[PATCH 02/21] ND NFIT-Defined/NVIDIMM Subsystem
From: Dan Williams
Date: Fri Apr 17 2015 - 21:38:27 EST
Maintainer information and documenation for drivers/block/nd/
Cc: Andy Lutomirski <luto@xxxxxxxxxxxxxx>
Cc: Boaz Harrosh <boaz@xxxxxxxxxxxxx>
Cc: H. Peter Anvin <hpa@xxxxxxxxx>
Cc: Jens Axboe <axboe@xxxxxx>
Cc: Ingo Molnar <mingo@xxxxxxxxxx>
Cc: Christoph Hellwig <hch@xxxxxx>
Cc: Neil Brown <neilb@xxxxxxx>
Cc: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Dan Williams <dan.j.williams@xxxxxxxxx>
---
Documentation/blockdev/nd.txt | 867 +++++++++++++++++++++++++++++++++++++++++
MAINTAINERS | 34 +-
2 files changed, 895 insertions(+), 6 deletions(-)
create mode 100644 Documentation/blockdev/nd.txt
diff --git a/Documentation/blockdev/nd.txt b/Documentation/blockdev/nd.txt
new file mode 100644
index 000000000000..bcfdf21063ab
--- /dev/null
+++ b/Documentation/blockdev/nd.txt
@@ -0,0 +1,867 @@
+ The NFIT-Defined/NVDIMM Sub-system (ND)
+
+ nd - kernel abi / device-model & ndctl - userspace helper library
+ linux-nvdimm@xxxxxxxxxxxx
+ v9: April 17th, 2015
+
+
+ Glossary
+
+ Overview
+ Supporting Documents
+ Git Trees
+
+ NFIT Terminology and NVDIMM Types
+
+ Why BLK?
+ PMEM vs BLK (SPA vs BDW)
+ BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
+
+ Example NFIT Diagram
+
+ ND Device Model/ABI and NDCTL API
+ NDCTL: Context
+ ndctl: instantiate a new library context example
+
+ ND/NDCTL: Bus
+ nd: control class device in /sys/class
+ nd: bus layout
+ ndctl: bus enumeration example
+
+ ND/NDCTL: DIMM (NMEM)
+ nd: DIMM (NMEM) layout
+ ndctl: DIMM enumeration example
+
+ ND/NDCTL: Region
+ nd: region layout
+ ndctl: region enumeration example
+ Why Not Encode the Region Type into the Region Name?
+ How Do I Determine the Major Type of a Region?
+
+ ND/NDCTL: Namespace
+ nd: namespace layout
+ ndctl: namespace enumeration example
+ ndctl: namespace creation example
+ Why the Term ânamespaceâ?
+
+ ND/NDCTL: Block Translation Table âbttâ
+ nd: btt layout
+ ndctl: btt creation example
+
+ Summary NDCTL Diagram
+
+
+Glossary
+--------
+
+NFIT: NVDIMM Firmware Interface Table
+
+SPA: System Physical Address also refers to an NFIT system-physical
+address table entry describing contiguous persistent memory range.
+
+DPA: DIMM Physical Address, is a DIMM-relative offset. With one DIMM in
+the system there would be a 1:1 SPA:DPA association. Once more DIMMs
+are added an interleave-description-table provided by NFIT is needed to
+decode a SPA to a DPA.
+
+DCR: DIMM Control Region Descriptor, an NFIT sub-table entry conveying
+the vendor, format, revision, and geometry of the related
+block-data-windows.
+
+BDW: Block Data Window Region Descriptor, an NFIT sub-table referenced
+by a DCR locating a set of data transfer apertures and control registers
+in system memory.
+
+PMEM: A linux block device which provides access to an SPA range. A PMEM
+device is capable of DAX (see below).
+
+DAX: File system extensions to bypass the page cache and block layer to
+map persistent memory, from a PMEM block device, directly into a process
+address space.
+
+BLK: A linux block device which accesses NVDIMM storage through a BDW
+(block-data-window aperture). A BLK device is not amenable to DAX.
+
+DSM: Device Specific Method, refers to a runtime service provided by
+platform firmware to send formatted control/configuration messages to a
+DIMM device. In ACPI this is an _DSM attribute of an object.
+
+BTT: Block Translation Table: Persistent memory is byte addressable.
+Existing software may have an expectation that the power-fail-atomicity
+of writes is at least one sector, 512 bytes. The BTT is an indirection
+table with atomic update semantics to front a PMEM/BLK block device
+driver and present arbitrary atomic sector sizes.
+
+LABEL: Metadata stored on a DIMM device that partitions and identifies
+(persistently names) storage between PMEM and BLK. It also partitions
+BLK storage to host BTTs with different parameters per BLK-partition.
+Note that traditional partition tables, GPT/MBR, are layered on top of a
+BLK or PMEM device.
+
+
+
+
+Overview
+--------
+
+The âNVDIMM Firmware Interface Tableâ (NFIT) defines a set of tables
+that describe the non-volatile memory resources in a platform. Platform
+firmware provides this table as well as runtime-services for sending
+control and configuration messages to capable NVDIMM devices. NFIT is a
+new top-level table in ACPI 6. The Linux ND subsystem is designed as a
+generic mechanism that can register a binary NFIT from any provider,
+ACPI being just one example of a provider. The unit test infrastructure
+in the kernel exploits this capability to provide multiple sample NFITs
+via custom test-platform-devices.
+
+
+Supporting Documents
+ACPI 6: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf
+NVDIMM Namespace: http://pmem.io/documents/NVDIMM_Namespace_Spec.pdf
+DSM Interface Example: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
+Driver Writerâs Guide: http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf
+
+
+Git Trees
+ND: https://git.kernel.org/cgit/linux/kernel/git/djbw/nvdimm.git/log/?h=nd
+NDCTL: https://github.com/pmem/ndctl.git
+PMEM: https://github.com/01org/prd
+
+
+NFIT Terminology and NVDIMM Types
+---------------------------------
+
+Prior to the arrival of the NFIT, non-volatile memory was described to a
+system in various ad-hoc ways. Usually only the bare minimum was
+provided, namely, a single SPA range where writes are expected to be
+durable after a system power loss. Now, the NFIT specification
+standardizes not only the description SPA ranges, but also DCR/BDW
+(block-aperture access) and DSM entry points for control/configuration.
+
+
+For each NFIT-defined I/O interface (SPA, DCR/BDW), ND provides a block
+device driver:
+
+
+1. PMEM (nd_pmem.ko): Drives an NFIT system-physical address (SPA)
+ range. A SPA range is contiguous in system memory and may be
+ interleaved (hardware memory controller striped) across multiple DIMMs.
+ When a SPA is interleaved the NFIT optionally provides descriptions of
+ which DIMMs are participating in the interleave.
+
+ Note, while ND describes SPAs with backing DIMM information
+ (ND_NAMESPACE_PMEM) with a different device-type than SPAs without such
+ a description (ND_NAMESPACE_IO), to nd_pmem there is no distinction.
+ The different device-types are an implementation detail that userspace
+ can exploit to implement policies like âonly interface with SPA ranges
+ from certain DIMMsâ.
+
+
+2. BLK (nd_blk.ko): This driver performs I/O using a set of DCR/BDW
+ defined apertures. A set of apertures will all access just one DIMM.
+ Multiple windows allow multiple concurrent accesses, much like
+ tagged-command-queuing, and would likely be used by different threads or
+ different CPUs.
+
+ The NFIT specification defines a standard format for a BDW, but the spec
+ also allows for vendor specific layouts. As of this writing ând_blkâ
+ only supports the example interface detailed in the âDSM Interface
+ Exampleâ. If another BDW format arrives in the future this can added as
+ a new sub-device-type to nd_blk or as a new ND device type with its own
+ driver.
+
+
+Why BLK?
+--------
+
+While PMEM provides direct byte-addressable CPU-load/store access to
+NVDIMM storage, it does not provide the best system RAS (recovery,
+availability, and serviceability) model. An access to a corrupted SPA
+address causes a cpu exception while an access to a corrupted address
+through a BDW aperture causes that block window to raise an error status
+in a register. The latter is more aligned with the standard error model
+that host-bus-adapter attached disks present. Also, if an administrator
+ever wants to replace a memory it is easier to service a system at DIMM
+module boundaries. Compare this to PMEM where data could be interleaved
+in an opaque hardware specific manner across several DIMMs.
+
+
+PMEM vs BLK (SPA vs BDW)
+------------------------
+
+BDWs solve this RAS problem, but their presence is also the major
+contributing factor to the complexity of the ND subsystem. They
+complicate the implementation because PMEM and BLK alias in DPA space.
+Any given DIMMâs DPA-range may contribute to one or more SPA sets of
+interleaved DIMMs, *and* may also be accessed in its entirety through
+its BDW. Accessing a DPA through a SPA while simultaneously accessing
+the same DPA through a BDW has undefined results. For this reason,
+DIMMâs with this dual interface configuration include a DSM function to
+store/retrieve a LABEL. The LABEL effectively partitions the DPA-space
+into exclusive SPA and BDW accessible regions. For simplicity a DIMM is
+allowed a PMEM âregionâ per each interleave set in which it is a member.
+The remaining DPA space can be carved into an arbitrary number of BLK
+devices with discontiguous extents.
+
+
+BLK-REGIONs, PMEM-REGIONs, Atomic Sectors, and DAX
+--------------------------------------------------
+One of the few reasons to allow multiple BLK namespaces per REGION is so
+that each BLK-namespace can be configured with a BTT with unique atomic
+sector sizes. While a PMEM device can host a BTT the LABEL
+specification does not provide for a sector size to be specified for a
+PMEM namespace. This is due to the expectation that the primary usage
+model for PMEM is via DAX, and the BTT is incompatible with DAX.
+However, for the cases where an application or filesystem still needs
+atomic sector update guarantees it can register a BTT on a PMEM device
+or partition. See ND/NDCTL: Block Translation Table âbttâ
+
+
+________________
+
+
+Example NFIT Diagram
+
+
+For the remainder of this document the following diagram and device
+names will be referenced for the example sysfs layouts.
+
+
+ (a) (b) DIMM BLK-REGION
+ +-------------------+--------+--------+--------+
++------+ | pm0.0 | blk2.0 | pm1.0 | blk2.1 | 0 region2
+| imc0 +--+- - - region0- - - +--------+ +--------+
++--+---+ | pm0.0 | blk3.0 | pm1.0 | blk3.1 | 1 region3
+ | +-------------------+--------v v--------+
++--+---+ | |
+| cpu0 | region1
++--+---+ | |
+ | +----------------------------^ ^--------+
++--+---+ | blk4.0 | pm1.0 | blk4.0 | 2 region4
+| imc1 +--+----------------------------| +--------+
++------+ | blk5.0 | pm1.0 | blk5.0 | 3 region5
+ +----------------------------+--------+--------+
+
+
+In this platform we have four DIMMs and two memory controllers in one
+socket. Each unique interface (BLK or PMEM) to DPA space is identified
+by a region device with a dynamically assigned id (REGION0 - REGION5).
+
+
+1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A
+ single PMEM namespace is created in the REGION0-SPA-range that spans
+ DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that
+ interleaved SPA range is reclaimed as BDW accessed space starting at
+ DPA-offset (a) into each DIMM. In that reclaimed space we create two
+ BDW "namespaces" from REGION2 and REGION3 where "blk2.0" and "blk3.0"
+ are just human readable names that could be set to any user-desired name
+ in the LABEL.
+
+
+2. In the last portion of DIMM0 and DIMM1 we have an interleaved SPA
+ range, REGION1, that spans those two DIMMs as well as DIMM2 and DIMM3.
+ Some of REGION1 allocated to a PMEM namespace named "pm1.0" the rest is
+ reclaimed in 4 BDW namespaces (for each DIMM in the interleave set),
+ "blk2.1", "blk3.1", "blk4.0", and "blk5.0".
+
+
+3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1
+ interleaved SPA range (i.e. the DPA address below offset (b) are also
+ included in the "blk4.0" and "blk5.0" namespaces. Note, that this
+ example shows that BDW namespaces don't need to be contiguous in
+ DPA-space.
+
+This bus is provided by the kernel under the device
+/sys/devices/platform/nfit_test.0 when CONFIG_NFIT_TEST is enabled and
+the nfit_test.ko module is loaded.
+
+
+ND Device Model/ABI and NDCTL API
+---------------------------------
+
+What follows is a description of the ND sysfs layout and a corresponding
+object hierarchy diagram as viewed through the NDCTL api. The example
+sysfs paths and diagrams are relative to the Example NFIT Diagram which
+is also the NFIT used in the ând/ndctlâ unit test.
+
+
+NDCTL: Context
+Every api call in the NDCTL library requires a context that holds the
+logging parameters and other library instance state. The library is
+based on the libabc template:
+https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git/
+
+ndctl: instantiate a new library context example
+
+ struct ndctl_ctx *ctx;
+
+ if (ndctl_new(&ctx) == 0)
+ return ctx;
+ else
+ return NULL;
+
+
+ND/NDCTL: Bus
+A bus has a 1:1 relationship with an NFIT. The current expectation for
+ACPI based systems is that there is only ever one platform-global NFIT.
+That said, it is trivial to register multiple NFITs, the specification
+does not preclude it. The infrastructure supports multiple busses and
+we we use this capability to test multiple NFIT configurations in the
+unit test.
+
+nd: control class device in /sys/class
+
+This character device accepts DSM messages to be passed to DIMM
+identified by its NFIT handle.
+
+ /sys/class/nd/ndctl0
+ |-- dev
+ |-- device -> ../../../ndbus0
+ |-- subsystem -> ../../../../../../../class/nd
+
+
+nd: bus layout
+
+ /sys/devices/platform/nfit_test.0/ndbus0
+ |-- btt0
+ |-- btt_seed
+ |-- commands
+ |-- nd
+ |-- nmem0
+ |-- nmem1
+ |-- nmem2
+ |-- nmem3
+ |-- provider
+ |-- region0
+ |-- region1
+ |-- region2
+ |-- region3
+ |-- region4
+ |-- region5
+ |-- revision
+ |-- uevent
+ `-- wait_probe
+
+
+ndctl: bus enumeration example
+
+Find the 'bus' handle that describes the bus from Example NFIT Diagram
+
+
+ static struct ndctl_bus *get_bus_by_provider(struct ndctl_ctx *ctx,
+ const char *provider)
+ {
+ struct ndctl_bus *bus;
+
+
+ ndctl_bus_foreach(ctx, bus)
+ if (strcmp(provider, ndctl_bus_get_provider(bus)) == 0)
+ return bus;
+
+
+ return NULL;
+ }
+
+ bus = get_bus_by_provider(ctx, ânfit_test.0â);
+
+
+ND/NDCTL: DIMM (NMEM)
+
+The DIMM object identifies the NFIT âhandleâ and a âphys_idâ for a given
+memory device. The âhandleâ is derived from the DIMMâs physical
+location (socket, memory-controller, channel, slot). The âphys_idâ is
+used for looking up DIMM details in other platform tables. The handle
+value is also used to send control/configuration messages via ioctl
+through the ândctl0â device in the given example. The kernel id (âNâ in
+âDIMMNâ) for the device is dynamically assigned. The âvendorâ,
+âdeviceâ, ârevisionâ and âformatâ attributes are optionally available if
+the NFIT publishes a DCR (DIMM-control-region) for the given memory
+device. These latter attributes are only useful in the presence of a
+vendor-specific DIMM.
+
+
+Note that the kernel device name for âDIMMsâ is ânmemXâ. The NFIT
+describes these devices via âMemory Device to System Physical Address
+Range Mapping Structureâ, and there is no requirement that they actually
+be DIMMs, so we use a more generic name.
+
+
+nd: DIMM (NMEM) layout
+
+ /sys/devices/platform/nfit_test.0/ndbus0/
+ |-- nmem0
+ | |-- available_slots
+ | |-- commands
+ | |-- dev
+ | |-- device
+ | |-- devtype
+ | |-- driver -> ../../../../../bus/nd/drivers/nd_dimm
+ | |-- format
+ | |-- handle
+ | |-- modalias
+ | |-- phys_id
+ | |-- revision
+ | |-- serial
+ | |-- state
+ | |-- subsystem -> ../../../../../bus/nd
+ | |-- uevent
+ | `-- vendor
+ |-- nmem1
+ [..]
+
+ndctl: DIMM enumeration example
+
+Note, DIMMs are identified by an ânfit_handleâ which is a 32-bit value
+where:
+
+ Bit 3:0 DIMM number within the memory channel
+ Bit 7:4 memory channel number
+ Bit 11:8 memory controller ID
+ Bit 15:12 socket ID
+ Bit 27:16 Node Controller ID
+ Bit 31:28 Reserved
+
+ static struct ndctl_dimm *get_dimm_by_handle(struct ndctl_bus *bus,
+ unsigned int handle)
+ {
+ struct ndctl_dimm *dimm;
+
+
+ ndctl_dimm_foreach(bus, dimm)
+ if (ndctl_dimm_get_handle(dimm) == handle)
+ return dimm;
+
+
+ return NULL;
+ }
+
+ #define DIMM_HANDLE(n, s, i, c, d) \
+ (((n & 0xfff) << 16) | ((s & 0xf) << 12) | ((i & 0xf) << 8) \
+ | ((c & 0xf) << 4) | (d & 0xf))
+
+ dimm = get_dimm_by_handle(bus, DIMM_HANDLE(0, 0, 0, 0, 0));
+
+
+ND/NDCTL: Region
+A generic REGION device is registered for each SPA or DCR/BDW. Per the
+example there are 6 regions: 2 SPAs and 4 BDWs on the ânfit_test.0â bus.
+The primary role of regions are to be a container of âmappingsâ. A
+mapping is a tuple of <DIMM, DPA-start-offset, length>.
+
+The ND core provides a driver for these REGION devices. This driver is
+responsible for reconciling the aliased mappings across all regions,
+parsing the LABEL, if present, and then emitting ânamespaceâ devices
+with the resolved/exclusive DPA-boundaries for a ND PMEM or BLK device
+driver to consume.
+
+In addition to the generic attributes of âmappingâs, âinterleave_waysâ
+and âsizeâ the REGION device also exports some convenience attributes.
+ânstypeâ indicates the integer type of namespace-device this region
+emits, âdevtypeâ duplicates the DEVTYPE variable stored by udev at the
+âaddâ event, âmodaliasâ duplicates the MODALIAS variable stored by udev
+at the âaddâ event, and finally, the optional âspa_indexâ is provided in
+the case where the region is defined by a SPA.
+
+nd: region layout
+
+ |-- region0
+ | |-- available_size
+ | |-- devtype
+ | |-- driver -> ../../../../../bus/nd/drivers/nd_region
+ | |-- init_namespaces
+ | |-- mapping0
+ | |-- mapping1
+ | |-- mappings
+ | |-- modalias
+ | |-- namespace0.0
+ | |-- namespace_seed
+ | |-- nstype
+ | |-- set_cookie
+ | |-- size
+ | |-- spa_index
+ | |-- subsystem -> ../../../../../bus/nd
+ | `-- uevent
+ |-- region1
+ | |-- available_size
+ | |-- devtype
+ | |-- driver -> ../../../../../bus/nd/drivers/nd_region
+ | |-- init_namespaces
+ | |-- mapping0
+ | |-- mapping1
+ | |-- mapping2
+ | |-- mapping3
+ | |-- mappings
+ | |-- modalias
+ | |-- namespace1.0
+ | |-- namespace_seed
+ | |-- nstype
+ | |-- set_cookie
+ | |-- size
+ | |-- spa_index
+ | |-- subsystem -> ../../../../../bus/nd
+ | `-- uevent
+ |-- region2
+ [..]
+
+
+ndctl: region enumeration example
+
+Sample region retrieval routines based on NFIT-unique data like
+âspa_indexâ (interleave set id) for PMEM and ânfit_handleâ (dimm id) for
+BLK.
+
+ static struct ndctl_region *get_pmem_region_by_spa_index(struct ndctl_bus *bus,
+ unsigned int spa_index)
+ {
+ struct ndctl_region *region;
+
+
+ ndctl_region_foreach(bus, region) {
+ if (ndctl_region_get_type(region) != ND_DEVICE_REGION_PMEM)
+ continue;
+ if (ndctl_region_get_spa_index(region) == spa_index)
+ return region;
+ }
+ return NULL;
+ }
+
+
+ static struct ndctl_region *get_blk_region_by_dimm_handle(struct ndctl_bus *bus,
+ unsigned int handle)
+ {
+ struct ndctl_region *region;
+
+
+ ndctl_region_foreach(bus, region) {
+ struct ndctl_mapping *map;
+
+
+ if (ndctl_region_get_type(region) != ND_DEVICE_REGION_BLOCK)
+ continue;
+ ndctl_mapping_foreach(region, map) {
+ struct ndctl_dimm *dimm = ndctl_mapping_get_dimm(map);
+
+
+ if (ndctl_dimm_get_handle(dimm) == handle)
+ return region;
+ }
+ }
+ return NULL;
+ }
+
+
+Why Not Encode the Region Type into the Region Name?
+
+At first glance it seems since NFIT defines just PMEM and BLK interface
+types that we should simply name REGION devices with something derived
+from those type names. However, the ND subsystem explicitly keeps the
+REGION name generic and expects userspace to always consider the
+region-attributes for 4 reasons:
+
+1. There are already more than two REGION and ânamespaceâ types. For
+ PMEM there are two subtypes. As mentioned previously we have PMEM where
+ the constituent DIMM devices are known and anonymous PMEM. For BLK
+ regions the NFIT specification already anticipates vendor specific
+ implementations. The exact distinction of what a region contains is in
+ the region-attributes not the region-name or the region-devtype.
+
+2. A region with zero child-namespaces is a possible configuration. For
+ example, the NFIT allows for a DCR to be published without a
+ corresponding BDW. This equates to a DIMM that can only accept
+ control/configuration messages, but no i/o through a descendant block
+ device. Again, this âtypeâ is advertised in the attributes (âmappingsâ
+ == 0) and the name does not tell you much.
+
+3. What if a third major interface type arises in the future? Outside
+ of vendor specific implementations, itâs not difficult to envision a
+ third class of interface type beyond BLK and PMEM. With a generic name
+ for the REGION level of the device-hierarchy old userspace
+ implementations can still make sense of new kernel advertised
+ region-types. Userspace can always rely on the generic region
+ attributes like âmappingsâ, âsizeâ, etc and the expected child devices
+ named ânamespaceâ. This generic format of the device-model hierarchy
+ allows the ND and NDCTL implementations to be more uniform and
+ future-proof.
+
+4. There are more robust mechanisms for determining the major type of a
+ region than a device name. See the next section, How Do I Determine the
+ Major Type of a Region?
+
+
+How Do I Determine the Major Type of a Region?
+
+Outside of the blanket recommendation of âuse the ndctl libraryâ, or
+simply looking at the kernel header to decode the ânstypeâ integer
+attribute, here are some other options.
+
+
+1. module alias lookup:
+ The whole point of region/namespace device type differentiation is to
+ decide which block-device driver will attach to a given ND namespace.
+ One can simply use the modalias to lookup the resulting module. Itâs
+ important to note that this method is robust in the presence of a
+ vendor-specific driver down the road. If a vendor-specific
+ implementation wants to supplant the standard nd_blk driver it can with
+ minimal impact to the rest of ND.
+
+ In fact, a vendor may also want to have a vendor-specific region-driver
+ (outside of nd_region). For example, if a vendor defined its own LABEL
+ format it would need its own region driver to parse that LABEL and emit
+ the resulting namespaces. The output from module resolution is more
+ accurate than a region-name or region-devtype.
+
+
+2. udev:
+ The kernel âdevtypeâ is registered in the udev database
+ # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region0
+ P: /devices/platform/nfit_test.0/ndbus0/region0
+ E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region0
+ E: DEVTYPE=nd_pmem
+ E: MODALIAS=nd:t2
+ E: SUBSYSTEM=nd
+
+
+ # udevadm info --path=/devices/platform/nfit_test.0/ndbus0/region4
+ P: /devices/platform/nfit_test.0/ndbus0/region4
+ E: DEVPATH=/devices/platform/nfit_test.0/ndbus0/region4
+ E: DEVTYPE=nd_blk
+ E: MODALIAS=nd:t3
+ E: SUBSYSTEM=nd
+
+
+ ...and is available as a region attribute, but keep in mind that the
+ âdevtypeâ does not indicate sub-type variations and scripts should
+ really be understanding the other attributes.
+
+
+3. type specific attributes:
+ As it currently stands a BDW region will never have a âspa_indexâ
+ attribute. A DCR region with a âmappingsâ value of 0 is, as mentioned
+ above, a DIMM that does not allow I/O. A PMEM region with a âmappingsâ
+ value of zero is a simple SPA range.
+
+
+ND/NDCTL: Namespace
+
+A REGION, after resolving DPA aliasing and LABEL specified boundaries,
+surfaces one or more ânamespaceâ devices. The arrival of a ânamespaceâ
+device currently triggers either the nd_blk or nd_pmem driver to load
+and register a disk/block device.
+
+
+nd: namespace layout
+Here is a sample layout from the three major types of NAMESPACE where
+namespace0.0 represents DIMM-info-backed PMEM (note that it has a âuuidâ
+attribute), namespace2.0 represents a BLK namespace (note it has a
+âsector_sizeâ attribute) that, and namespace6.0 represents an anonymous
+PMEM namespace (note that has no âuuidâ attribute due to not support a
+LABEL).
+
+ /sys/devices/platform/nfit_test.0/ndbus0/region0/namespace0.0
+ |-- alt_name
+ |-- devtype
+ |-- dpa_extents
+ |-- modalias
+ |-- resource
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ |-- uevent
+ `-- uuid
+ /sys/devices/platform/nfit_test.0/ndbus0/region2/namespace2.0
+ |-- alt_name
+ |-- devtype
+ |-- dpa_extents
+ |-- modalias
+ |-- sector_size
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ |-- uevent
+ `-- uuid
+ /sys/devices/platform/nfit_test.1/ndbus1/region6/namespace6.0
+ |-- block
+ | `-- pmem0
+ |-- devtype
+ |-- driver -> ../../../../../../bus/nd/drivers/pmem
+ |-- modalias
+ |-- resource
+ |-- size
+ |-- subsystem -> ../../../../../../bus/nd
+ |-- type
+ `-- uevent
+
+
+ndctl: namespace enumeration example
+Namespaces are indexed relative to their parent region, example below.
+These indexes are mostly static from boot to boot, but subsystem makes
+no guarantees in this regard. For a static namespace identifier use its
+âuuidâ attribute.
+
+ static struct ndctl_namespace *get_namespace_by_id(struct ndctl_region *region,
+ unsigned int id)
+ {
+ struct ndctl_namespace *ndns;
+
+
+ ndctl_namespace_foreach(region, ndns)
+ if (ndctl_namespace_get_id(ndns) == id)
+ return ndns;
+
+
+ return NULL;
+ }
+
+
+ndctl: namespace creation example
+
+Idle namespaces are automatically created by the kernel if a given
+region has enough available capacity to create a new namespace.
+Namespace instantiation involves finding an idle namespace and
+configuring it. For the most part the setting of namespace attributes
+can occur in any order, the only constraint is that âuuidâ must be set
+before âsizeâ. This enables the kernel to track DPA allocations
+internally with a static identifier.
+
+
+ static int configure_namespace(struct ndctl_region *region,
+ struct ndctl_namespace *ndns,
+ struct namespace_parameters *parameters)
+ {
+ char devname[50];
+
+
+ snprintf(devname, sizeof(devname), "namespace%d.%d",
+ ndctl_region_get_id(region), paramaters->id);
+
+
+ ndctl_namespace_set_alt_name(ndns, devname);
+ /* âuuidâ must be set prior to setting size! */
+ ndctl_namespace_set_uuid(ndns, paramaters->uuid);
+ ndctl_namespace_set_size(ndns, paramaters->size);
+ /* unlike pmem namespaces, blk namespaces have a sector size */
+ if (parameters->lbasize)
+ ndctl_namespace_set_sector_size(ndns, parameters->lbasize);
+ ndctl_namespace_enable(ndns);
+ }
+
+Why the Term ânamespaceâ?
+1. Why not âvolumeâ for instance? âvolumeâ ran the risk of confusing ND
+ as a volume manager like device-mapper.
+
+
+2. The term originated to describe the sub-devices that can be created
+ within a NVME controller (see the nvme specification:
+ http://www.nvmexpress.org/specifications/), and NFIT namespaces are
+ meant to parallel the capabilities and configurability of
+ NVME-namespaces.
+
+
+ND/NDCTL: Block Translation Table âbttâ
+A BTT (design document: http://pmem.io/2014/09/23/btt.html) is a stacked
+block device driver that fronts either the whole block device or a
+partition of a block device emitted by either a PMEM or BLK NAMESPACE.
+
+
+nd: btt layout
+Every bus will start out with at least one BTT device which is the seed
+device. To activate it set the âbacking_devâ, âuuidâ, and âsector_sizeâ
+attributes and then bind the device to the nd_btt driver.
+
+ /sys/devices/platform/nfit_test.1/ndbus0/btt0/
+ âââ backing_dev
+ âââ delete
+ âââ devtype
+ âââ modalias
+ âââ sector_size
+ âââ subsystem -> ../../../../../bus/nd
+ âââ uevent
+ âââ uuid
+
+ndctl: btt creation example
+
+Similar to namespaces an idle BTT device is automatically created per
+bus. Each time this âseedâ btt device is configured and enabled a new
+seed is created. Creating a BTT configuration involves two steps of
+finding and idle BTT and assigning it to front a PMEM or BLK namespace.
+
+
+ static struct ndctl_btt *get_idle_btt(struct ndctl_bus *bus)
+ {
+ struct ndctl_btt *btt;
+
+
+ ndctl_btt_foreach(bus, btt)
+ if (!ndctl_btt_is_enabled(btt) && !ndctl_btt_is_configured(btt))
+ return btt;
+
+
+ return NULL;
+ }
+
+ static int configure_btt(struct ndctl_bus *bus, struct btt_parameters *parameters)
+ {
+ btt = get_idle_btt(bus);
+
+
+ sprintf(bdevpath, "/dev/%s",
+ ndctl_namespace_get_block_device(parameters->ndns));
+ ndctl_btt_set_uuid(btt, parameters->uuid);
+ ndctl_btt_set_sector_size(btt, parameters->sector_size);
+ ndctl_btt_set_backing_dev(btt, parametes->bdevpath);
+ ndctl_btt_enable(btt);
+ }
+
+
+Once instantiated a ând_bttâ link will be created under the
+âbacking_devâ (pmem0) block device:
+
+ /sys/block/pmem0/
+ âââ alignment_offset
+ âââ bdi -> ../../../../../../../virtual/bdi/259:0
+ âââ capability
+ âââ dev
+ âââ device -> ../../../namespace0.0
+ âââ discard_alignment
+ âââ ext_range
+ âââ holders
+ âââ inflight
+ âââ nd_btt -> ../../../../btt0
+
+
+...and a new inactive seed device will appear on the bus.
+
+
+Once a âbacking_devâ is disabled its associated BTT will be
+automatically deleted. This deletion is only at the device model level.
+In order to destroy a BTT the âinfo blockâ needs to be destroyed.
+
+
+Summary NDCTL Diagram
+---------------------
+
+For the given example above, here is the view of the objects as seen by
+the NDCTL api:
+ +---+
+ |CTX| +---------+ +--------------+ +---------------+
+ +-+-+ +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |
+ | | +---------+ +--------------+ +---------------+
++-------+ | | +---------+ +--------------+ +---------------+
+| DIMM0 <-+ | +-> REGION1 +---> NAMESPACE1.0 +--> PMEM6 "pm1.0" |
++-------+ | | | +---------+ +--------------+ +---------------+
+| DIMM1 <-+ +-v--+ | +---------+ +--------------+ +---------------+
++-------+ +-+BUS0+---> REGION2 +-+-> NAMESPACE2.0 +--> ND6 "blk2.0" |
+| DIMM2 <-+ +----+ | +---------+ | +--------------+ +----------------------+
++-------+ | | +-> NAMESPACE2.1 +--> ND5 "blk2.1" | BTT2 |
+| DIMM3 <-+ | +--------------+ +----------------------+
++-------+ | +---------+ +--------------+ +---------------+
+ +-> REGION3 +-+-> NAMESPACE3.0 +--> ND4 "blk3.0" |
+ | +---------+ | +--------------+ +----------------------+
+ | +-> NAMESPACE3.1 +--> ND3 "blk3.1" | BTT1 |
+ | +--------------+ +----------------------+
+ | +---------+ +--------------+ +---------------+
+ +-> REGION4 +---> NAMESPACE4.0 +--> ND2 "blk4.0" |
+ | +---------+ +--------------+ +---------------+
+ | +---------+ +--------------+ +----------------------+
+ +-> REGION5 +---> NAMESPACE5.0 +--> ND1 "blk5.0" | BTT0 |
+ +---------+ +--------------+ +---------------+------+
diff --git a/MAINTAINERS b/MAINTAINERS
index 4517613dc638..6bc0af450544 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6666,6 +6666,34 @@ S: Maintained
F: Documentation/hwmon/nct6775
F: drivers/hwmon/nct6775.c
+ND (NFIT-DEFINED/NVDIMM SUBSYSTEM)
+M: Dan Williams <dan.j.williams@xxxxxxxxx>
+L: linux-nvdimm@xxxxxxxxxxxx
+Q: https://patchwork.kernel.org/project/linux-nvdimm/list/
+S: Supported
+F: drivers/block/nd/*
+F: include/linux/nd.h
+F: include/uapi/linux/ndctl.h
+
+ND BLOCK APERTURE DRIVER
+M: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
+L: linux-nvdimm@xxxxxxxxxxxx
+S: Supported
+F: drivers/block/nd/blk.c
+F: drivers/block/nd/region_devs.c
+
+ND BLOCK TRANSLATION TABLE
+M: Vishal Verma <vishal.verma@xxxxxxxxxxxxxxx>
+L: linux-nvdimm@xxxxxxxxxxxx
+S: Supported
+F: drivers/block/nd/btt*
+
+ND PERSISTENT MEMORY DRIVER
+M: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
+L: linux-nvdimm@xxxxxxxxxxxx
+S: Supported
+F: drivers/block/nd/pmem.c
+
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@xxxxxxxxx>
L: linux-rdma@xxxxxxxxxxxxxxx
@@ -8071,12 +8099,6 @@ S: Maintained
F: Documentation/blockdev/ramdisk.txt
F: drivers/block/brd.c
-PERSISTENT MEMORY DRIVER
-M: Ross Zwisler <ross.zwisler@xxxxxxxxxxxxxxx>
-L: linux-nvdimm@xxxxxxxxxxxx
-S: Supported
-F: drivers/block/pmem.c
-
RANDOM NUMBER DRIVER
M: "Theodore Ts'o" <tytso@xxxxxxx>
S: Maintained
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/