[PATCH v6 2/3] powerpc/powernv: Move cpuidle related code from setup.c to new file

From: Shreyas B. Prabhu
Date: Mon Apr 20 2015 - 01:03:44 EST


This is a cleanup patch; doesn't change any functionality. Moves
all cpuidle related code from setup.c to a new file.

Signed-off-by: Shreyas B. Prabhu <shreyas@xxxxxxxxxxxxxxxxxx>
Reviewed-by: Preeti U Murthy <preeti@xxxxxxxxxxxxxxxxxx>
---
arch/powerpc/platforms/powernv/Makefile | 2 +-
arch/powerpc/platforms/powernv/idle.c | 191 ++++++++++++++++++++++++++++++++
arch/powerpc/platforms/powernv/setup.c | 171 ----------------------------
3 files changed, 192 insertions(+), 172 deletions(-)
create mode 100644 arch/powerpc/platforms/powernv/idle.c

diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index 33e44f3..bee9235 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -1,4 +1,4 @@
-obj-y += setup.o opal-wrappers.o opal.o opal-async.o
+obj-y += setup.o opal-wrappers.o opal.o opal-async.o idle.o
obj-y += opal-rtc.o opal-nvram.o opal-lpc.o opal-flash.o
obj-y += rng.o opal-elog.o opal-dump.o opal-sysparam.o opal-sensor.o
obj-y += opal-msglog.o opal-hmi.o opal-power.o
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
new file mode 100644
index 0000000..104235a
--- /dev/null
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -0,0 +1,191 @@
+/*
+ * PowerNV cpuidle code
+ *
+ * Copyright 2015 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <asm/firmware.h>
+#include <asm/opal.h>
+#include <asm/cputhreads.h>
+#include <asm/cpuidle.h>
+#include <asm/code-patching.h>
+
+#include "powernv.h"
+#include "subcore.h"
+
+static u32 supported_cpuidle_states;
+
+int pnv_save_sprs_for_winkle(void)
+{
+ int cpu;
+ int rc;
+
+ /*
+ * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
+ * all cpus at boot. Get these reg values of current cpu and use the
+ * same accross all cpus.
+ */
+ uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
+ uint64_t hid0_val = mfspr(SPRN_HID0);
+ uint64_t hid1_val = mfspr(SPRN_HID1);
+ uint64_t hid4_val = mfspr(SPRN_HID4);
+ uint64_t hid5_val = mfspr(SPRN_HID5);
+ uint64_t hmeer_val = mfspr(SPRN_HMEER);
+
+ for_each_possible_cpu(cpu) {
+ uint64_t pir = get_hard_smp_processor_id(cpu);
+ uint64_t hsprg0_val = (uint64_t)&paca[cpu];
+
+ /*
+ * HSPRG0 is used to store the cpu's pointer to paca. Hence last
+ * 3 bits are guaranteed to be 0. Program slw to restore HSPRG0
+ * with 63rd bit set, so that when a thread wakes up at 0x100 we
+ * can use this bit to distinguish between fastsleep and
+ * deep winkle.
+ */
+ hsprg0_val |= 1;
+
+ rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
+ if (rc != 0)
+ return rc;
+
+ rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
+ if (rc != 0)
+ return rc;
+
+ /* HIDs are per core registers */
+ if (cpu_thread_in_core(cpu) == 0) {
+
+ rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
+ if (rc != 0)
+ return rc;
+
+ rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
+ if (rc != 0)
+ return rc;
+
+ rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
+ if (rc != 0)
+ return rc;
+
+ rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
+ if (rc != 0)
+ return rc;
+
+ rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
+ if (rc != 0)
+ return rc;
+ }
+ }
+
+ return 0;
+}
+
+static void pnv_alloc_idle_core_states(void)
+{
+ int i, j;
+ int nr_cores = cpu_nr_cores();
+ u32 *core_idle_state;
+
+ /*
+ * core_idle_state - First 8 bits track the idle state of each thread
+ * of the core. The 8th bit is the lock bit. Initially all thread bits
+ * are set. They are cleared when the thread enters deep idle state
+ * like sleep and winkle. Initially the lock bit is cleared.
+ * The lock bit has 2 purposes
+ * a. While the first thread is restoring core state, it prevents
+ * other threads in the core from switching to process context.
+ * b. While the last thread in the core is saving the core state, it
+ * prevents a different thread from waking up.
+ */
+ for (i = 0; i < nr_cores; i++) {
+ int first_cpu = i * threads_per_core;
+ int node = cpu_to_node(first_cpu);
+
+ core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
+ *core_idle_state = PNV_CORE_IDLE_THREAD_BITS;
+
+ for (j = 0; j < threads_per_core; j++) {
+ int cpu = first_cpu + j;
+
+ paca[cpu].core_idle_state_ptr = core_idle_state;
+ paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
+ paca[cpu].thread_mask = 1 << j;
+ }
+ }
+
+ update_subcore_sibling_mask();
+
+ if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED)
+ pnv_save_sprs_for_winkle();
+}
+
+u32 pnv_get_supported_cpuidle_states(void)
+{
+ return supported_cpuidle_states;
+}
+EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
+
+static int __init pnv_init_idle_states(void)
+{
+ struct device_node *power_mgt;
+ int dt_idle_states;
+ u32 *flags;
+ int i;
+
+ supported_cpuidle_states = 0;
+
+ if (cpuidle_disable != IDLE_NO_OVERRIDE)
+ goto out;
+
+ if (!firmware_has_feature(FW_FEATURE_OPALv3))
+ goto out;
+
+ power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
+ if (!power_mgt) {
+ pr_warn("opal: PowerMgmt Node not found\n");
+ goto out;
+ }
+ dt_idle_states = of_property_count_u32_elems(power_mgt,
+ "ibm,cpu-idle-state-flags");
+ if (dt_idle_states < 0) {
+ pr_warn("cpuidle-powernv: no idle states found in the DT\n");
+ goto out;
+ }
+
+ flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
+ if (of_property_read_u32_array(power_mgt,
+ "ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
+ pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
+ goto out_free;
+ }
+
+ for (i = 0; i < dt_idle_states; i++)
+ supported_cpuidle_states |= flags[i];
+
+ if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
+ patch_instruction(
+ (unsigned int *)pnv_fastsleep_workaround_at_entry,
+ PPC_INST_NOP);
+ patch_instruction(
+ (unsigned int *)pnv_fastsleep_workaround_at_exit,
+ PPC_INST_NOP);
+ }
+ pnv_alloc_idle_core_states();
+out_free:
+ kfree(flags);
+out:
+ return 0;
+}
+
+subsys_initcall(pnv_init_idle_states);
diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c
index 16fdcb2..509cdd2 100644
--- a/arch/powerpc/platforms/powernv/setup.c
+++ b/arch/powerpc/platforms/powernv/setup.c
@@ -35,12 +35,8 @@
#include <asm/opal.h>
#include <asm/kexec.h>
#include <asm/smp.h>
-#include <asm/cputhreads.h>
-#include <asm/cpuidle.h>
-#include <asm/code-patching.h>

#include "powernv.h"
-#include "subcore.h"

static void __init pnv_setup_arch(void)
{
@@ -277,173 +273,6 @@ static void __init pnv_setup_machdep_opal(void)
ppc_md.handle_hmi_exception = opal_handle_hmi_exception;
}

-static u32 supported_cpuidle_states;
-
-int pnv_save_sprs_for_winkle(void)
-{
- int cpu;
- int rc;
-
- /*
- * hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric accross
- * all cpus at boot. Get these reg values of current cpu and use the
- * same accross all cpus.
- */
- uint64_t lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
- uint64_t hid0_val = mfspr(SPRN_HID0);
- uint64_t hid1_val = mfspr(SPRN_HID1);
- uint64_t hid4_val = mfspr(SPRN_HID4);
- uint64_t hid5_val = mfspr(SPRN_HID5);
- uint64_t hmeer_val = mfspr(SPRN_HMEER);
-
- for_each_possible_cpu(cpu) {
- uint64_t pir = get_hard_smp_processor_id(cpu);
- uint64_t hsprg0_val = (uint64_t)&paca[cpu];
-
- /*
- * HSPRG0 is used to store the cpu's pointer to paca. Hence last
- * 3 bits are guaranteed to be 0. Program slw to restore HSPRG0
- * with 63rd bit set, so that when a thread wakes up at 0x100 we
- * can use this bit to distinguish between fastsleep and
- * deep winkle.
- */
- hsprg0_val |= 1;
-
- rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
- if (rc != 0)
- return rc;
-
- rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
- if (rc != 0)
- return rc;
-
- /* HIDs are per core registers */
- if (cpu_thread_in_core(cpu) == 0) {
-
- rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
- if (rc != 0)
- return rc;
-
- rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
- if (rc != 0)
- return rc;
-
- rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
- if (rc != 0)
- return rc;
-
- rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
- if (rc != 0)
- return rc;
-
- rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
- if (rc != 0)
- return rc;
- }
- }
-
- return 0;
-}
-
-static void pnv_alloc_idle_core_states(void)
-{
- int i, j;
- int nr_cores = cpu_nr_cores();
- u32 *core_idle_state;
-
- /*
- * core_idle_state - First 8 bits track the idle state of each thread
- * of the core. The 8th bit is the lock bit. Initially all thread bits
- * are set. They are cleared when the thread enters deep idle state
- * like sleep and winkle. Initially the lock bit is cleared.
- * The lock bit has 2 purposes
- * a. While the first thread is restoring core state, it prevents
- * other threads in the core from switching to process context.
- * b. While the last thread in the core is saving the core state, it
- * prevents a different thread from waking up.
- */
- for (i = 0; i < nr_cores; i++) {
- int first_cpu = i * threads_per_core;
- int node = cpu_to_node(first_cpu);
-
- core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
- *core_idle_state = PNV_CORE_IDLE_THREAD_BITS;
-
- for (j = 0; j < threads_per_core; j++) {
- int cpu = first_cpu + j;
-
- paca[cpu].core_idle_state_ptr = core_idle_state;
- paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
- paca[cpu].thread_mask = 1 << j;
- }
- }
-
- update_subcore_sibling_mask();
-
- if (supported_cpuidle_states & OPAL_PM_WINKLE_ENABLED)
- pnv_save_sprs_for_winkle();
-}
-
-u32 pnv_get_supported_cpuidle_states(void)
-{
- return supported_cpuidle_states;
-}
-EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
-
-static int __init pnv_init_idle_states(void)
-{
- struct device_node *power_mgt;
- int dt_idle_states;
- u32 *flags;
- int i;
-
- supported_cpuidle_states = 0;
-
- if (cpuidle_disable != IDLE_NO_OVERRIDE)
- goto out;
-
- if (!firmware_has_feature(FW_FEATURE_OPALv3))
- goto out;
-
- power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
- if (!power_mgt) {
- pr_warn("opal: PowerMgmt Node not found\n");
- goto out;
- }
- dt_idle_states = of_property_count_u32_elems(power_mgt,
- "ibm,cpu-idle-state-flags");
- if (dt_idle_states < 0) {
- pr_warn("cpuidle-powernv: no idle states found in the DT\n");
- goto out;
- }
-
- flags = kzalloc(sizeof(*flags) * dt_idle_states, GFP_KERNEL);
- if (of_property_read_u32_array(power_mgt,
- "ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
- pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
- goto out_free;
- }
-
- for (i = 0; i < dt_idle_states; i++)
- supported_cpuidle_states |= flags[i];
-
- if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
- patch_instruction(
- (unsigned int *)pnv_fastsleep_workaround_at_entry,
- PPC_INST_NOP);
- patch_instruction(
- (unsigned int *)pnv_fastsleep_workaround_at_exit,
- PPC_INST_NOP);
- }
- pnv_alloc_idle_core_states();
-out_free:
- kfree(flags);
-out:
- return 0;
-}
-
-subsys_initcall(pnv_init_idle_states);
-
static int __init pnv_probe(void)
{
unsigned long root = of_get_flat_dt_root();
--
1.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/