Re: [alsa-devel] Audio Jack Out does not work

From: Takashi Iwai
Date: Thu Apr 09 2015 - 01:28:24 EST


At Thu, 9 Apr 2015 09:34:05 +0800,
Raymond Yau wrote:
>
> > > > > > Taylor Smock wrote:
> > > > > > >
> > > > > > > Yes; reverting the patch does fix the problem.
> > > > > >
> > > > > > What if you just adjust the new volume manually without
> > > > > > reverting the
> > > > > > patch? Run "alsamixer -c0" (or -c1, depending on the setup).
> > > > > > Once
> > > > > > after the setup, run "alsactl store" as root to save as the
> > > > > > system
> > > > > > default volume.
> > > > > >
> > > > > > The renamed volume should have been set in full volume as
> > > > > > default by
> > > > > > the driver, and this shouldn't matter whether PA is new or old.
> > > > > > If
> > > > > > the mixer adjustment isn't kept after relogin or reboot, it
> > > > > > means
> > > > > > that
> > > > > > some user-space stuff overrides it.
> > > > > >
> > > > > > In anyway, please give alsa-info.sh output before and after the
> > > > > > commit.
> > > > > >
> > > > > >
> > > > > > Takashi
> > > > > >
> > > > > > > On Wed, 2015-04-08 at 01:56 +0300, Dan Carpenter wrote:
> > > > > > > > So it's 03ad6a8c93b6df2 ('ALSA: hda - Fix "PCM" name being
> > > > > > > > used
> > > > > > > > on > one
> > > > > > > > DAC when there are two DACs') which causes the problem?
> > > > > > > > Have
> > > > > > > > you
> > > > > > > > tried
> > > > > > > > to just revert that patch?
> > > > > > > >
> > > > > > > > git show 03ad6a8c93b6df2d65c305b5b5f9474068b45bfb | patch -
> > > > > > > > p1 -R
> > > > > > > >
> > > > > > > > regards,
> > > > > > > > dan carpenter
> > > > > > > >
> > > > > > >
> > > > >
> > > > > I ran alsamixer -c0.
> > > > > Headphones did nothing.
> > > > > Speaker+L0 did change headphone volume.
> > > >
> > > > Please elaborate a bit what you're testing and what you expected.
> > > > When you change "Headphone" volume and mute, it did nothing for which
> > > > output? "Speaker+LO" changes which output and which not?
> > > >
> > > > You seem to have three outputs, one headphone jack on a laptop and
> > > > one
> > > > on a docking station, and there is a built-in speaker. Since your
> > > > codec has only two DACs, two of three must be tied.
> > > >
> > > > The bad thing is that BIOS pin configuration doesn't set the
> > > > headphone
> > > > pin with the associate number 0x0f but only set it to the dock
> > > > headphone. Thus the driver assumes that the dock jack is the right
> > > > headphone and handles the laptop headphone as a sub output.
> > > > The commit you spotted took this difference more severely, and now
> > > > you
> > > > see the unexpected mixer assignment.
> > > >
> > > > So, the right "fix" would be rather to correct the pin config.
> > > > For example, try the patch below.
> > > >
> > > > (BTW, what is the product of your laptop model? A more exact name
> > > > can
> > > > be filled in the quirk string.)
> > > >
> > > > > PCM also seemed to affect headphone volume.
> > > >
> > > > This is a mixer element added by alsa-lib softvol plugin, and it's
> > > > not
> > > > what the kernel manages.
> > > >
> > > > Judging from the description that this PCM volume affects, you are
> > > > playing without PulseAudio but dmix, I suppose?
> > > >
> > > >
> > > > Takashi
> > > >
> > > > diff --git a/sound/pci/hda/patch_realtek.c
> > > > b/sound/pci/hda/patch_realtek.c
> > > > index 7b5c93e0e78c..9d935e5c008a 100644
> > > > --- a/sound/pci/hda/patch_realtek.c
> > > > +++ b/sound/pci/hda/patch_realtek.c
> > > > @@ -4429,6 +4429,7 @@ enum {
> > > > ALC269_FIXUP_QUANTA_MUTE,
> > > > ALC269_FIXUP_LIFEBOOK,
> > > > ALC269_FIXUP_LIFEBOOK_EXTMIC,
> > > > + ALC269_FIXUP_FUJITSU_HP_PIN,
> > > > ALC269_FIXUP_AMIC,
> > > > ALC269_FIXUP_DMIC,
> > > > ALC269VB_FIXUP_AMIC,
> > > > @@ -4585,6 +4586,13 @@ static const struct hda_fixup alc269_fixups[]
> > > > = {
> > > > { }
> > > > },
> > > > },
> > > > + [ALC269_FIXUP_FUJITSU_HP_PIN] = {
> > > > + .type = HDA_FIXUP_PINS,
> > > > + .v.pins = (const struct hda_pintbl[]) {
> > > > + { 0x21, 0x0221102f }, /* HP out */
> > > > + { }
> > > > + },
> > > > + },
> >
>
> Do you mind explaining the logic of this pin fixup as driver also change
> max channels from 2 to 4 ?
>
> The parser put one headphone in the line_outs before your patch but type is
> still line
>
> autoconfig for ALC269VB: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
> speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
> hp_outs=1 (0x1a/0x0/0x0/0x0/0x0)
> mono: mono_out=0x0
> inputs:
> Internal Mic=0x12
> Mic=0x18
>
> the headphone and dock headphone was put in the hp_outsafter your patch
>
> autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
> speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> hp_outs=2 (0x1a/0x21/0x0/0x0/0x0)
> mono: mono_out=0x0
> inputs:
> Internal Mic=0x12
> Mic=0x18
>
>
> Do the driver need to distinguish between
>
> notebook with headphone and Dock headphone
> notebook with dual headphone jacks

The former is handled when the dock headphone is a kind of line-out.
Now we handle this laptop as the latter, which fits better in the case
of two DACs.


Takashi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/