[PATCH 2/6] mtd: diskonchip: don't call nand_scan_bbt() directly
From: Peter Pan 潘栋 (peterpandong)
Date: Wed Apr 15 2015 - 22:12:02 EST
The diskonchip driver almost uses the default nand_base hooks as-is,
except that it provides custom on-flash BBT descriptors and avoids using
factory-marked bad blockers.
So let's refactor the BBT initialization code into a private 'late_init'
hook which handles all the private details. Note the usage of
NAND_SKIP_BBTSCAN, which allows us to defer the BBT scan until we've
prepared everything.
Signed-off-by: Brian Norris <computersforpeace@xxxxxxxxx>
Signed-off-by: Peter Pan <peterpandong@xxxxxxxxxx>
---
drivers/mtd/nand/diskonchip.c | 27 ++++++++++++++++-----------
1 file changed, 16 insertions(+), 11 deletions(-)
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index f68a7bc..e580014 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -69,6 +69,9 @@ struct doc_priv {
int mh0_page;
int mh1_page;
struct mtd_info *nextdoc;
+
+ /* Handle the last stage of initialization (BBT scan, partitioning) */
+ int (*late_init)(struct mtd_info *mtd);
};
/* This is the syndrome computed by the HW ecc generator upon reading an empty
@@ -1294,10 +1297,10 @@ static int __init nftl_scan_bbt(struct mtd_info *mtd)
this->bbt_md = NULL;
}
- /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
- At least as nand_bbt.c is currently written. */
- if ((ret = nand_scan_bbt(mtd, NULL)))
+ ret = this->scan_bbt(mtd);
+ if (ret)
return ret;
+
mtd_device_register(mtd, NULL, 0);
if (!no_autopart)
mtd_device_register(mtd, parts, numparts);
@@ -1344,10 +1347,10 @@ static int __init inftl_scan_bbt(struct mtd_info *mtd)
this->bbt_md->pattern = "TBB_SYSM";
}
- /* It's safe to set bd=NULL below because NAND_BBT_CREATE is not set.
- At least as nand_bbt.c is currently written. */
- if ((ret = nand_scan_bbt(mtd, NULL)))
+ ret = this->scan_bbt(mtd);
+ if (ret)
return ret;
+
memset((char *)parts, 0, sizeof(parts));
numparts = inftl_partscan(mtd, parts);
/* At least for now, require the INFTL Media Header. We could probably
@@ -1369,7 +1372,7 @@ static inline int __init doc2000_init(struct mtd_info *mtd)
this->read_byte = doc2000_read_byte;
this->write_buf = doc2000_writebuf;
this->read_buf = doc2000_readbuf;
- this->scan_bbt = nftl_scan_bbt;
+ doc->late_init = nftl_scan_bbt;
doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO;
doc2000_count_chips(mtd);
@@ -1396,13 +1399,13 @@ static inline int __init doc2001_init(struct mtd_info *mtd)
can have multiple chips. */
doc2000_count_chips(mtd);
mtd->name = "DiskOnChip 2000 (INFTL Model)";
- this->scan_bbt = inftl_scan_bbt;
+ doc->late_init = inftl_scan_bbt;
return (4 * doc->chips_per_floor);
} else {
/* Bog-standard Millennium */
doc->chips_per_floor = 1;
mtd->name = "DiskOnChip Millennium";
- this->scan_bbt = nftl_scan_bbt;
+ doc->late_init = nftl_scan_bbt;
return 1;
}
}
@@ -1415,7 +1418,7 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd)
this->read_byte = doc2001plus_read_byte;
this->write_buf = doc2001plus_writebuf;
this->read_buf = doc2001plus_readbuf;
- this->scan_bbt = inftl_scan_bbt;
+ doc->late_init = inftl_scan_bbt;
this->cmd_ctrl = NULL;
this->select_chip = doc2001plus_select_chip;
this->cmdfunc = doc2001plus_command;
@@ -1591,6 +1594,8 @@ static int __init doc_probe(unsigned long physadr)
nand->ecc.bytes = 6;
nand->ecc.strength = 2;
nand->bbt_options = NAND_BBT_USE_FLASH;
+ /* Skip the automatic BBT scan so we can run it manually */
+ nand->options |= NAND_SKIP_BBTSCAN;
doc->physadr = physadr;
doc->virtadr = virtadr;
@@ -1608,7 +1613,7 @@ static int __init doc_probe(unsigned long physadr)
else
numchips = doc2001_init(mtd);
- if ((ret = nand_scan(mtd, numchips))) {
+ if ((ret = nand_scan(mtd, numchips)) || (ret = doc->late_init(mtd))) {
/* DBB note: i believe nand_release is necessary here, as
buffers may have been allocated in nand_base. Check with
Thomas. FIX ME! */
--
1.9.1