Re: [PATCH 0/2] powerpc/kvm: Enable running guests on RT Linux

[Scott Wood]

On Mon, 2015-04-20 at 13:53 +0300, Purcareata Bogdan wrote:
> On 10.04.2015 02:53, Scott Wood wrote:
> > On Thu, 2015-04-09 at 10:44 +0300, Purcareata Bogdan wrote:
> >> So at this point I was getting kinda frustrated so I decided to measure
> >> the time spend in kvm_mpic_write and kvm_mpic_read. I assumed these were
> >> the main entry points in the in-kernel MPIC and were basically executed
> >> while holding the spinlock. The scenario was the same - 24 VCPUs guest,
> >> with 24 virtio+vhost interfaces, only this time I ran 24 ping flood
> >> threads to another board instead of netperf. I assumed this would impose
> >> a heavier stress.
> >>
> >> The latencies look pretty ok, around 1-2 us on average, with the max
> >> shown below:
> >>
> >> .kvm_mpic_read	14.560
> >> .kvm_mpic_write	12.608
> >>
> >> Those are also microseconds. This was run for about 15 mins.
> >
> > What about other entry points such as kvm_set_msi() and
> > kvmppc_mpic_set_epr()?
> 
> Thanks for the pointers! I redid the measurements, this time for the functions 
> run with the openpic lock down:
> 
> .kvm_mpic_read_internal (.kvm_mpic_read)	1.664
> .kvmppc_mpic_set_epr				6.880
> .kvm_mpic_write_internal (.kvm_mpic_write)	7.840
> .openpic_msi_write (.kvm_set_msi)		10.560
> 
> Same scenario, 15 mins, numbers are microseconds.
> 
> There was a weird situation for .kvmppc_mpic_set_epr - its corresponding inner 
> function is kvmppc_set_epr, which is a static inline. Removing the static inline 
> yields a compiler crash (Segmentation fault (core dumped) - 
> scripts/Makefile.build:441: recipe for target 'arch/powerpc/kvm/kvm.o' failed), 
> but that's a different story, so I just let it be for now. Point is the time may 
> include other work after the lock has been released, but before the function 
> actually returned. I noticed this was the case for .kvm_set_msi, which could 
> work up to 90 ms, not actually under the lock. This made me change what I'm 
> looking at.

kvm_set_msi does pretty much nothing outside the lock -- I suspect
you're measuring an interrupt that happened as soon as the lock was
released.

> So far it looks pretty decent. Are there any other MPIC entry points worthy of 
> investigation?

I don't think so.

>  Or perhaps a different stress scenario involving a lot of VCPUs 
> and external interrupts?

You could instrument the MPIC code to find out how many loop iterations
you maxed out on, and compare that to the theoretical maximum.

-Scott


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/