[PATCH v2 12/17] iio: accel: mma9553: fix gpio bitnum init value

[Irina Tirdea]

Initial value of gpio bitnum is set to -1, but
the variable is declared as unsigned.

Use a positive invalid value for initial gpio
bitnum.

Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
Suggested-by: Hartmut Knaack <knaack.h@xxxxxx>
---
 drivers/iio/accel/mma9553.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/mma9553.c b/drivers/iio/accel/mma9553.c
index 9573147..5755977 100644
--- a/drivers/iio/accel/mma9553.c
+++ b/drivers/iio/accel/mma9553.c
@@ -78,6 +78,7 @@
 
 /* Bitnum used for GPIO configuration = bit number in high status byte */
 #define MMA9553_STATUS_TO_BITNUM(bit)	(ffs(bit) - 9)
+#define MMA9553_MAX_BITNUM		MMA9553_STATUS_TO_BITNUM(BIT(16))
 
 #define MMA9553_DEFAULT_SAMPLE_RATE	30	/* Hz */
 
@@ -404,8 +405,8 @@ static int mma9553_init(struct mma9553_data *data)
 	}
 
 
-	data->gpio_bitnum = -1;
 	/* Reset GPIO */
+	data->gpio_bitnum = MMA9553_MAX_BITNUM;
 	ret = mma9553_conf_gpio(data);
 	if (ret < 0)
 		return ret;
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/