[PATCH v3 0/2] ARM: at91/dt: add support for at91-kizboxmini

[GaÃl PORTAY]

Hi,

Here are two patches to bring support for a new hardware based on SAM9G25 SoC.

The first one adds the PIN controller definition for PWM0.
The second defines the new board.

Changes since v1:
- drop useless comments
- move pwm0 pinctrl's node close to tcb0
- drop ek boards from compatible machine
- add at91sam9g25 board to compatible machine

Changes since v2:
- update to v4.0
- fix alphabetical order between gpio_keys and pwm_leds

Best regards,
GaÃl PORTAY (2):
  ARM: at91/dt: sam9x5: add pinctrl for pwm0
  ARM: at91/dt: add support for kizboxmini

 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/at91-kizboxmini.dts | 129 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/at91sam9x5.dtsi     |  46 ++++++++++++
 3 files changed, 176 insertions(+)
 create mode 100644 arch/arm/boot/dts/at91-kizboxmini.dts

-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/