Re: [V8 PATCH 0/3] Introduce ACPI support for ahci_platform driver

[Suthikulpanit, Suravee]

Mika/Rafael, 

If there are no other concerns about this patch series, do you think this
ready to be pushed to linux-next tree along with the rest of the ARM64
ACPI patch series from Linaro?

Thanks,

Suravee

On 4/6/15, 10:45, "Suravee Suthikulanit" <suravee.suthikulpanit@xxxxxxx>
wrote:

>Ping.
>
>Are there any other concerns for this patch series?
>
>Thanks,
>
>Suravee
>
>On 3/30/2015 4:56 PM, Suravee Suthikulpanit wrote:
>> This patch series introduce ACPI support for AHCI platform driver.
>> Existing ACPI support for AHCI assumes the device controller is a PCI
>>device.
>> Since there is no ACPI _CID for generic AHCI controller, the driver
>> could not use it for matching devices. Therefore, this patch introduces
>> a mechanism for drivers to match devices using ACPI _CLS method.
>> _CLS contains PCI-defined class-code.
>>
>> This patch series also modifies ACPI modalias to add class-code to the
>> exisiting format, which currently only uses _HID and _CIDs. This is
>>required
>> to support loadable modules w/ _CLS.
>>
>> This is rebased from and tested with:
>>
>>      http://git.linaro.org/leg/acpi/acpi.git acpi-5.1-v11
>>
>> This topic was discussed earlier here (as part of introducing support
>>for
>> AMD Seattle SATA controller):
>>
>>      http://marc.info/?l=linux-arm-kernel&m=141083492521584&w=2
>>
>> Changes from V7 (https://lkml.org/lkml/2015/3/26/592)
>> 	* [1/3] Return AE_AML_OPERAND_TYPE when _CLS package containing
>> 	  invalid type (per Robert Moore suggestion).
>> 	* [2/3] Fixed build error due missing ACPI_DEVICE_CLASS definition
>> 	  when disabling ACPI.
>>
>> Changes from V6 (https://lkml.org/lkml/2015/3/25/797)
>> 	* Adding Acked-by Mika, and Reviewed-by Hanjun
>> 	* Minor clen up to use lower case 0xffffff for cls_msk
>> 	  (per Mika suggestions).
>> 	* Modify the ACPI_DEVICE_CLASS macro to use designated initializer
>> 	  (per Mika suggestions).
>>
>> Changes from V5 (https://lkml.org/lkml/2015/3/6/24)
>> 	* Rebased and tested with acpi-5.1-v11
>> 	* Splitting up the ACPICA changes into a separate patch [1/3].
>> 	  (per Mika suggestion)
>> 	* Adding class-code mask support (per Mika suggestion)
>> 	* Use macro to define struct acpi_device_id entry (per Mika suggestion)
>> 	* Note: Mika also recommend reordering the member of struct
>>acpi_device_id
>> 	  and define a macro to be used for declaring each table entry. This
>>is a
>> 	  large amount of changes, and will be done separtely from this patch
>>series.
>>
>> Changes from V4 (https://lkml.org/lkml/2015/3/2/56)
>> 	* [1/2] Bug fixed: Reorder the declaration of
>> 	  struct acpi_pnp_device_id cls in the struct acpi_device_info
>> 	  (include/acpi/actypes.h) since compatible_id_list must be last one.
>> 	* [2/2] Added Acked-by: Tejun Heo <tj@xxxxxxxxxx>
>>
>> Changes from V3 (https://lkml.org/lkml/2015/2/8/106)
>> 	* Instead of introducing new structure acpi_device_cls, add cls into
>> 	  the acpi_device_id, and modify the __acpi_match_device
>> 	  to also match for cls. (per Mika suggestion.)
>> 	* Add loadable module support, which requires changes in ACPI
>> 	  modalias. (per Mika suggestion.)
>> 	* Rebased and tested with acpi-5.1-v9
>>
>> Changes from V2 (https://lkml.org/lkml/2015/1/5/662)
>> 	* Update with review comment from Rafael in patch 1/2
>> 	* Rebased and tested with acpi-5.1-v8
>>
>> Changes from V1 (https://lkml.org/lkml/2014/12/19/345)
>> 	* Rebased to 3.19.0-rc2
>> 	* Change from acpi_cls in device_driver to acpi_match_cls (Hanjun
>>comment)
>> 	* Change the matching logic in acpi_driver_match_device() due to the
>>new
>> 	  special PRP0001 _HID.
>> 	* Simplify the return type of acpi_match_device_cls() to boolean.
>>
>> Changes from RFC (https://lkml.org/lkml/2014/12/17/446)
>> 	* Remove #ifdef and make non-ACPI version of the acpi_match_device_cls
>> 	  as inline. (per Arnd)
>> 	* Simplify logic to retrieve and evaluate _CLS handle. (per Hanjun)
>>
>> Suravee Suthikulpanit (3):
>>    ACPICA: Add ACPI _CLS processing
>>    ACPI / scan: Add support for ACPI _CLS device matching
>>    ata: ahci_platform: Add ACPI _CLS matching
>>
>>   drivers/acpi/acpica/acutils.h     |  3 ++
>>   drivers/acpi/acpica/nsxfname.c    | 21 +++++++++--
>>   drivers/acpi/acpica/utids.c       | 73
>>+++++++++++++++++++++++++++++++++++++++
>>   drivers/acpi/scan.c               | 36 ++++++++++++++++---
>>   drivers/ata/Kconfig               |  2 +-
>>   drivers/ata/ahci_platform.c       |  9 +++++
>>   include/acpi/acnames.h            |  1 +
>>   include/acpi/actypes.h            |  4 ++-
>>   include/linux/acpi.h              | 14 ++++++++
>>   include/linux/mod_devicetable.h   |  2 ++
>>   scripts/mod/devicetable-offsets.c |  2 ++
>>   scripts/mod/file2alias.c          | 32 +++++++++++++++--
>>   12 files changed, 189 insertions(+), 10 deletions(-)
>>
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/