Re: [PATCH] clk: tegra: Fix comments for structure definitions

[Peter De Schrijver]

On Mon, Apr 13, 2015 at 12:38:17PM -0400, Rhyland Klein wrote:
> Some fields moved from the tegra_clk_pll struct to
> the tegra_pll_params struct. Update the struct comments
> to reflect where the fields really are.
> 

Acked-By: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>

> Signed-off-by: Rhyland Klein <rklein@xxxxxxxxxx>
> ---
>  drivers/clk/tegra/clk.h |   74 +++++++++++++++++++++++------------------------
>  1 file changed, 37 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
> index 751a97966354..4eae99a4f32e 100644
> --- a/drivers/clk/tegra/clk.h
> +++ b/drivers/clk/tegra/clk.h
> @@ -171,6 +171,30 @@ struct div_nmp {
>   * @lock_bit_idx:		Bit index for PLL lock status
>   * @lock_enable_bit_idx:	Bit index to enable PLL lock
>   * @lock_delay:			Delay in us if PLL lock is not used
> + * @freq_table:			array of frequencies supported by PLL
> + * @fixed_rate:			PLL rate if it is fixed
> + * @flags:			PLL flags
> + *
> + * Flags:
> + * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
> + *     PLL locking. If not set it will use lock_delay value to wait.
> + * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
> + *     to be programmed to change output frequency of the PLL.
> + * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
> + *     to be programmed to change output frequency of the PLL.
> + * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
> + *     to be programmed to change output frequency of the PLL.
> + * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
> + *     that it is PLLU and invert post divider value.
> + * TEGRA_PLLM - PLLM has additional override settings in PMC. This
> + *     flag indicates that it is PLLM and use override settings.
> + * TEGRA_PLL_FIXED - We are not supposed to change output frequency
> + *     of some plls.
> + * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
> + * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
> + *     base register.
> + * TEGRA_PLL_BYPASS - PLL has bypass bit
> + * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
>   */
>  struct tegra_clk_pll_params {
>  	unsigned long	input_min;
> @@ -203,38 +227,26 @@ struct tegra_clk_pll_params {
>  	unsigned long	fixed_rate;
>  };
>  
> +#define TEGRA_PLL_USE_LOCK BIT(0)
> +#define TEGRA_PLL_HAS_CPCON BIT(1)
> +#define TEGRA_PLL_SET_LFCON BIT(2)
> +#define TEGRA_PLL_SET_DCCON BIT(3)
> +#define TEGRA_PLLU BIT(4)
> +#define TEGRA_PLLM BIT(5)
> +#define TEGRA_PLL_FIXED BIT(6)
> +#define TEGRA_PLLE_CONFIGURE BIT(7)
> +#define TEGRA_PLL_LOCK_MISC BIT(8)
> +#define TEGRA_PLL_BYPASS BIT(9)
> +#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
> +
>  /**
>   * struct tegra_clk_pll - Tegra PLL clock
>   *
>   * @hw:		handle between common and hardware-specifix interfaces
>   * @clk_base:	address of CAR controller
>   * @pmc:	address of PMC, required to read override bits
> - * @freq_table:	array of frequencies supported by PLL
> - * @params:	PLL parameters
> - * @flags:	PLL flags
> - * @fixed_rate:	PLL rate if it is fixed
>   * @lock:	register lock
> - *
> - * Flags:
> - * TEGRA_PLL_USE_LOCK - This flag indicated to use lock bits for
> - *     PLL locking. If not set it will use lock_delay value to wait.
> - * TEGRA_PLL_HAS_CPCON - This flag indicates that CPCON value needs
> - *     to be programmed to change output frequency of the PLL.
> - * TEGRA_PLL_SET_LFCON - This flag indicates that LFCON value needs
> - *     to be programmed to change output frequency of the PLL.
> - * TEGRA_PLL_SET_DCCON - This flag indicates that DCCON value needs
> - *     to be programmed to change output frequency of the PLL.
> - * TEGRA_PLLU - PLLU has inverted post divider. This flags indicated
> - *     that it is PLLU and invert post divider value.
> - * TEGRA_PLLM - PLLM has additional override settings in PMC. This
> - *     flag indicates that it is PLLM and use override settings.
> - * TEGRA_PLL_FIXED - We are not supposed to change output frequency
> - *     of some plls.
> - * TEGRA_PLLE_CONFIGURE - Configure PLLE when enabling.
> - * TEGRA_PLL_LOCK_MISC - Lock bit is in the misc register instead of the
> - *     base register.
> - * TEGRA_PLL_BYPASS - PLL has bypass bit
> - * TEGRA_PLL_HAS_LOCK_ENABLE - PLL has bit to enable lock monitoring
> + * @params:	PLL parameters
>   */
>  struct tegra_clk_pll {
>  	struct clk_hw	hw;
> @@ -246,18 +258,6 @@ struct tegra_clk_pll {
>  
>  #define to_clk_pll(_hw) container_of(_hw, struct tegra_clk_pll, hw)
>  
> -#define TEGRA_PLL_USE_LOCK BIT(0)
> -#define TEGRA_PLL_HAS_CPCON BIT(1)
> -#define TEGRA_PLL_SET_LFCON BIT(2)
> -#define TEGRA_PLL_SET_DCCON BIT(3)
> -#define TEGRA_PLLU BIT(4)
> -#define TEGRA_PLLM BIT(5)
> -#define TEGRA_PLL_FIXED BIT(6)
> -#define TEGRA_PLLE_CONFIGURE BIT(7)
> -#define TEGRA_PLL_LOCK_MISC BIT(8)
> -#define TEGRA_PLL_BYPASS BIT(9)
> -#define TEGRA_PLL_HAS_LOCK_ENABLE BIT(10)
> -
>  extern const struct clk_ops tegra_clk_pll_ops;
>  extern const struct clk_ops tegra_clk_plle_ops;
>  struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/