[PATCH] mfd: rtsx: add support for rts522A
From: micky_ching
Date: Thu Apr 16 2015 - 03:40:09 EST
From: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
rts522a(rts5227s) is derived from rts5227, and mainly same with rts5227.
Add it to file mfd/rts5227.c to support this chip.
Signed-off-by: Micky Ching <micky_ching@xxxxxxxxxxxxxx>
---
drivers/mfd/rts5227.c | 77 ++++++++++++++++++++++++++++++++++++++++++--
drivers/mfd/rtsx_pcr.c | 5 +++
drivers/mfd/rtsx_pcr.h | 3 ++
include/linux/mfd/rtsx_pci.h | 6 ++++
4 files changed, 89 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/rts5227.c b/drivers/mfd/rts5227.c
index ce012d7..cf13e66 100644
--- a/drivers/mfd/rts5227.c
+++ b/drivers/mfd/rts5227.c
@@ -26,6 +26,14 @@
#include "rtsx_pcr.h"
+static u8 rts5227_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+ return val & 0x0F;
+}
+
static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
{
u8 driving_3v3[4][3] = {
@@ -88,7 +96,7 @@ static void rts5227_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3, 0x01, 0);
if (pm_state == HOST_ENTER_S3)
- rtsx_pci_write_register(pcr, PM_CTRL3, 0x10, 0x10);
+ rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x10);
rtsx_pci_write_register(pcr, FPDCTL, 0x03, 0x03);
}
@@ -121,7 +129,7 @@ static int rts5227_extra_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0xB8);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PETXCFG, 0xB8, 0x88);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PM_CTRL3, 0x10, 0x00);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, pcr->reg_pm_ctrl3, 0x10, 0x00);
return rtsx_pci_send_cmd(pcr, 100);
}
@@ -298,8 +306,73 @@ void rts5227_init_params(struct rtsx_pcr *pcr)
pcr->tx_initial_phase = SET_CLOCK_PHASE(27, 27, 15);
pcr->rx_initial_phase = SET_CLOCK_PHASE(30, 7, 7);
+ pcr->ic_version = rts5227_get_ic_version(pcr);
pcr->sd_pull_ctl_enable_tbl = rts5227_sd_pull_ctl_enable_tbl;
pcr->sd_pull_ctl_disable_tbl = rts5227_sd_pull_ctl_disable_tbl;
pcr->ms_pull_ctl_enable_tbl = rts5227_ms_pull_ctl_enable_tbl;
pcr->ms_pull_ctl_disable_tbl = rts5227_ms_pull_ctl_disable_tbl;
+
+ pcr->reg_pm_ctrl3 = PM_CTRL3;
+}
+
+static int rts522a_optimize_phy(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ err = rtsx_pci_write_register(pcr, RTS522A_PM_CTRL3, D3_DELINK_MODE_EN,
+ 0x00);
+ if (err < 0)
+ return err;
+
+ if (is_version(pcr, 0x522A, IC_VER_A)) {
+ err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
+ PHY_RCR2_INIT_27S);
+ if (err)
+ return err;
+
+ rtsx_pci_write_phy_register(pcr, PHY_RCR1, PHY_RCR1_INIT_27S);
+ rtsx_pci_write_phy_register(pcr, PHY_FLD0, PHY_FLD0_INIT_27S);
+ rtsx_pci_write_phy_register(pcr, PHY_FLD3, PHY_FLD3_INIT_27S);
+ rtsx_pci_write_phy_register(pcr, PHY_FLD4, PHY_FLD4_INIT_27S);
+ }
+
+ return 0;
+}
+
+static int rts522a_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ rts5227_extra_init_hw(pcr);
+
+ rtsx_pci_write_register(pcr, FUNC_FORCE_CTL, FUNC_FORCE_UPME_XMT_DBG,
+ FUNC_FORCE_UPME_XMT_DBG);
+ rtsx_pci_write_register(pcr, PCLK_CTL, 0x04, 0x04);
+ rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
+ rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 0xFF, 0x11);
+
+ return 0;
+}
+
+/* rts522a operations mainly derived from rts5227, except phy/hw init setting.
+ */
+static const struct pcr_ops rts522a_pcr_ops = {
+ .fetch_vendor_settings = rts5227_fetch_vendor_settings,
+ .extra_init_hw = rts522a_extra_init_hw,
+ .optimize_phy = rts522a_optimize_phy,
+ .turn_on_led = rts5227_turn_on_led,
+ .turn_off_led = rts5227_turn_off_led,
+ .enable_auto_blink = rts5227_enable_auto_blink,
+ .disable_auto_blink = rts5227_disable_auto_blink,
+ .card_power_on = rts5227_card_power_on,
+ .card_power_off = rts5227_card_power_off,
+ .switch_output_voltage = rts5227_switch_output_voltage,
+ .cd_deglitch = NULL,
+ .conv_clk_and_div_n = NULL,
+ .force_power_down = rts5227_force_power_down,
+};
+
+void rts522a_init_params(struct rtsx_pcr *pcr)
+{
+ rts5227_init_params(pcr);
+
+ pcr->reg_pm_ctrl3 = RTS522A_PM_CTRL3;
}
diff --git a/drivers/mfd/rtsx_pcr.c b/drivers/mfd/rtsx_pcr.c
index a66540a..ccd8918 100644
--- a/drivers/mfd/rtsx_pcr.c
+++ b/drivers/mfd/rtsx_pcr.c
@@ -55,6 +55,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x5229), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5289), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5227), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x522A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5249), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5287), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5286), PCI_CLASS_OTHERS << 16, 0xFF0000 },
@@ -1102,6 +1103,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
rts5227_init_params(pcr);
break;
+ case 0x522A:
+ rts522a_init_params(pcr);
+ break;
+
case 0x5249:
rts5249_init_params(pcr);
break;
diff --git a/drivers/mfd/rtsx_pcr.h b/drivers/mfd/rtsx_pcr.h
index ce48842..931d1ae 100644
--- a/drivers/mfd/rtsx_pcr.h
+++ b/drivers/mfd/rtsx_pcr.h
@@ -27,6 +27,8 @@
#define MIN_DIV_N_PCR 80
#define MAX_DIV_N_PCR 208
+#define RTS522A_PM_CTRL3 0xFF7E
+
#define RTS524A_PME_FORCE_CTL 0xFF78
#define RTS524A_PM_CTRL3 0xFF7E
@@ -38,6 +40,7 @@ void rts5229_init_params(struct rtsx_pcr *pcr);
void rtl8411_init_params(struct rtsx_pcr *pcr);
void rtl8402_init_params(struct rtsx_pcr *pcr);
void rts5227_init_params(struct rtsx_pcr *pcr);
+void rts522a_init_params(struct rtsx_pcr *pcr);
void rts5249_init_params(struct rtsx_pcr *pcr);
void rts524a_init_params(struct rtsx_pcr *pcr);
void rts525a_init_params(struct rtsx_pcr *pcr);
diff --git a/include/linux/mfd/rtsx_pci.h b/include/linux/mfd/rtsx_pci.h
index ff843e7..7eb7cba 100644
--- a/include/linux/mfd/rtsx_pci.h
+++ b/include/linux/mfd/rtsx_pci.h
@@ -589,6 +589,7 @@
#define FORCE_ASPM_NO_ASPM 0x00
#define PM_CLK_FORCE_CTL 0xFE58
#define FUNC_FORCE_CTL 0xFE59
+#define FUNC_FORCE_UPME_XMT_DBG 0x02
#define PERST_GLITCH_WIDTH 0xFE5C
#define CHANGE_LINK_STATE 0xFE5B
#define RESET_LOAD_REG 0xFE5E
@@ -712,6 +713,7 @@
#define PHY_RCR1 0x02
#define PHY_RCR1_ADP_TIME_4 0x0400
#define PHY_RCR1_VCO_COARSE 0x001F
+#define PHY_RCR1_INIT_27S 0x0A1F
#define PHY_SSCCR2 0x02
#define PHY_SSCCR2_PLL_NCODE 0x0A00
#define PHY_SSCCR2_TIME0 0x001C
@@ -724,6 +726,7 @@
#define PHY_RCR2_FREQSEL_12 0x0040
#define PHY_RCR2_CDR_SC_12P 0x0010
#define PHY_RCR2_CALIB_LATE 0x0002
+#define PHY_RCR2_INIT_27S 0xC152
#define PHY_SSCCR3 0x03
#define PHY_SSCCR3_STEP_IN 0x2740
#define PHY_SSCCR3_CHECK_DELAY 0x0008
@@ -800,12 +803,14 @@
#define PHY_ANA1A_RXT_BIST 0x0500
#define PHY_ANA1A_TXR_BIST 0x0040
#define PHY_ANA1A_REV 0x0006
+#define PHY_FLD0_INIT_27S 0x2546
#define PHY_FLD1 0x1B
#define PHY_FLD2 0x1C
#define PHY_FLD3 0x1D
#define PHY_FLD3_TIMER_4 0x0800
#define PHY_FLD3_TIMER_6 0x0020
#define PHY_FLD3_RXDELINK 0x0004
+#define PHY_FLD3_INIT_27S 0x0004
#define PHY_ANA1D 0x1D
#define PHY_ANA1D_DEBUG_ADDR 0x0004
#define _PHY_FLD0 0x1D
@@ -824,6 +829,7 @@
#define PHY_FLD4_BER_COUNT 0x00E0
#define PHY_FLD4_BER_TIMER 0x000A
#define PHY_FLD4_BER_CHK_EN 0x0001
+#define PHY_FLD4_INIT_27S 0x5C7F
#define PHY_DIG1E 0x1E
#define PHY_DIG1E_REV 0x4000
#define PHY_DIG1E_D0_X_D1 0x1000
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/