Re: [PATCH V7 5/9] mfd: Add driver for NVIDIA Tegra XUSB

[Lee Jones]

On Wed, 29 Apr 2015, Andrew Bresticker wrote:

> Lee,
> 
> On Wed, Apr 29, 2015 at 2:23 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > On Mon, 27 Apr 2015, Andrew Bresticker wrote:
> >
> >> Add an MFD driver for the XUSB host complex found on NVIDIA Tegra124
> >> and later SoCs.
> >>
> >> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> >> Cc: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> >> Cc: Lee Jones <lee.jones@xxxxxxxxxx>
> 
> >> --- /dev/null
> >> +++ b/drivers/mfd/tegra-xusb.c
> 
> >> +struct tegra_xusb_soc_data {
> >> +     struct mfd_cell *devs;
> >> +     unsigned int num_devs;
> >> +};
> >> +
> >> +static struct resource tegra_xhci_resources[] = {
> >> +     {
> >> +             .name = "host",
> >> +             .flags = IORESOURCE_IRQ,
> >> +     },
> >> +     {
> >> +             .name = "xhci",
> >> +             .flags = IORESOURCE_MEM,
> >> +     },
> >> +     {
> >> +             .name = "ipfs",
> >> +             .flags = IORESOURCE_MEM,
> >> +     },
> >> +};
> >> +
> >> +static struct resource tegra_xusb_mbox_resources[] = {
> >> +     {
> >> +             .name = "smi",
> >> +             .flags = IORESOURCE_IRQ,
> >> +     },
> >> +};
> >
> > DEFINE_RES_IRQ_NAMED()
> >
> >> +static struct mfd_cell tegra124_xusb_devs[] = {
> >> +     {
> >> +             .name = "tegra-xhci",
> >> +             .of_compatible = "nvidia,tegra124-xhci",
> >> +     },
> >> +     {
> >> +             .name = "tegra-xusb-mbox",
> >> +             .of_compatible = "nvidia,tegra124-xusb-mbox",
> >> +     },
> >> +};
> >> +
> >> +static const struct tegra_xusb_soc_data tegra124_xusb_data = {
> >> +     .devs = tegra124_xusb_devs,
> >> +     .num_devs = ARRAY_SIZE(tegra124_xusb_devs),
> >> +};
> >> +
> >> +static const struct of_device_id tegra_xusb_of_match[] = {
> >> +     { .compatible = "nvidia,tegra124-xusb", .data = &tegra124_xusb_data },
> >
> > Yuk!  Why are you mixing platform data and DT in this way?
> >
> > Why can't you just stick all of this in DT?
> 
> I assume you mean the resources?  The compatible strings will at least
> need to be SoC-specific since they will change from SoC to SoC.
> 
> >> +     {},
> >> +};
> >> +
> >> +MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
> >> +static struct regmap_config tegra_fpci_regmap_config = {
> >> +     .reg_bits = 32,
> >> +     .val_bits = 32,
> >> +     .reg_stride = 4,
> >> +};
> >> +
> >> +static int tegra_xusb_probe(struct platform_device *pdev)
> >> +{
> >> +     const struct tegra_xusb_soc_data *soc;
> >> +     const struct of_device_id *match;
> >> +     struct tegra_xusb *xusb;
> >> +     struct resource *res;
> >> +     void __iomem *fpci_base;
> >> +     int irq, ret;
> >> +
> >> +     xusb = devm_kzalloc(&pdev->dev, sizeof(*xusb), GFP_KERNEL);
> >> +     if (!xusb)
> >> +             return -ENOMEM;
> >> +     platform_set_drvdata(pdev, xusb);
> >> +
> >> +     match = of_match_node(tegra_xusb_of_match, pdev->dev.of_node);
> >> +     soc = match->data;
> >> +
> >> +     irq = platform_get_irq_byname(pdev, "host");
> >> +     if (irq < 0)
> >> +             return irq;
> >> +     tegra_xhci_resources[0].start = irq;
> >> +     tegra_xhci_resources[0].end = irq;
> >> +
> >> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "xhci");
> >> +     if (!res)
> >> +             return -ENODEV;
> >> +     tegra_xhci_resources[1].start = res->start;
> >> +     tegra_xhci_resources[1].end = res->end;
> >> +
> >> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ipfs");
> >> +     if (!res)
> >> +             return -ENODEV;
> >> +     tegra_xhci_resources[2].start = res->start;
> >> +     tegra_xhci_resources[2].end = res->end;
> >> +
> >> +     soc->devs[0].resources = tegra_xhci_resources;
> >> +     soc->devs[0].num_resources = ARRAY_SIZE(tegra_xhci_resources);
> >> +
> >> +     irq = platform_get_irq_byname(pdev, "smi");
> >> +     if (irq < 0)
> >> +             return irq;
> >> +     tegra_xusb_mbox_resources[0].start = irq;
> >> +     tegra_xusb_mbox_resources[0].end = irq;
> >> +
> >> +     soc->devs[1].resources = tegra_xusb_mbox_resources;
> >> +     soc->devs[1].num_resources = ARRAY_SIZE(tegra_xusb_mbox_resources);
> >> +
> >> +     res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fpci");
> >> +     fpci_base = devm_ioremap_resource(&pdev->dev, res);
> >> +     if (IS_ERR(fpci_base))
> >> +             return PTR_ERR(fpci_base);
> >
> > This stuff is not good.
> >
> > Either let MFD handle it with mfd_cells or stick all of this stuff in
> > DT and parse it from the child devices.
> 
> I'm not sure what exactly you mean by "let MFD handle it with
> mfd_cells" here - is that not what I'm doing now?  Anyway I think that
> leaves two ways of representing this in DT.
> 
> Either have the MFD take a single IOMEM resource and divide it up
> statically within the driver:
> 
> usb@0,70090000 {
>         compatible = "nvidia,tegra124-xusb";
>         reg = <0x0 0x70090000 0x0 0xa000>;
> 
>         usb-host {
>                 compatible = "nvidia,tegra124-xhci";
>                 interrupts = <...>;
>                 ...
>         }:
> 
>         mailbox {
>                 compatible = "nvidia,tegra124-xusb-mbox";
>                 interrupts = <...>;
>                 ...
>         };
> };
> 
> ... or have the MFD take only the shared FPCI resource and have the
> sub-devices parse the rest from DT:
> 
> usb@0,70098000 {
>         compatible = "nvidia,tegra124-xusb";
>         reg = <0x0 0x70098000 0x0 0x1000>;
>         ranges;
> 
>         usb-host@0,70090000 {
>                 compatible = "nvidia,tegra124-xhci";
>                 reg = <0x0 0x70090000 0x0 0x8000>,
>                         <0x0 0x70099000 0x0 0x1000>;
>                 interrupts = <...>;
>                 ...
>         }:
> 
>         mailbox {
>                 compatible = "nvidia,tegra124-xusb-mbox";
>                 interrupts = <...>;
>                 ...
>         };
> };
> 
> I don't have a strong preference here, but I think the former more
> accurately represents the resource hierarchy.  Since Thierry requested
> the use of an MFD, I'd like him to weigh in on this - Thierry?

The latter is what I had in mind.

> >> +     tegra_fpci_regmap_config.max_register = res->end - res->start - 3;
> >> +     xusb->fpci_regs = devm_regmap_init_mmio(&pdev->dev, fpci_base,
> >> +                                             &tegra_fpci_regmap_config);
> >> +     if (IS_ERR(xusb->fpci_regs)) {
> >> +             ret = PTR_ERR(xusb->fpci_regs);
> >> +             dev_err(&pdev->dev, "Failed to init regmap: %d\n", ret);
> >> +             return ret;
> >> +     }
> >> +
> >> +     ret = mfd_add_devices(&pdev->dev, -1, soc->devs, soc->num_devs,
> >> +                           NULL, 0, NULL);
> >> +     if (ret) {
> >> +             dev_err(&pdev->dev, "Failed to add MFD devices: %d\n", ret);
> >> +             return ret;
> >> +     }
> >> +
> >> +     return 0;
> >> +}
> 
> >> --- /dev/null
> >> +++ b/include/soc/tegra/xusb.h
> 
> >> +struct tegra_xusb {
> >> +     struct regmap *fpci_regs;
> >
> > Are you going to add to this?
> 
> No, I don't have any plans to add to this struct.

Then you don't require a struct.  :)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/