Re: [PATCH v2 06/12] ARM: dts: apq8064: Add MDP support

[Srinivas Kandagatla]

On 10/04/15 18:04, Stephen Boyd wrote:
> On 04/10/15 05:34, Srinivas Kandagatla wrote:
> > @@ -250,6 +265,18 @@
> >   			};
> >   		};
> >
> > +		ext_3p3v: regulator-fixed@1 {
> > +			compatible = "regulator-fixed";
> > +			regulator-min-microvolt = <3300000>;
> > +			regulator-max-microvolt = <3300000>;
> > +			regulator-name = "ext_3p3v";
> > +			regulator-type = "voltage";
> > +			startup-delay-us = <0>;
> > +			gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
> > +			enable-active-high;
> > +			regulator-boot-on;
> > +		};
>
> This shouldn't be inside the SoC node because it doesn't have a reg
> property. It should be in a 'regulators' node that's in the root of the
> tree:

Is this new DT requirement/style? I have not noticed such a dt style in 
the past. I might have missed it. Any advantage of doing this way?
> 	regulators {
> 		compatible = "simple-bus";
>
> 		ext_3p3v: fixedregulator@0 {
> 			compatible = "regulator-fixed";
> 			...
> 		};
> 	};
I will move this to the suggested style in next version.
> > +
> >   		qcom,ssbi@500000 {
> >   			compatible = "qcom,ssbi";
> >   			reg = <0x00500000 0x1000>;
> > @@ -522,5 +549,82 @@
> >   			compatible = "qcom,tcsr-apq8064", "syscon";
> >   			reg = <0x1a400000 0x100>;
> >   		};
> > +
> > +		hdmi: qcom,hdmi-tx@4a00000 {
> > +			compatible = "qcom,hdmi-tx-8960";
> > +			reg-names = "core_physical";
> > +			reg = <0x04a00000 0x1000>;
> > +			interrupts = <GIC_SPI 79 IRQ_TYPE_NONE>;
> > +			clock-names =
> > +			    "core_clk",
> > +			    "master_iface_clk",
> > +			    "slave_iface_clk";
> > +			clocks =
> > +			    <&mmcc HDMI_APP_CLK>,
> > +			    <&mmcc HDMI_M_AHB_CLK>,
> > +			    <&mmcc HDMI_S_AHB_CLK>;
> > +			qcom,hdmi-tx-ddc-clk = <&tlmm_pinmux 70
> > +						GPIO_ACTIVE_HIGH>;
> > +			qcom,hdmi-tx-ddc-data = <&tlmm_pinmux 71
> > +						GPIO_ACTIVE_HIGH>;
> > +			qcom,hdmi-tx-hpd = <&tlmm_pinmux 72
> > +						GPIO_ACTIVE_HIGH>;
>
> This should be done via the *-gpios method. i.e. hdmi-tx-ddc-clk-gpios,
> hdmi-tx-ddc-data-gpios, etc.
Thanks for the inputs,

That's true, These are existing bindings, so I can't change it as part 
of this patch, However I will make another patch to fix this in both 
drivers and DT for good reasons. Just noticed that bindings are not 
consistent with the examples and the driver, which I guess is another issue.
> > +			core-vdda-supply = <&pm8921_hdmi_switch>;
> > +			hdmi-mux-supply = <&ext_3p3v>;
> > +			pinctrl-names = "default";
> > +			pinctrl-0 = <&hdmi_pinctrl>;
> > +		};
> > +
> > +		gpu: qcom,adreno-3xx@4300000 {
> > +			compatible = "qcom,adreno-3xx";
> > +			reg = <0x04300000 0x20000>;
> > +			reg-names = "kgsl_3d0_reg_memory";
> > +			interrupts = <GIC_SPI 80 IRQ_TYPE_NONE>;
> > +			interrupt-names = "kgsl_3d0_irq";
> > +			clock-names =
> > +			    "core_clk",
> > +			    "iface_clk",
> > +			    "mem_clk",
> > +			    "mem_iface_clk";
> > +			clocks =
> > +			    <&mmcc GFX3D_CLK>,
> > +			    <&mmcc GFX3D_AHB_CLK>,
> > +			    <&mmcc GFX3D_AXI_CLK>,
> > +			    <&mmcc MMSS_IMEM_AHB_CLK>;
> > +			qcom,chipid = <0x03020002>;
> > +			qcom,gpu-pwrlevels {
> > +				compatible = "qcom,gpu-pwrlevels";
> > +				qcom,gpu-pwrlevel@0 {
> > +					qcom,gpu-freq = <450000000>;
> > +				};
> > +				qcom,gpu-pwrlevel@1 {
> > +					qcom,gpu-freq = <27000000>;
> > +				};
> > +			};
>
> This should be an OPP.
Yes, that looks reasonable approch, But as I said before the driver and 
the bindings are still using this style, so I cant change this as part 
of this patch. I will create another patch to for better bindings with 
driver fixes too.

>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/