Berlin controllers rework series:
- https://lkml.org/lkml/2015/3/6/511
- https://lkml.org/lkml/2015/3/6/535


Changes since v1:
- updated to use regmap_update_bits()
- fixed mixed berlin/berlin2 and some prefixes
- reworked channel definitions
- moved to IIO_CHAN_INFO_PROCESSED for the tsen
- fixed some typos
- cosmetic changes

Antoine Tenart (4):
iio: adc: add support for Berlin
Documentation: bindings: document the Berlin ADC driver
ARM: berlin: add an ADC node for the BG2Q
ARM: berlin: enable the ADC on the BG2Q DMP

.../devicetree/bindings/iio/adc/berlin2_adc.txt | 19 ++
arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 4 +
arch/arm/boot/dts/berlin2q.dtsi | 8 +
drivers/iio/adc/Kconfig | 7 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/berlin2-adc.c | 379 +++++++++++++++++++++
6 files changed, 418 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
create mode 100644 drivers/iio/adc/berlin2-adc.c


To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/