Re: [RFC][PATCH v2 00/13] USB: OTG/DRD Core functionality

[Peter Chen]

On Wed, Apr 22, 2015 at 03:42:32PM +0300, Roger Quadros wrote:
> > So we will have a separate drd fsm file, and the CONFIG_USB_OTG
> > and CONFIG_USB_OTG_FSM are not needed to be defined, right?
> > 
> 
> for drd case CONFIG_USB_OTG_FSM is definitely not needed.
> I'm not sure if we can operate dual-role without CONFIG_USB_OTG.
> I was thinking of combining the OTG core functionality (drivers/usb/common/usb-otg.c)
> with CONFIG_USB_OTG.
> 

Ok, let's choose CONFIG_USB_OTG for both drd and usb fsm case.
And we need to patch for hcd that only hnp supported hcd needs
to request otg descriptor, etc.

For yesterday's back-compatible old otg device, we can add otg
features to these drivers, the current behavior for these drivers
is: if CONFIG_USB_OTG is defined, it is an otg device, we can just
keep the behavior unchanging. If these drivers need to use OTG framework
in future, it needs to update its platform data or dts.

So, I prefer:

- For switching the role through the ID pin devices, we doesn't need any otg
features, so no otg dts properties are needed.(expect dr_mode = "otg")
- For adp/srp/hnp supported devices, we need (partial) otg features, and
the fsm (hardware or software) are needed, we need some otg dts
properties we discussed before.


> > 
> > static const struct usb_descriptor_header *otg_desc_20[] = {
> > 	(struct usb_descriptor_header *) &(struct usb_otg_descriptor_20){
> > 		.bLength =		sizeof(struct usb_otg_descriptor_20),
> > 		.bDescriptorType =	USB_DT_OTG,
> > 
> > 		/*
> > 		 * REVISIT SRP-only hardware is possible, although
> > 		 * it would not be called "OTG" ...
> > 		 */
> > 		.bmAttributes =		USB_OTG_SRP | USB_OTG_HNP,
> > 		.bcdOTG =               cpu_to_le16(0x0200),
> > 	},
> > 	NULL,
> > };
> 
> instead of hardcoding bmAttributes field, it must be obtained from the
> appropriate data structure that was set by the controller driver
> by reading DT and OTG hardware info.
> 
> > 
> > During bind process:
> > 
> > 	if (gadget_is_otg_13(c->cdev->gadget))
> > 		c->descriptors = otg_desc_13;
> > 	else if (gadget_is_otg_20(c->cdev->gadget))
> > 		c->descriptors = otg_desc_20;
> 
> Probably a helper utitily can do the necessary checks and build the
> otg descriptor for us.
> 		usb_otg_get_descriptor(c->descriptors);
> 
> e.g. for OTG3.0 we have a new flag USB_OTG_RSP, and this helper
> can be upgraded in the future.

ok, it is the implementation detail.

-- 

Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/