Re: [PATCH v2 2/4] iio: magn: bmc150_magn: Add devicetree binding documentation

[Jonathan Cameron]

On 23/04/15 19:34, Irina Tirdea wrote:
> Add binding documentation for Bosch BMC150 magnetometer.
> 
> Signed-off-by: Irina Tirdea <irina.tirdea@xxxxxxxxx>
This is trivial enough that I'll happily take it once the 3 weeks from first
posting are up (I'm guessing that still applies to device tree bindings).
> ---
>  .../bindings/iio/magnetometer/bmc150_magn.txt      | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> new file mode 100644
> index 0000000..9f263b7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/magnetometer/bmc150_magn.txt
> @@ -0,0 +1,22 @@
> +* Bosch BMC150 magnetometer sensor
> +
> +http://ae-bst.resource.bosch.com/media/products/dokumente/bmc150/BST-BMC150-DS000-04.pdf
> +
> +Required properties:
> +
> +  - compatible : should be "bosch,bmc150_magn"
> +  - reg : the I2C address of the magnetometer
> +
> +Optional properties:
> +
> +  - interrupt-parent : phandle to the parent interrupt controller
> +  - interrupts : interrupt mapping for GPIO IRQ
> +
> +Example:
> +
> +bmc150_magn@12 {
> +        compatible = "bosch,bmc150_magn";
> +        reg = <0x12>;
> +        interrupt-parent = <&gpio1>;
> +        interrupts = <0 1>;
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/