Re: [PATCH V1 1/6] mfd: da9062: DA9062 MFD core driver
From: Paul Bolle
Date: Sat Apr 18 2015 - 04:27:52 EST
On Fri, 2015-04-17 at 15:23 +0100, S Twiss wrote:
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> +config MFD_DA9062
> + bool "Dialog Semiconductor DA9062 PMIC Support"
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + depends on I2C=y
> + help
> + Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
> + This includes the I2C driver and core APIs.
> + Additional drivers must be enabled in order to use the functionality
> + of the device.
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> +obj-$(CONFIG_MFD_DA9062) += da9062-core.o
MFD_DA9062 is a bool symbol. So da9062-core.o can never be part of a
module, right?
> --- /dev/null
> +++ b/drivers/mfd/da9062-core.c
> +#include <linux/module.h>
So you might not need this include.
> +MODULE_DEVICE_TABLE(of, da9062_dt_ids);
This macro will be preprocessed away for built-in code, according to
include/linux/module.h.
> +MODULE_DEVICE_TABLE(i2c, da9062_i2c_id);
Ditto.
> +static struct i2c_driver da9062_i2c_driver = {
> + .driver = {
> + .name = "da9062",
> + .of_match_table = of_match_ptr(da9062_dt_ids),
> + },
> + .probe = da9062_i2c_probe,
> + .remove = da9062_i2c_remove,
> + .id_table = da9062_i2c_id,
> +};
> +
> +module_i2c_driver(da9062_i2c_driver);
After looking at a few levels of #defines I think this is equivalent to
i2c_register_driver(NULL, da9062_i2c_driver);
for built-in code. Did I grep that right?
> +MODULE_DESCRIPTION("CORE device driver for Dialog DA9062");
> +MODULE_AUTHOR("S Twiss <stwiss.opensource@xxxxxxxxxxx>");
> +MODULE_LICENSE("GPL v2");
These macros will be effectively preprocessed away for built-in only
code.
Thanks,
Paul Bolle
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/