[PATCH v3 0/3] ARM: berlin: ADC support

[Antoine Tenart]

Hi,

The Berlin ADC provides 8 channels, with one connected to a temperature
sensor. The temperature sensor has its own registers and both the ADC
and the temperature sensor need to be configured when using it.

This series is based on the two Berlin controllers rework series:
- https://lkml.org/lkml/2015/3/6/511
- https://lkml.org/lkml/2015/3/6/535

Antoine

Changes since v2:
	- took care of double free issues
	- always enable the ADC in the device tree as there is no gated
	  clock
	- moved the interrupt enable code before the channel reading
	  function
	- cosmetic changes

Changes since v1:
        - updated to use regmap_update_bits()
        - fixed mixed berlin/berlin2 and some prefixes
        - reworked channel definitions
        - moved to IIO_CHAN_INFO_PROCESSED for the tsen
        - fixed some typos
        - cosmetic changes

Antoine Tenart (3):
  iio: adc: add support for Berlin
  Documentation: bindings: document the Berlin ADC driver
  ARM: berlin: add an ADC node for the BG2Q

 .../devicetree/bindings/iio/adc/berlin2_adc.txt    |  19 +
 arch/arm/boot/dts/berlin2q.dtsi                    |   7 +
 drivers/iio/adc/Kconfig                            |   7 +
 drivers/iio/adc/Makefile                           |   1 +
 drivers/iio/adc/berlin2-adc.c                      | 381 +++++++++++++++++++++
 5 files changed, 415 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/berlin2_adc.txt
 create mode 100644 drivers/iio/adc/berlin2-adc.c

-- 
2.4.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/