[PATCH 06/21] ARCNET: com20020: remove unneeded macros
From: Michael Grzeschik
Date: Fri Apr 24 2015 - 13:23:01 EST
The macros SET_SUBADR, ARCRESET, ARCRESET0, ACOMMAND, ASTATUS, AINTMASK
and ADIAGSTATUS are unnecessary indirections to the use of registers.
This patch removes them and improves the readability of the code.
Signed-off-by: Michael Grzeschik <m.grzeschik@xxxxxxxxxxxxxx>
---
drivers/net/arcnet/com20020-isa.c | 2 +-
drivers/net/arcnet/com20020-pci.c | 2 +-
drivers/net/arcnet/com20020.c | 56 ++++++++++++++++++++++-----------------
include/linux/com20020.h | 33 -----------------------
4 files changed, 34 insertions(+), 59 deletions(-)
diff --git a/drivers/net/arcnet/com20020-isa.c b/drivers/net/arcnet/com20020-isa.c
index d8746ca..c674511 100644
--- a/drivers/net/arcnet/com20020-isa.c
+++ b/drivers/net/arcnet/com20020-isa.c
@@ -68,7 +68,7 @@ static int __init com20020isa_probe(struct net_device *dev)
ioaddr, ioaddr + ARCNET_TOTAL_SIZE - 1);
return -ENXIO;
}
- if (ASTATUS() == 0xFF) {
+ if (inb(_STATUS) == 0xFF) {
BUGMSG(D_NORMAL, "IO address %x empty\n", ioaddr);
err = -ENODEV;
goto out;
diff --git a/drivers/net/arcnet/com20020-pci.c b/drivers/net/arcnet/com20020-pci.c
index 9fa4eee..18c0b1f 100644
--- a/drivers/net/arcnet/com20020-pci.c
+++ b/drivers/net/arcnet/com20020-pci.c
@@ -132,7 +132,7 @@ static int com20020pci_probe(struct pci_dev *pdev, const struct pci_device_id *i
lp->timeout = timeout;
lp->hw.owner = THIS_MODULE;
- if (ASTATUS() == 0xFF) {
+ if (inb(_STATUS) == 0xFF) {
pr_err("IO address %Xh is empty!\n", ioaddr);
ret = -EIO;
goto out_port;
diff --git a/drivers/net/arcnet/com20020.c b/drivers/net/arcnet/com20020.c
index 0d84f6c..ed0cdd3 100644
--- a/drivers/net/arcnet/com20020.c
+++ b/drivers/net/arcnet/com20020.c
@@ -91,7 +91,10 @@ int com20020_check(struct net_device *dev)
int ioaddr = dev->base_addr, status;
struct arcnet_local *lp = netdev_priv(dev);
- ARCRESET0;
+ /* reset the card */
+ outb(0x18 | 0x80, _CONFIG);
+ udelay(5);
+ outb(0x18, _CONFIG);
mdelay(RESETtime);
lp->setup = lp->clockm ? 0 : (lp->clockp << 1);
@@ -101,12 +104,13 @@ int com20020_check(struct net_device *dev)
/* Enable P1Mode for backplane mode */
lp->setup = lp->setup | P1MODE;
- SET_SUBADR(SUB_SETUP1);
+ lp->config = (lp->config & ~0x03) | SUB_SETUP1;
+ outb(lp->config, _CONFIG);
outb(lp->setup, _XREG);
if (lp->clockm != 0)
{
- SET_SUBADR(SUB_SETUP2);
+ outb(SUB_SETUP2, _SUBADR);
outb(lp->setup2, _XREG);
/* must now write the magic "restart operation" command */
@@ -116,10 +120,10 @@ int com20020_check(struct net_device *dev)
lp->config = 0x21 | (lp->timeout << 3) | (lp->backplane << 2);
/* set node ID to 0x42 (but transmitter is disabled, so it's okay) */
- SETCONF;
+ outb(lp->config, _CONFIG);
outb(0x42, ioaddr + BUS_ALIGN*7);
- status = ASTATUS();
+ status = inb(_STATUS);
if ((status & 0x99) != (NORXflag | TXFREEflag | RESETflag)) {
BUGMSG(D_NORMAL, "status invalid (%Xh).\n", status);
@@ -131,9 +135,9 @@ int com20020_check(struct net_device *dev)
outb(0x39, _CONFIG);
outb(inb(ioaddr + BUS_ALIGN*8), ioaddr + BUS_ALIGN*7);
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+ outb((CFLAGScmd | RESETclear | CONFIGclear), _COMMAND);
- status = ASTATUS();
+ status = inb(_STATUS);
BUGMSG(D_INIT_REASONS, "status after reset acknowledged: %X\n",
status);
@@ -156,7 +160,8 @@ static int com20020_set_hwaddr(struct net_device *dev, void *addr)
struct sockaddr *hwaddr = addr;
memcpy(dev->dev_addr, hwaddr->sa_data, 1);
- SET_SUBADR(SUB_NODE);
+ lp->config = (lp->config & ~0x03) | SUB_NODE;
+ outb(lp->config, _CONFIG);
outb(dev->dev_addr[0], _XREG);
return 0;
@@ -195,12 +200,13 @@ int com20020_found(struct net_device *dev, int shared)
if (!dev->dev_addr[0])
dev->dev_addr[0] = inb(ioaddr + BUS_ALIGN*8); /* FIXME: do this some other way! */
- SET_SUBADR(SUB_SETUP1);
+ lp->config = (lp->config & ~0x03) | SUB_SETUP1;
+ outb(lp->config, _CONFIG);
outb(lp->setup, _XREG);
if (lp->card_flags & ARC_CAN_10MBIT)
{
- SET_SUBADR(SUB_SETUP2);
+ outb(SUB_SETUP2, _SUBADR);
outb(lp->setup2, _XREG);
/* must now write the magic "restart operation" command */
@@ -210,7 +216,7 @@ int com20020_found(struct net_device *dev, int shared)
lp->config = 0x20 | (lp->timeout << 3) | (lp->backplane << 2) | 1;
/* Default 0x38 + register: Node ID */
- SETCONF;
+ outb(lp->config, _CONFIG);
outb(dev->dev_addr[0], _XREG);
/* reserve the irq */
@@ -259,22 +265,24 @@ static int com20020_reset(struct net_device *dev, int really_reset)
BUGMSG(D_DEBUG, "%s: %d: %s: dev: %p, lp: %p, dev->name: %s\n",
__FILE__,__LINE__,__func__,dev,lp,dev->name);
BUGMSG(D_INIT, "Resetting %s (status=%02Xh)\n",
- dev->name, ASTATUS());
+ dev->name, inb(_STATUS));
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
lp->config = TXENcfg | (lp->timeout << 3) | (lp->backplane << 2);
/* power-up defaults */
- SETCONF;
+ outb(lp->config, _CONFIG);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
if (really_reset) {
/* reset the card */
- ARCRESET;
+ outb(lp->config | 0x80, _CONFIG);
+ udelay(5);
+ outb(lp->config, _CONFIG);
mdelay(RESETtime * 2); /* COM20020 seems to be slower sometimes */
}
/* clear flags & end reset */
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
- ACOMMAND(CFLAGScmd | RESETclear | CONFIGclear);
+ outb((CFLAGScmd | RESETclear | CONFIGclear), _COMMAND);
/* verify that the ARCnet signature byte is present */
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
@@ -287,26 +295,24 @@ static int com20020_reset(struct net_device *dev, int really_reset)
return 1;
}
/* enable extended (512-byte) packets */
- ACOMMAND(CONFIGcmd | EXTconf);
+ outb((CONFIGcmd | EXTconf), _COMMAND);
BUGMSG(D_DEBUG, "%s: %d: %s\n",__FILE__,__LINE__,__func__);
/* done! return success. */
return 0;
}
-
static void com20020_setmask(struct net_device *dev, int mask)
{
u_int ioaddr = dev->base_addr;
BUGMSG(D_DURING, "Setting mask to %x at %x\n",mask,ioaddr);
- AINTMASK(mask);
+ outb((mask), _INTMASK);
}
-
static void com20020_command(struct net_device *dev, int cmd)
{
u_int ioaddr = dev->base_addr;
- ACOMMAND(cmd);
+ outb(cmd, _COMMAND);
}
@@ -314,7 +320,7 @@ static int com20020_status(struct net_device *dev)
{
u_int ioaddr = dev->base_addr;
- return ASTATUS() + (ADIAGSTATUS()<<8);
+ return inb(_STATUS) + (inb(_DIAGSTAT) << 8);
}
static void com20020_close(struct net_device *dev)
@@ -324,7 +330,7 @@ static void com20020_close(struct net_device *dev)
/* disable transmitter */
lp->config &= ~TXENcfg;
- SETCONF;
+ outb(lp->config, _CONFIG);
}
/* Set or clear the multicast filter for this adaptor.
@@ -342,7 +348,8 @@ static void com20020_set_mc_list(struct net_device *dev)
if ((dev->flags & IFF_PROMISC) && (dev->flags & IFF_UP)) { /* Enable promiscuous mode */
if (!(lp->setup & PROMISCset))
BUGMSG(D_NORMAL, "Setting promiscuous flag...\n");
- SET_SUBADR(SUB_SETUP1);
+ lp->config = (lp->config & ~0x03) | SUB_SETUP1;
+ outb(lp->config, _CONFIG);
lp->setup |= PROMISCset;
outb(lp->setup, _XREG);
} else
@@ -350,7 +357,8 @@ static void com20020_set_mc_list(struct net_device *dev)
{
if ((lp->setup & PROMISCset))
BUGMSG(D_NORMAL, "Resetting promiscuous flag...\n");
- SET_SUBADR(SUB_SETUP1);
+ lp->config = (lp->config & ~0x03) | SUB_SETUP1;
+ outb(lp->config, _CONFIG);
lp->setup &= ~PROMISCset;
outb(lp->setup, _XREG);
}
diff --git a/include/linux/com20020.h b/include/linux/com20020.h
index 5ce5c7d..2aaa57d 100644
--- a/include/linux/com20020.h
+++ b/include/linux/com20020.h
@@ -109,37 +109,4 @@ struct com20020_dev {
#define SUB_BUSCTL 5 /* bus control options */
#define SUB_DMACOUNT 6 /* DMA count options */
-#define SET_SUBADR(x) do { \
- if ((x) < 4) \
- { \
- lp->config = (lp->config & ~0x03) | (x); \
- SETCONF; \
- } \
- else \
- { \
- outb(x, _SUBADR); \
- } \
-} while (0)
-
-#undef ARCRESET
-#undef ASTATUS
-#undef ACOMMAND
-#undef AINTMASK
-
-#define ARCRESET { outb(lp->config | 0x80, _CONFIG); \
- udelay(5); \
- outb(lp->config , _CONFIG); \
- }
-#define ARCRESET0 { outb(0x18 | 0x80, _CONFIG); \
- udelay(5); \
- outb(0x18 , _CONFIG); \
- }
-
-#define ASTATUS() inb(_STATUS)
-#define ADIAGSTATUS() inb(_DIAGSTAT)
-#define ACOMMAND(cmd) outb((cmd),_COMMAND)
-#define AINTMASK(msk) outb((msk),_INTMASK)
-
-#define SETCONF outb(lp->config, _CONFIG)
-
#endif /* __COM20020_H */
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/