Re: [PATCH 3/8] drivers/mfd: Add lookup table for Panel Control as GPIO signal

[Lee Jones]

By the way, your subject lines are messed up.

They should adhere to the conventions laid down by the Maintainers.

`git log --oneline -- drivers/<subsystem>`

> On some Intel SoC platforms, the panel enable/disable signals are
> controlled by CRC PMIC. Add those control as a new GPIO in a lookup
> table for gpio-crystalcove chip during CRC driver load
> 
> v2: Make the lookup table static (Thierry)
>     Remove the lookup table during driver remove (Thierry)
> 
> CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Alexandre Courbot <gnurou@xxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
> ---
>  drivers/mfd/intel_soc_pmic_core.c | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
> index 7b50b6b..f3d918e 100644
> --- a/drivers/mfd/intel_soc_pmic_core.c
> +++ b/drivers/mfd/intel_soc_pmic_core.c
> @@ -24,8 +24,19 @@
>  #include <linux/acpi.h>
>  #include <linux/regmap.h>
>  #include <linux/mfd/intel_soc_pmic.h>
> +#include <linux/gpio/machine.h>
>  #include "intel_soc_pmic_core.h"
>  
> +/* Lookup table for the Panel Enable/Disable line as GPIO signals */
> +static struct gpiod_lookup_table panel_gpio_table = {
> +	/* Intel GFX is consumer */
> +	.dev_id = "0000:00:02.0",
> +	.table = {
> +		/* Panel EN/DISABLE */
> +		GPIO_LOOKUP("gpio_crystalcove", 94, "panel", GPIO_ACTIVE_HIGH),
> +	},
> +};
> +
>  static int intel_soc_pmic_find_gpio_irq(struct device *dev)
>  {
>  	struct gpio_desc *desc;
> @@ -85,6 +96,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
>  	if (ret)
>  		dev_warn(dev, "Can't enable IRQ as wake source: %d\n", ret);
>  
> +	/* Add lookup table binding for Panel Control to the GPIO Chip */
> +	gpiod_add_lookup_table(&panel_gpio_table);
> +
>  	ret = mfd_add_devices(dev, -1, config->cell_dev,
>  			      config->n_cell_devs, NULL, 0,
>  			      regmap_irq_get_domain(pmic->irq_chip_data));
> @@ -104,6 +118,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
>  
>  	regmap_del_irq_chip(pmic->irq, pmic->irq_chip_data);
>  
> +	/* Remove lookup table for Panel Control from the GPIO Chip */
> +	gpiod_remove_lookup_table(&panel_gpio_table);
> +
>  	mfd_remove_devices(&i2c->dev);
>  
>  	return 0;

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/