[PATCH v3 10/10] mfd: wm5110: Add delay before releasing reset line

[Charles Keepax]

On the wm5110 it is important the reset line is held for slightly longer
to ensure the device starts up well. This patch adds a 5mS delay for
this.

Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
 drivers/mfd/arizona-core.c |   10 ++++++++++
 1 files changed, 10 insertions(+), 0 deletions(-)

diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index f1ff68a..93e4d94 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -259,6 +259,16 @@ static inline void arizona_enable_reset(struct arizona *arizona)
 static void arizona_disable_reset(struct arizona *arizona)
 {
 	if (arizona->pdata.reset) {
+		switch (arizona->type) {
+		case WM5110:
+		case WM8280:
+			/* Meet requirements for minimum reset duration */
+			msleep(5);
+			break;
+		default:
+			break;
+		}
+
 		gpio_set_value_cansleep(arizona->pdata.reset, 1);
 		msleep(1);
 	}
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/