Re: [PATCH] [PATCH v3] mtd:spi-nor: Add Altera Quad SPI Driver
From: Viet Nga Dao
Date: Tue Apr 07 2015 - 21:29:44 EST
Hi Brian,
Can you help me to review this patch of mine?
Thanks,
Nga
On Mon, Mar 16, 2015 at 4:16 PM, <vndao@xxxxxxxxxx> wrote:
> From: VIET NGA DAO <vndao@xxxxxxxxxx>
>
> Altera Quad SPI Controller is a soft IP which enables access to Altera EPCQ and
> EPCS flash chips. This patch adds driver for these devices.
>
> Signed-off-by: VIET NGA DAO <vndao@xxxxxxxxxx>
>
> ---
> v3:
> - Change altera_epcq driver name to altera_quadspi for more generic name
> - Implement flash name searching in altera_quadspi.c instead of spi-nor
> - Edit the altra quadspi info table in spi-nor
> - Remove wait_til_ready in all read,write, erase, lock, unlock functions
> - Merge .h and .c into 1 file
>
> v2:
> - Change to spi_nor structure
> - Add lock and unlock functions for spi_nor
> - Simplify the altera_epcq_lock function
> - Replace reg by compatible in device tree
> ---
> .../devicetree/bindings/mtd/altera_quadspi.txt | 45 ++
> drivers/mtd/spi-nor/Kconfig | 8 +
> drivers/mtd/spi-nor/Makefile | 1 +
> drivers/mtd/spi-nor/altera_quadspi.c | 608 +++++++++++++++++++++
> drivers/mtd/spi-nor/spi-nor.c | 11 +
> 5 files changed, 673 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mtd/altera_quadspi.txt
> create mode 100644 drivers/mtd/spi-nor/altera_quadspi.c
>
> diff --git a/Documentation/devicetree/bindings/mtd/altera_quadspi.txt b/Documentation/devicetree/bindings/mtd/altera_quadspi.txt
> new file mode 100644
> index 0000000..f5bdd35
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mtd/altera_quadspi.txt
> @@ -0,0 +1,45 @@
> +* MTD Altera QUADSPI driver
> +
> +Required properties:
> +- compatible: Should be "altr,quadspi-1.0"
> +- reg: Address and length of the register set for the device. It contains
> + the information of registers in the same order as described by reg-names
> +- reg-names: Should contain the reg names
> + "csr_base": Should contain the register configuration base address
> + "data_base": Should contain the data base address
> +- is-epcs: boolean type.
> + If present, the device contains EPCS flashes.
> + Otherwise, it contains EPCQ flashes.
> +- #address-cells: Must be <1>.
> +- #size-cells: Must be <0>.
> +- flash device tree subnode, there must be a node with the following fields:
> + - compatible: Should contain the flash name
> + - #address-cells: please refer to /mtd/partition.txt
> + - #size-cells: please refer to /mtd/partition.txt
> + For partitions inside each flash, please refer to /mtd/partition.txt
> +
> +Example:
> +
> + quadspi_controller_0: quadspi@0x000000000 {
> + compatible = "altr,quadspi-1.0";
> + reg = <0x00000001 0x00000000 0x00000020>,
> + <0x00000000 0x00000000 0x02000000>;
> + reg-names = "csr_base", "data_base";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + flash0: epcq256@0 {
> + compatible = "epcq256-nonjedec";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + partition@0 {
> + /* 16 MB for raw data. */
> + label = "EPCQ Flash 0 raw data";
> + reg = <0x0 0x1000000>;
> + };
> + partition@1000000 {
> + /* 16 MB for jffs2 data. */
> + label = "EPCQ Flash 0 JFFS 2";
> + reg = <0x1000000 0x1000000>;
> + };
> + };
> + }; //end quadspi@0x000000000 (quadspi_controller_0)
> diff --git a/drivers/mtd/spi-nor/Kconfig b/drivers/mtd/spi-nor/Kconfig
> index 64a4f0e..b9eed6d 100644
> --- a/drivers/mtd/spi-nor/Kconfig
> +++ b/drivers/mtd/spi-nor/Kconfig
> @@ -28,4 +28,12 @@ config SPI_FSL_QUADSPI
> This enables support for the Quad SPI controller in master mode.
> We only connect the NOR to this controller now.
>
> +config SPI_ALTERA_QUADSPI
> + tristate "Support Altera EPCQ/EPCS Flash chips"
> + depends on OF
> + help
> + This enables access to Altera EPCQ/EPCS flash chips, used for data
> + storage. See the driver source for the current list,
> + or to add other chips.
> +
> endif # MTD_SPI_NOR
> diff --git a/drivers/mtd/spi-nor/Makefile b/drivers/mtd/spi-nor/Makefile
> index 6a7ce14..1a36a72 100644
> --- a/drivers/mtd/spi-nor/Makefile
> +++ b/drivers/mtd/spi-nor/Makefile
> @@ -1,2 +1,3 @@
> obj-$(CONFIG_MTD_SPI_NOR) += spi-nor.o
> obj-$(CONFIG_SPI_FSL_QUADSPI) += fsl-quadspi.o
> +obj-$(CONFIG_SPI_ALTERA_QUADSPI) += altera_quadspi.o
> diff --git a/drivers/mtd/spi-nor/altera_quadspi.c b/drivers/mtd/spi-nor/altera_quadspi.c
> new file mode 100644
> index 0000000..1d178d9
> --- /dev/null
> +++ b/drivers/mtd/spi-nor/altera_quadspi.c
> @@ -0,0 +1,608 @@
> +/*
> + * Copyright (C) 2014 Altera Corporation. All rights reserved
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/errno.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/jiffies.h>
> +#include <linux/kernel.h>
> +#include <linux/log2.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/mtd/mtd.h>
> +#include <linux/mtd/partitions.h>
> +#include <linux/mtd/spi-nor.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
> +#include <linux/sched.h>
> +
> +#define ALTERA_QUADSPI_RESOURCE_NAME "altera_quadspi"
> +
> +/* max possible slots for serial flash chip in the QUADSPI controller */
> +#define MAX_NUM_FLASH_CHIP 3
> +#define EPCS_OPCODE_ID 1
> +#define EPCQ_OPCODE_ID 2
> +#define WRITE_CHECK 1
> +#define ERASE_CHECK 0
> +
> +/* Define max times to check status register before we give up. */
> +#define QUADSPI_MAX_TIME_OUT (40 * HZ)
> +
> +/* defines for status register */
> +#define QUADSPI_SR_REG 0x0
> +#define QUADSPI_SR_WIP_MASK 0x00000001
> +#define QUADSPI_SR_WIP 0x1
> +#define QUADSPI_SR_WEL 0x2
> +#define QUADSPI_SR_BP0 0x4
> +#define QUADSPI_SR_BP1 0x8
> +#define QUADSPI_SR_BP2 0x10
> +#define QUADSPI_SR_BP3 0x40
> +#define QUADSPI_SR_TB 0x20
> +#define QUADSPI_SR_MASK 0x0000000F
> +
> +/* defines for device id register */
> +#define QUADSPI_SID_REG 0x4
> +#define QUADSPI_RDID_REG 0x8
> +#define QUADSPI_ID_MASK 0x000000FF
> +
> +/*
> + * QUADSPI_MEM_OP register offset
> + *
> + * The QUADSPI_MEM_OP register is used to do memory protect and erase operations
> + *
> + */
> +#define QUADSPI_MEM_OP_REG 0xC
> +
> +#define QUADSPI_MEM_OP_CMD_MASK 0x00000003
> +#define QUADSPI_MEM_OP_BULK_ERASE_CMD 0x00000001
> +#define QUADSPI_MEM_OP_SECTOR_ERASE_CMD 0x00000002
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_CMD 0x00000003
> +#define QUADSPI_MEM_OP_SECTOR_VALUE_MASK 0x0003FF00
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK 0x00001F00
> +#define QUADSPI_MEM_OP_SECTOR_PROTECT_SHIFT 8
> +/*
> + * QUADSPI_ISR register offset
> + *
> + * The QUADSPI_ISR register is used to determine whether an invalid write or
> + * erase operation trigerred an interrupt
> + *
> + */
> +#define QUADSPI_ISR_REG 0x10
> +
> +#define QUADSPI_ISR_ILLEGAL_ERASE_MASK 0x00000001
> +#define QUADSPI_ISR_ILLEGAL_WRITE_MASK 0x00000002
> +
> +/*
> + * QUADSPI_IMR register offset
> + *
> + * The QUADSPI_IMR register is used to mask the invalid erase or the invalid
> + * write interrupts.
> + *
> + */
> +#define QUADSPI_IMR_REG 0x14
> +#define QUADSPI_IMR_ILLEGAL_ERASE_MASK 0x00000001
> +
> +#define QUADSPI_IMR_ILLEGAL_WRITE_MASK 0x00000002
> +
> +#define QUADSPI_CHIP_SELECT_REG 0x18
> +#define QUADSPI_CHIP_SELECT_MASK 0x00000007
> +#define QUADSPI_CHIP_SELECT_0 0x00000001
> +#define QUADSPI_CHIP_SELECT_1 0x00000002
> +#define QUADSPI_CHIP_SELECT_2 0x00000004
> +
> +struct altera_quadspi_plat {
> + void __iomem *csr_base;
> + void __iomem *data_base;
> + bool is_epcs;
> + u32 num_flashes;
> + struct device_node *np[MAX_NUM_FLASH_CHIP];
> +};
> +
> +struct altera_quadspi {
> + struct clk *clk;
> + bool is_epcs;
> + void __iomem *csr_base;
> + void __iomem *data_base;
> + u32 num_flashes;
> + struct altera_quadspi_flash *flash[MAX_NUM_FLASH_CHIP];
> +};
> +
> +struct altera_quadspi_flash {
> + struct mtd_info mtd;
> + struct spi_nor nor;
> + void *priv;
> +};
> +
> +struct flash_device {
> + char *name;
> + u8 opcode_id;
> + u32 device_id;
> +};
> +
> +#define FLASH_ID(_n, _opcode_id, _id) \
> +{ \
> + .name = (_n), \
> + .opcode_id = (_opcode_id), \
> + .device_id = (_id), \
> +}
> +
> +static struct flash_device flash_devices[] = {
> + FLASH_ID("epcq16-nonjedec", 2, 0x15),
> + FLASH_ID("epcq32-nonjedec", 2, 0x16),
> + FLASH_ID("epcq64-nonjedec", 2, 0x17),
> + FLASH_ID("epcq128-nonjedec", 2, 0x18),
> + FLASH_ID("epcq256-nonjedec", 2, 0x19),
> + FLASH_ID("epcq512-nonjedec", 2, 0x20),
> +
> + FLASH_ID("epcs16-nonjedec", 1, 0x14),
> + FLASH_ID("epcs64-nonjedec", 1, 0x16),
> + FLASH_ID("epcs128-nonjedec", 1, 0x18),
> +};
> +
> +static int altera_quadspi_write_reg(struct spi_nor *nor, u8 opcode, u8 *val,
> + int len, int wr_en)
> +{
> + return 0;
> +}
> +
> +static int altera_quadspi_read_reg(struct spi_nor *nor, u8 opcode, u8 *val,
> + int len)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + u32 data = 0;
> +
> + switch (opcode) {
> + case SPINOR_OP_RDSR:
> + data = readl(dev->csr_base + QUADSPI_SR_REG);
> + *val = (u8)data & QUADSPI_SR_MASK;
> + break;
> + case SPINOR_OP_RDID:
> + /* opcode id */
> + if (dev->is_epcs)
> + data = readl(dev->csr_base + QUADSPI_SID_REG);
> + else
> + data = readl(dev->csr_base + QUADSPI_RDID_REG);
> +
> + *val = (u8)data & QUADSPI_ID_MASK; /* device id */
> + break;
> + default:
> + *val = 0;
> + break;
> + }
> + return 0;
> +}
> +
> +static int altera_quadspi_write_erase_check(struct spi_nor *nor,
> + bool write_erase)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + u32 val;
> + u32 mask;
> +
> + if (write_erase)
> + mask = QUADSPI_ISR_ILLEGAL_WRITE_MASK;
> + else
> + mask = QUADSPI_ISR_ILLEGAL_ERASE_MASK;
> +
> + val = readl(dev->csr_base + QUADSPI_ISR_REG);
> + if (val & mask) {
> + dev_err(nor->dev,
> + "write/erase failed, sector might be protected\n");
> + /* clear this status for next use */
> + writel(val, dev->csr_base + QUADSPI_ISR_REG);
> + return -EIO;
> + }
> + return 0;
> +}
> +
> +static int altera_quadspi_addr_to_sector(struct mtd_info *mtd, int offset)
> +{
> + if (mtd->erasesize_shift)
> + return offset >> mtd->erasesize_shift;
> + do_div(offset, mtd->erasesize);
> + return offset;
> +}
> +
> +static int altera_quadspi_erase(struct spi_nor *nor, loff_t offset)
> +{
> +
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + struct mtd_info *mtd = &flash->mtd;
> + u32 val;
> + int ret;
> + int sector_value;
> +
> + sector_value = altera_quadspi_addr_to_sector(mtd, offset);
> + /* sanity check that block_offset is a valid sector number */
> + if (sector_value < 0)
> + return -EINVAL;
> +
> + /* sector value should occupy bits 17:8 */
> + val = (sector_value << 8) & QUADSPI_MEM_OP_SECTOR_VALUE_MASK;
> +
> + /* sector erase commands occupies lower 2 bits */
> + val |= QUADSPI_MEM_OP_SECTOR_ERASE_CMD;
> +
> + /* write sector erase command to QUADSPI_MEM_OP register */
> + writel(val, dev->csr_base + QUADSPI_MEM_OP_REG);
> +
> + ret = altera_quadspi_write_erase_check(nor, ERASE_CHECK);
> + if (ret < 0) {
> + dev_err(nor->dev, "illegal erase\n");
> + return ret;
> + }
> + return 0;
> +}
> +
> +static int altera_quadspi_read(struct spi_nor *nor, loff_t from, size_t len,
> + size_t *retlen, u_char *buf)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> +
> + memcpy_fromio(buf, dev->data_base + from, len);
> + *retlen = len;
> +
> + return 0;
> +}
> +
> +static void altera_quadspi_write(struct spi_nor *nor, loff_t to, size_t len,
> + size_t *retlen, const u_char *buf)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + int ret = 0;
> +
> + memcpy_toio(dev->data_base + to, buf, len);
> + *retlen += len;
> +
> + /*
> + * check whether write triggered a illegal write interrupt
> + */
> +
> + ret = altera_quadspi_write_erase_check(nor, WRITE_CHECK);
> + if (ret < 0)
> + dev_err(nor->dev, "illegal write\n");
> +
> +
> +}
> +
> +static int altera_quadspi_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + struct mtd_info *mtd = &flash->mtd;
> + uint32_t offset = ofs;
> + u32 sector_start, sector_end;
> + u32 num_sectors;
> + u32 mem_op;
> + u32 sr_bp;
> + u32 sr_tb;
> +
> + sector_start = offset;
> + sector_end = altera_quadspi_addr_to_sector(mtd, offset + len);
> + num_sectors = mtd->size;
> + do_div(num_sectors, mtd->erasesize);
> +
> + dev_dbg(nor->dev, "%s: sector start is %u,sector end is %u\n",
> + __func__, sector_start, sector_end);
> +
> + if (sector_start >= num_sectors / 2) {
> + sr_bp = fls(num_sectors - 1 - sector_start) + 1;
> + sr_tb = 0;
> + } else if ((sector_end < num_sectors / 2) && ~dev->is_epcs) {
> + sr_bp = fls(sector_end) + 1;
> + sr_tb = 1;
> + } else {
> + sr_bp = 16;
> + sr_tb = 0;
> + }
> +
> + mem_op = (sr_tb << 12) | (sr_bp << 8);
> + mem_op &= QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
> + mem_op |= QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
> + writel(mem_op, dev->csr_base + QUADSPI_MEM_OP_REG);
> +
> + return 0;
> +}
> +
> +static int altera_quadspi_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + u32 mem_op;
> +
> + dev_dbg(nor->dev, "Unlock all protected area\n");
> + mem_op = 0;
> + mem_op &= QUADSPI_MEM_OP_SECTOR_PROTECT_VALUE_MASK;
> + mem_op |= QUADSPI_MEM_OP_SECTOR_PROTECT_CMD;
> + writel(mem_op, dev->csr_base + QUADSPI_MEM_OP_REG);
> +
> + return 0;
> +}
> +
> +static void altera_quadspi_chip_select(struct altera_quadspi *dev, u32 bank)
> +{
> + u32 val = 0;
> +
> + switch (bank) {
> + case 0:
> + val = QUADSPI_CHIP_SELECT_0;
> + break;
> + case 1:
> + val = QUADSPI_CHIP_SELECT_1;
> + break;
> + case 2:
> + val = QUADSPI_CHIP_SELECT_2;
> + break;
> + default:
> + return;
> + }
> + writel(val, dev->csr_base + QUADSPI_CHIP_SELECT_REG);
> +}
> +
> +
> +static int altera_quadspi_probe_config_dt(struct platform_device *pdev,
> + struct device_node *np,
> + struct altera_quadspi_plat *pdata)
> +{
> + struct device_node *pp = NULL;
> + struct resource *quadspi_res;
> + int i = 0;
> +
> + pdata->is_epcs = of_property_read_bool(np, "is-epcs");
> +
> + quadspi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "csr_base");
> + pdata->csr_base = devm_ioremap_resource(&pdev->dev, quadspi_res);
> + if (IS_ERR(pdata->csr_base)) {
> + dev_err(&pdev->dev, "%s: ERROR: failed to map csr base\n",
> + __func__);
> + return PTR_ERR(pdata->csr_base);
> + }
> +
> + quadspi_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> + "data_base");
> + pdata->data_base = devm_ioremap_resource(&pdev->dev, quadspi_res);
> + if (IS_ERR(pdata->data_base)) {
> + dev_err(&pdev->dev, "%s: ERROR: failed to map data base\n",
> + __func__);
> + return PTR_ERR(pdata->data_base);
> + }
> +
> + /* Fill structs for each subnode (flash device) */
> + for_each_available_child_of_node(np, pp) {
> + /* Read bank id from DT */
> + pdata->np[i] = pp;
> + i++;
> + }
> + pdata->num_flashes = i;
> + return 0;
> +}
> +
> +static const char *get_flash_name(struct spi_nor *nor)
> +{
> + struct altera_quadspi_flash *flash = nor->priv;
> + struct altera_quadspi *dev = flash->priv;
> + int index;
> + int ret;
> + u8 id = 0;
> + u8 opcode_id;
> +
> + opcode_id = dev->is_epcs ? EPCS_OPCODE_ID : EPCQ_OPCODE_ID;
> + ret = nor->read_reg(nor, SPINOR_OP_RDID, &id, 1);
> + if (ret)
> + return NULL;
> + for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
> + if (flash_devices[index].device_id == id &&
> + flash_devices[index].opcode_id == opcode_id)
> + return flash_devices[index].name;
> + }
> +
> + /* Memory chip is not listed and not supported */
> + return NULL;
> +}
> +
> +static int altera_quadspi_setup_banks(struct platform_device *pdev,
> + u32 bank, struct device_node *np)
> +{
> + struct altera_quadspi *dev = platform_get_drvdata(pdev);
> + struct mtd_part_parser_data ppdata = {};
> + struct altera_quadspi_flash *flash;
> + struct spi_nor *nor;
> + int ret = 0;
> + char modalias[40];
> + const char *flash_name;
> +
> + altera_quadspi_chip_select(dev, bank);
> +
> + if (bank > dev->num_flashes - 1)
> + return -EINVAL;
> +
> + flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_KERNEL);
> + if (!flash)
> + return -ENOMEM;
> +
> + dev->flash[bank] = flash;
> + nor = &flash->nor;
> + nor->mtd = &flash->mtd;
> + nor->dev = &pdev->dev;
> + nor->priv = flash;
> + flash->mtd.priv = nor;
> + flash->priv = dev;
> +
> + /* spi nor framework*/
> + nor->read_reg = altera_quadspi_read_reg;
> + nor->write_reg = altera_quadspi_write_reg;
> + nor->read = altera_quadspi_read;
> + nor->write = altera_quadspi_write;
> + nor->erase = altera_quadspi_erase;
> + nor->flash_lock = altera_quadspi_lock;
> + nor->flash_unlock = altera_quadspi_unlock;
> +
> + if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
> + return -EINVAL;
> +
> + flash_name = get_flash_name(nor);
> + if (flash_name == NULL)
> + return -EINVAL;
> +
> + if (strcmp(flash_name, modalias) != 0) {
> + dev_err(nor->dev,
> + "flash name %s mismatch with device tree %s\n",
> + flash_name, modalias);
> + return -EINVAL;
> + }
> + ret = spi_nor_scan(nor, flash_name, SPI_NOR_QUAD);
> + if (ret)
> + return ret;
> +
> + ppdata.of_node = np;
> +
> + return mtd_device_parse_register(&flash->mtd, NULL, &ppdata, NULL, 0);
> +}
> +
> +static int altera_quadspi_probe(struct platform_device *pdev)
> +{
> + struct device_node *np = pdev->dev.of_node;
> + struct altera_quadspi_plat *pdata = NULL;
> + struct altera_quadspi *dev;
> + int ret = 0;
> + int i;
> +
> + if (!np) {
> + ret = -ENODEV;
> + dev_err(&pdev->dev, "no device found\n");
> + goto err;
> + }
> +
> + pdata = devm_kzalloc(&pdev->dev,
> + sizeof(struct altera_quadspi_plat),
> + GFP_KERNEL);
> +
> + if (!pdata) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + ret = altera_quadspi_probe_config_dt(pdev, np, pdata);
> + if (ret) {
> + ret = -ENODEV;
> + dev_err(&pdev->dev, "probe fail\n");
> + goto err;
> + }
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev) {
> + ret = -ENOMEM;
> + goto err;
> + }
> +
> + dev->is_epcs = pdata->is_epcs;
> + dev->csr_base = pdata->csr_base;
> + dev->data_base = pdata->data_base;
> +
> + /* check number of flashes */
> + dev->num_flashes = pdata->num_flashes;
> + if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
> + dev_err(&pdev->dev, "exceeding max number of flashes\n");
> + dev->num_flashes = MAX_NUM_FLASH_CHIP;
> + }
> +
> + /* check clock */
> + dev->clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(dev->clk)) {
> + ret = PTR_ERR(dev->clk);
> + goto err;
> + }
> + ret = clk_prepare_enable(dev->clk);
> + if (ret)
> + goto err;
> +
> + platform_set_drvdata(pdev, dev);
> +
> + /* loop for each flash which is connected to quadspi */
> + for (i = 0; i < dev->num_flashes; i++) {
> + ret = altera_quadspi_setup_banks(pdev, i, pdata->np[i]);
> + if (ret) {
> + dev_err(&pdev->dev, "bank setup failed\n");
> + goto err_bank_setup;
> + }
> + }
> +
> + return 0;
> +
> +err_bank_setup:
> + clk_disable_unprepare(dev->clk);
> +err:
> + return ret;
> +}
> +
> +static int altera_quadspi_remove(struct platform_device *pdev)
> +{
> + struct altera_quadspi *dev;
> + struct altera_quadspi_flash *flash;
> + int ret, i;
> +
> + dev = platform_get_drvdata(pdev);
> +
> + /* clean up for all nor flash */
> + for (i = 0; i < dev->num_flashes; i++) {
> + flash = dev->flash[i];
> + if (!flash)
> + continue;
> +
> + /* clean up mtd stuff */
> + ret = mtd_device_unregister(&flash->mtd);
> + if (ret)
> + dev_err(&pdev->dev, "error removing mtd\n");
> + }
> +
> + clk_disable_unprepare(dev->clk);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id altera_quadspi_id_table[] = {
> + { .compatible = "altr,quadspi-1.0" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, altera_quadspi_id_table);
> +
> +static struct platform_driver altera_quadspi_driver = {
> + .driver = {
> + .name = ALTERA_QUADSPI_RESOURCE_NAME,
> + .bus = &platform_bus_type,
> + .of_match_table = altera_quadspi_id_table,
> + },
> + .probe = altera_quadspi_probe,
> + .remove = altera_quadspi_remove,
> +};
> +module_platform_driver(altera_quadspi_driver);
> +
> +MODULE_AUTHOR("Viet Nga Dao <vndao@xxxxxxxxxx>");
> +MODULE_DESCRIPTION("Altera QuadSPI Driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index 43bb552..ad0c274 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -683,6 +683,17 @@ static const struct spi_device_id spi_nor_ids[] = {
> { "cat25c09", CAT25_INFO( 128, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> { "cat25c17", CAT25_INFO( 256, 8, 32, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> { "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
> +
> + /* Altera EPCQ/EPCS Flashes */
> + { "epcq16-nonjedec", INFO(0, 0, 0x10000, 32, 0) },
> + { "epcq32-nonjedec", INFO(0, 0, 0x10000, 64, 0) },
> + { "epcq64-nonjedec", INFO(0, 0, 0x10000, 128, 0) },
> + { "epcq128-nonjedec", INFO(0, 0, 0x10000, 256, 0) },
> + { "epcq256-nonjedec", INFO(0, 0, 0x10000, 512, 0) },
> + { "epcq512-nonjedec", INFO(0, 0, 0x10000, 1024, 0) },
> + { "epcs16-nonjedec", INFO(0, 0, 0x10000, 32, 0) },
> + { "epcs64-nonjedec", INFO(0, 0, 0x10000, 128, 0) },
> + { "epcs128-nonjedec", INFO(0, 0, 0x40000, 256, 0) },
> { },
> };
>
> --
> 1.7.11.GIT
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/