Re: [PATCH v5 09/15] dt-bindings: Document the STM32 USART bindings
From: Maxime Coquelin
Date: Tue Apr 07 2015 - 11:50:07 EST
2015-04-03 19:14 GMT+02:00 Rob Herring <robherring2@xxxxxxxxx>:
> On Fri, Apr 3, 2015 at 12:01 PM, Maxime Coquelin
> <mcoquelin.stm32@xxxxxxxxx> wrote:
>> This adds documentation of device tree bindings for the
>> STM32 USART
>> Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
>> .../devicetree/bindings/serial/st,stm32-usart.txt | 32 ++++++++++++++++++++++
>> 1 file changed, 32 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/serial/st,stm32-usart.txt
>> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
>> new file mode 100644
>> index 0000000..090a3a4
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt
>> @@ -0,0 +1,32 @@
>> +* STMicroelectronics STM32 USART
>> +Required properties:
>> +- compatible: Can be either "st,stm32-usart" or "st,stm32-uart" depending on
>> +whether the device supports synchronous mode.
>> +- reg: The address and length of the peripheral registers space
>> +- interrupts: The interrupt line of the USART instance
>> +- clocks: The input clock of the USART instance
>> +Optional properties:
>> +- pinctrl: The reference on the pins configuration
>> +- st,hw-flow-ctrl: bool flag to enable hardware flow control.
> We already have "auto-flow-control" for 8250. Does that work for you?
Yes it works, just that I didn't know about it.
I will change to "auto-flow-control" in next version.
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/