Re: [PATCH v2] thermal: exynos: Add the support for Exynos5433 TMU
From: Chanwoo Choi
Date: Sun Apr 26 2015 - 22:20:33 EST
Hi Eduardo and Lukasz,
I checked this patch merged on linux-next.git.
But, this patch is not merged on Linux 4.1-rc1.
Thanks,
Chanwoo Choi
On 03/18/2015 04:39 PM, Lukasz Majewski wrote:
> Hi Chanwoo,
>
>> Hi Lukasz,
>>
>> Genlty Ping.
>
> I've got your patches at the back of my head :-)
>
> I will try to review them today or tomorrow.
>
>>
>> Best Regards,
>> Chanwoo Choi
>>
>> On 03/10/2015 11:23 AM, Chanwoo Choi wrote:
>>> This patch adds the support for Exynos5433's TMU (Thermal
>>> Management Unit). Exynos5433 has a little different register bit
>>> fields as following description:
>>> - Support the eight trip points for rising/falling interrupt by
>>> using two registers
>>> - Read the calibration type (1-point or 2-point) and sensor id from
>>> TRIMINFO register
>>> - Use a little different register address
>>>
>>> Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
>>> Cc: Eduardo Valentin <edubezval@xxxxxxxxx>
>>> Cc: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
>>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>>> ---
>>> Changes from v1:
>>> (https://lkml.org/lkml/2015/2/26/234)
>>> - Add exynos5433_tmu_control() instead of using
>>> exynos7_tmu_control() on both Exynos5433 and Exynos7.
>>> - Separate the patches related to devicetree and then send send
>>> Exnos5433's tmu patches[1] with other Exynos5433 devicetree patches.
>>> [1] https://lkml.org/lkml/2015/3/9/1036
>>>
>>> drivers/thermal/samsung/exynos_tmu.c | 187
>>> ++++++++++++++++++++++++++++++++++-
>>> drivers/thermal/samsung/exynos_tmu.h | 1 + 2 files changed, 186
>>> insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.c
>>> b/drivers/thermal/samsung/exynos_tmu.c index 1d30b09..531f4b17
>>> 100644 --- a/drivers/thermal/samsung/exynos_tmu.c
>>> +++ b/drivers/thermal/samsung/exynos_tmu.c
>>> @@ -97,6 +97,32 @@
>>> #define EXYNOS4412_MUX_ADDR_VALUE 6
>>> #define EXYNOS4412_MUX_ADDR_SHIFT 20
>>>
>>> +/* Exynos5433 specific registers */
>>> +#define EXYNOS5433_TMU_REG_CONTROL1 0x024
>>> +#define EXYNOS5433_TMU_SAMPLING_INTERVAL 0x02c
>>> +#define EXYNOS5433_TMU_COUNTER_VALUE0 0x030
>>> +#define EXYNOS5433_TMU_COUNTER_VALUE1 0x034
>>> +#define EXYNOS5433_TMU_REG_CURRENT_TEMP1 0x044
>>> +#define EXYNOS5433_THD_TEMP_RISE3_0 0x050
>>> +#define EXYNOS5433_THD_TEMP_RISE7_4 0x054
>>> +#define EXYNOS5433_THD_TEMP_FALL3_0 0x060
>>> +#define EXYNOS5433_THD_TEMP_FALL7_4 0x064
>>> +#define EXYNOS5433_TMU_REG_INTEN 0x0c0
>>> +#define EXYNOS5433_TMU_REG_INTPEND 0x0c8
>>> +#define EXYNOS5433_TMU_EMUL_CON 0x110
>>> +#define EXYNOS5433_TMU_PD_DET_EN 0x130
>>> +
>>> +#define EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT 16
>>> +#define EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT 23
>>> +#define EXYNOS5433_TRIMINFO_SENSOR_ID_MASK \
>>> + (0xf <<
>>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT) +#define
>>> EXYNOS5433_TRIMINFO_CALIB_SEL_MASK BIT(23) +
>>> +#define EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING 0
>>> +#define EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING 1
>>> +
>>> +#define EXYNOS5433_PD_DET_EN 1
>>> +
>>> /*exynos5440 specific registers*/
>>> #define EXYNOS5440_TMU_S0_7_TRIM 0x000
>>> #define EXYNOS5440_TMU_S0_7_CTRL 0x020
>>> @@ -484,6 +510,101 @@ out:
>>> return ret;
>>> }
>>>
>>> +static int exynos5433_tmu_initialize(struct platform_device *pdev)
>>> +{
>>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> + struct exynos_tmu_platform_data *pdata = data->pdata;
>>> + struct thermal_zone_device *tz = data->tzd;
>>> + unsigned int status, trim_info;
>>> + unsigned int rising_threshold = 0, falling_threshold = 0;
>>> + unsigned long temp, temp_hist;
>>> + int ret = 0, threshold_code, i, sensor_id, cal_type;
>>> +
>>> + status = readb(data->base + EXYNOS_TMU_REG_STATUS);
>>> + if (!status) {
>>> + ret = -EBUSY;
>>> + goto out;
>>> + }
>>> +
>>> + trim_info = readl(data->base + EXYNOS_TMU_REG_TRIMINFO);
>>> + sanitize_temp_error(data, trim_info);
>>> +
>>> + /* Read the temperature sensor id */
>>> + sensor_id = (trim_info &
>>> EXYNOS5433_TRIMINFO_SENSOR_ID_MASK)
>>> + >>
>>> EXYNOS5433_TRIMINFO_SENSOR_ID_SHIFT;
>>> + dev_info(&pdev->dev, "Temperature sensor ID: 0x%x\n",
>>> sensor_id); +
>>> + /* Read the calibration mode */
>>> + writel(trim_info, data->base + EXYNOS_TMU_REG_TRIMINFO);
>>> + cal_type = (trim_info & EXYNOS5433_TRIMINFO_CALIB_SEL_MASK)
>>> + >>
>>> EXYNOS5433_TRIMINFO_CALIB_SEL_SHIFT; +
>>> + switch (cal_type) {
>>> + case EXYNOS5433_TRIMINFO_ONE_POINT_TRIMMING:
>>> + pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
>>> + break;
>>> + case EXYNOS5433_TRIMINFO_TWO_POINT_TRIMMING:
>>> + pdata->cal_type = TYPE_TWO_POINT_TRIMMING;
>>> + break;
>>> + default:
>>> + pdata->cal_type = TYPE_ONE_POINT_TRIMMING;
>>> + break;
>>> + };
>>> +
>>> + dev_info(&pdev->dev, "Calibration type is %d-point
>>> calibration\n",
>>> + cal_type ? 2 : 1);
>>> +
>>> + /* Write temperature code for rising and falling threshold
>>> */
>>> + for (i = 0; i < of_thermal_get_ntrips(tz); i++) {
>>> + int rising_reg_offset, falling_reg_offset;
>>> + int j = 0;
>>> +
>>> + switch (i) {
>>> + case 0:
>>> + case 1:
>>> + case 2:
>>> + case 3:
>>> + rising_reg_offset =
>>> EXYNOS5433_THD_TEMP_RISE3_0;
>>> + falling_reg_offset =
>>> EXYNOS5433_THD_TEMP_FALL3_0;
>>> + j = i;
>>> + break;
>>> + case 4:
>>> + case 5:
>>> + case 6:
>>> + case 7:
>>> + rising_reg_offset =
>>> EXYNOS5433_THD_TEMP_RISE7_4;
>>> + falling_reg_offset =
>>> EXYNOS5433_THD_TEMP_FALL7_4;
>>> + j = i - 4;
>>> + break;
>>> + default:
>>> + continue;
>>> + }
>>> +
>>> + /* Write temperature code for rising threshold */
>>> + tz->ops->get_trip_temp(tz, i, &temp);
>>> + temp /= MCELSIUS;
>>> + threshold_code = temp_to_code(data, temp);
>>> +
>>> + rising_threshold = readl(data->base +
>>> rising_reg_offset);
>>> + rising_threshold |= (threshold_code << j * 8);
>>> + writel(rising_threshold, data->base +
>>> rising_reg_offset); +
>>> + /* Write temperature code for falling threshold */
>>> + tz->ops->get_trip_hyst(tz, i, &temp_hist);
>>> + temp_hist = temp - (temp_hist / MCELSIUS);
>>> + threshold_code = temp_to_code(data, temp_hist);
>>> +
>>> + falling_threshold = readl(data->base +
>>> falling_reg_offset);
>>> + falling_threshold &= ~(0xff << j * 8);
>>> + falling_threshold |= (threshold_code << j * 8);
>>> + writel(falling_threshold, data->base +
>>> falling_reg_offset);
>>> + }
>>> +
>>> + data->tmu_clear_irqs(data);
>>> +out:
>>> + return ret;
>>> +}
>>> +
>>> static int exynos5440_tmu_initialize(struct platform_device *pdev)
>>> {
>>> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> @@ -643,6 +764,48 @@ static void exynos4210_tmu_control(struct
>>> platform_device *pdev, bool on) writel(con, data->base +
>>> EXYNOS_TMU_REG_CONTROL); }
>>>
>>> +static void exynos5433_tmu_control(struct platform_device *pdev,
>>> bool on) +{
>>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> + struct thermal_zone_device *tz = data->tzd;
>>> + unsigned int con, interrupt_en, pd_det_en;
>>> +
>>> + con = get_con_reg(data, readl(data->base +
>>> EXYNOS_TMU_REG_CONTROL)); +
>>> + if (on) {
>>> + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
>>> + interrupt_en =
>>> + (of_thermal_is_trip_valid(tz, 7)
>>> + << EXYNOS7_TMU_INTEN_RISE7_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 6)
>>> + << EXYNOS7_TMU_INTEN_RISE6_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 5)
>>> + << EXYNOS7_TMU_INTEN_RISE5_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 4)
>>> + << EXYNOS7_TMU_INTEN_RISE4_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 3)
>>> + << EXYNOS7_TMU_INTEN_RISE3_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 2)
>>> + << EXYNOS7_TMU_INTEN_RISE2_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 1)
>>> + << EXYNOS7_TMU_INTEN_RISE1_SHIFT) |
>>> + (of_thermal_is_trip_valid(tz, 0)
>>> + << EXYNOS7_TMU_INTEN_RISE0_SHIFT);
>>> +
>>> + interrupt_en |=
>>> + interrupt_en <<
>>> EXYNOS_TMU_INTEN_FALL0_SHIFT;
>>> + } else {
>>> + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
>>> + interrupt_en = 0; /* Disable all interrupts */
>>> + }
>>> +
>>> + pd_det_en = on ? EXYNOS5433_PD_DET_EN : 0;
>>> +
>>> + writel(pd_det_en, data->base + EXYNOS5433_TMU_PD_DET_EN);
>>> + writel(interrupt_en, data->base +
>>> EXYNOS5433_TMU_REG_INTEN);
>>> + writel(con, data->base + EXYNOS_TMU_REG_CONTROL);
>>> +}
>>> +
>>> static void exynos5440_tmu_control(struct platform_device *pdev,
>>> bool on) {
>>> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> @@ -770,6 +933,8 @@ static void exynos4412_tmu_set_emulation(struct
>>> exynos_tmu_data *data,
>>> if (data->soc == SOC_ARCH_EXYNOS5260)
>>> emul_con = EXYNOS5260_EMUL_CON;
>>> + if (data->soc == SOC_ARCH_EXYNOS5433)
>>> + emul_con = EXYNOS5433_TMU_EMUL_CON;
>>> else if (data->soc == SOC_ARCH_EXYNOS7)
>>> emul_con = EXYNOS7_TMU_REG_EMUL_CON;
>>> else
>>> @@ -882,6 +1047,9 @@ static void exynos4210_tmu_clear_irqs(struct
>>> exynos_tmu_data *data) } else if (data->soc == SOC_ARCH_EXYNOS7) {
>>> tmu_intstat = EXYNOS7_TMU_REG_INTPEND;
>>> tmu_intclear = EXYNOS7_TMU_REG_INTPEND;
>>> + } else if (data->soc == SOC_ARCH_EXYNOS5433) {
>>> + tmu_intstat = EXYNOS5433_TMU_REG_INTPEND;
>>> + tmu_intclear = EXYNOS5433_TMU_REG_INTPEND;
>>> } else {
>>> tmu_intstat = EXYNOS_TMU_REG_INTSTAT;
>>> tmu_intclear = EXYNOS_TMU_REG_INTCLEAR;
>>> @@ -926,6 +1094,7 @@ static const struct of_device_id
>>> exynos_tmu_match[] = { { .compatible = "samsung,exynos5260-tmu", },
>>> { .compatible = "samsung,exynos5420-tmu", },
>>> { .compatible = "samsung,exynos5420-tmu-ext-triminfo", },
>>> + { .compatible = "samsung,exynos5433-tmu", },
>>> { .compatible = "samsung,exynos5440-tmu", },
>>> { .compatible = "samsung,exynos7-tmu", },
>>> { /* sentinel */ },
>>> @@ -949,6 +1118,8 @@ static int exynos_of_get_soc_type(struct
>>> device_node *np) else if (of_device_is_compatible(np,
>>> "samsung,exynos5420-tmu-ext-triminfo"))
>>> return SOC_ARCH_EXYNOS5420_TRIMINFO;
>>> + else if (of_device_is_compatible(np,
>>> "samsung,exynos5433-tmu"))
>>> + return SOC_ARCH_EXYNOS5433;
>>> else if (of_device_is_compatible(np,
>>> "samsung,exynos5440-tmu")) return SOC_ARCH_EXYNOS5440;
>>> else if (of_device_is_compatible(np,
>>> "samsung,exynos7-tmu")) @@ -1069,6 +1240,13 @@ static int
>>> exynos_map_dt_data(struct platform_device *pdev)
>>> data->tmu_set_emulation = exynos4412_tmu_set_emulation;
>>> data->tmu_clear_irqs = exynos4210_tmu_clear_irqs; break;
>>> + case SOC_ARCH_EXYNOS5433:
>>> + data->tmu_initialize = exynos5433_tmu_initialize;
>>> + data->tmu_control = exynos5433_tmu_control;
>>> + data->tmu_read = exynos4412_tmu_read;
>>> + data->tmu_set_emulation =
>>> exynos4412_tmu_set_emulation;
>>> + data->tmu_clear_irqs = exynos4210_tmu_clear_irqs;
>>> + break;
>>> case SOC_ARCH_EXYNOS5440:
>>> data->tmu_initialize = exynos5440_tmu_initialize;
>>> data->tmu_control = exynos5440_tmu_control;
>>> @@ -1172,7 +1350,9 @@ static int exynos_tmu_probe(struct
>>> platform_device *pdev) goto err_clk_sec;
>>> }
>>>
>>> - if (data->soc == SOC_ARCH_EXYNOS7) {
>>> + switch (data->soc) {
>>> + case SOC_ARCH_EXYNOS5433:
>>> + case SOC_ARCH_EXYNOS7:
>>> data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
>>> if (IS_ERR(data->sclk)) {
>>> dev_err(&pdev->dev, "Failed to get
>>> sclk\n"); @@ -1184,7 +1364,10 @@ static int exynos_tmu_probe(struct
>>> platform_device *pdev) goto err_clk;
>>> }
>>> }
>>> - }
>>> + break;
>>> + default:
>>> + break;
>>> + };
>>>
>>> ret = exynos_tmu_initialize(pdev);
>>> if (ret) {
>>> diff --git a/drivers/thermal/samsung/exynos_tmu.h
>>> b/drivers/thermal/samsung/exynos_tmu.h index 4d71ec6..440c714 100644
>>> --- a/drivers/thermal/samsung/exynos_tmu.h
>>> +++ b/drivers/thermal/samsung/exynos_tmu.h
>>> @@ -33,6 +33,7 @@ enum soc_type {
>>> SOC_ARCH_EXYNOS5260,
>>> SOC_ARCH_EXYNOS5420,
>>> SOC_ARCH_EXYNOS5420_TRIMINFO,
>>> + SOC_ARCH_EXYNOS5433,
>>> SOC_ARCH_EXYNOS5440,
>>> SOC_ARCH_EXYNOS7,
>>> };
>>>
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/