Re: [PATCH v17 1/2] sys_membarrier(): system-wide memory barrier (generic, x86)
From: Michael Kerrisk (man-pages)
Date: Tue May 05 2015 - 01:57:20 EST
[CC += linux-api@xxxxxxxxxxxxxxx]
Since this is a kernel-user-space API change, please CC linux-api@.
The kernel source file Documentation/SubmitChecklist notes that all
Linux kernel patches that change userspace interfaces should be CCed
to linux-api@xxxxxxxxxxxxxxx, so that the various parties who are
interested in API changes are informed. For further information, see
https://www.kernel.org/doc/man-pages/linux-api-ml.html
Thanks,
Michael
On 4 May 2015 at 23:00, Mathieu Desnoyers
<mathieu.desnoyers@xxxxxxxxxxxx> wrote:
> Here is an implementation of a new system call, sys_membarrier(), which
> executes a memory barrier on all threads running on the system. It is
> implemented by calling synchronize_sched(). It can be used to distribute
> the cost of user-space memory barriers asymmetrically by transforming
> pairs of memory barriers into pairs consisting of sys_membarrier() and a
> compiler barrier. For synchronization primitives that distinguish
> between read-side and write-side (e.g. userspace RCU [1], rwlocks), the
> read-side can be accelerated significantly by moving the bulk of the
> memory barrier overhead to the write-side.
>
> It is based on kernel v4.1-rc2.
>
> To explain the benefit of this scheme, let's introduce two example threads:
>
> Thread A (non-frequent, e.g. executing liburcu synchronize_rcu())
> Thread B (frequent, e.g. executing liburcu
> rcu_read_lock()/rcu_read_unlock())
>
> In a scheme where all smp_mb() in thread A are ordering memory accesses
> with respect to smp_mb() present in Thread B, we can change each
> smp_mb() within Thread A into calls to sys_membarrier() and each
> smp_mb() within Thread B into compiler barriers "barrier()".
>
> Before the change, we had, for each smp_mb() pairs:
>
> Thread A Thread B
> previous mem accesses previous mem accesses
> smp_mb() smp_mb()
> following mem accesses following mem accesses
>
> After the change, these pairs become:
>
> Thread A Thread B
> prev mem accesses prev mem accesses
> sys_membarrier() barrier()
> follow mem accesses follow mem accesses
>
> As we can see, there are two possible scenarios: either Thread B memory
> accesses do not happen concurrently with Thread A accesses (1), or they
> do (2).
>
> 1) Non-concurrent Thread A vs Thread B accesses:
>
> Thread A Thread B
> prev mem accesses
> sys_membarrier()
> follow mem accesses
> prev mem accesses
> barrier()
> follow mem accesses
>
> In this case, thread B accesses will be weakly ordered. This is OK,
> because at that point, thread A is not particularly interested in
> ordering them with respect to its own accesses.
>
> 2) Concurrent Thread A vs Thread B accesses
>
> Thread A Thread B
> prev mem accesses prev mem accesses
> sys_membarrier() barrier()
> follow mem accesses follow mem accesses
>
> In this case, thread B accesses, which are ensured to be in program
> order thanks to the compiler barrier, will be "upgraded" to full
> smp_mb() by synchronize_sched().
>
> * Benchmarks
>
> On Intel Xeon E5405 (8 cores)
> (one thread is calling sys_membarrier, the other 7 threads are busy
> looping)
>
> 1000 non-expedited sys_membarrier calls in 33s = 33 milliseconds/call.
>
> * User-space user of this system call: Userspace RCU library
>
> Both the signal-based and the sys_membarrier userspace RCU schemes
> permit us to remove the memory barrier from the userspace RCU
> rcu_read_lock() and rcu_read_unlock() primitives, thus significantly
> accelerating them. These memory barriers are replaced by compiler
> barriers on the read-side, and all matching memory barriers on the
> write-side are turned into an invocation of a memory barrier on all
> active threads in the process. By letting the kernel perform this
> synchronization rather than dumbly sending a signal to every process
> threads (as we currently do), we diminish the number of unnecessary wake
> ups and only issue the memory barriers on active threads. Non-running
> threads do not need to execute such barrier anyway, because these are
> implied by the scheduler context switches.
>
> Results in liburcu:
>
> Operations in 10s, 6 readers, 2 writers:
>
> memory barriers in reader: 1701557485 reads, 3129842 writes
> signal-based scheme: 9825306874 reads, 5386 writes
> sys_membarrier: 7992076602 reads, 220 writes
>
> The dynamic sys_membarrier availability check adds some overhead to
> the read-side compared to the signal-based scheme, but besides that,
> with the expedited scheme, we can see that we are close to the read-side
> performance of the signal-based scheme. However, this non-expedited
> sys_membarrier implementation has a much slower grace period than signal
> and memory barrier schemes.
>
> An expedited version of this system call can be added later on to speed
> up the grace period. Its implementation will likely depend on reading
> the cpu_curr()->mm without holding each CPU's rq lock.
>
> This patch adds the system call to x86 and to asm-generic.
>
> membarrier(2) man page:
> --------------- snip -------------------
> MEMBARRIER(2) Linux Programmer's Manual MEMBARRIER(2)
>
> NAME
> membarrier - issue memory barriers on a set of threads
>
> SYNOPSIS
> #include <linux/membarrier.h>
>
> int membarrier(int cmd, int flags);
>
> DESCRIPTION
> The cmd argument is one of the following:
>
> MEMBARRIER_CMD_QUERY
> Query the set of supported commands. It returns a bitmask of
> supported commands.
>
> MEMBARRIER_CMD_SHARED
> Execute a memory barrier on all threads running on the system.
> Upon return from system call, the caller thread is ensured that
> all running threads have passed through a state where all memory
> accesses to user-space addresses match program order between
> entry to and return from the system call (non-running threads
> are de facto in such a state). This covers threads from all proâ
> cesses running on the system. This command returns 0.
>
> The flags argument needs to be 0. For future extensions.
>
> All memory accesses performed in program order from each targeted
> thread is guaranteed to be ordered with respect to sys_membarrier(). If
> we use the semantic "barrier()" to represent a compiler barrier forcing
> memory accesses to be performed in program order across the barrier,
> and smp_mb() to represent explicit memory barriers forcing full memory
> ordering across the barrier, we have the following ordering table for
> each pair of barrier(), sys_membarrier() and smp_mb():
>
> The pair ordering is detailed as (O: ordered, X: not ordered):
>
> barrier() smp_mb() sys_membarrier()
> barrier() X X O
> smp_mb() X O O
> sys_membarrier() O O O
>
> RETURN VALUE
> On success, these system calls return zero. On error, -1 is returned,
> and errno is set appropriately. For a given command, with flags
> argument set to 0, this system call is guaranteed to always return the
> same value until reboot.
>
> ERRORS
> ENOSYS System call is not implemented.
>
> EINVAL Invalid arguments.
>
> Linux 2015-04-15 MEMBARRIER(2)
> --------------- snip -------------------
>
> [1] http://urcu.so
>
> Changes since v16:
> - Update documentation.
> - Add man page to changelog.
> - Build sys_membarrier on !CONFIG_SMP. It allows userspace applications
> to not care about the number of processors on the system. Based on
> recommendations from Stephen Hemminger and Steven Rostedt.
> - Check that flags argument is 0, update documentation to require it.
>
> Changes since v15:
> - Add flags argument in addition to cmd.
> - Update documentation.
>
> Changes since v14:
> - Take care of Thomas Gleixner's comments.
>
> Changes since v13:
> - Move to kernel/membarrier.c.
> - Remove MEMBARRIER_PRIVATE flag.
> - Add MAINTAINERS file entry.
>
> Changes since v12:
> - Remove _FLAG suffix from uapi flags.
> - Add Expert menuconfig option CONFIG_MEMBARRIER (default=y).
> - Remove EXPEDITED mode. Only implement non-expedited for now, until
> reading the cpu_curr()->mm can be done without holding the CPU's rq
> lock.
>
> Changes since v11:
> - 5 years have passed.
> - Rebase on v3.19 kernel.
> - Add futex-alike PRIVATE vs SHARED semantic: private for per-process
> barriers, non-private for memory mappings shared between processes.
> - Simplify user API.
> - Code refactoring.
>
> Changes since v10:
> - Apply Randy's comments.
> - Rebase on 2.6.34-rc4 -tip.
>
> Changes since v9:
> - Clean up #ifdef CONFIG_SMP.
>
> Changes since v8:
> - Go back to rq spin locks taken by sys_membarrier() rather than adding
> memory barriers to the scheduler. It implies a potential RoS
> (reduction of service) if sys_membarrier() is executed in a busy-loop
> by a user, but nothing more than what is already possible with other
> existing system calls, but saves memory barriers in the scheduler fast
> path.
> - re-add the memory barrier comments to x86 switch_mm() as an example to
> other architectures.
> - Update documentation of the memory barriers in sys_membarrier and
> switch_mm().
> - Append execution scenarios to the changelog showing the purpose of
> each memory barrier.
>
> Changes since v7:
> - Move spinlock-mb and scheduler related changes to separate patches.
> - Add support for sys_membarrier on x86_32.
> - Only x86 32/64 system calls are reserved in this patch. It is planned
> to incrementally reserve syscall IDs on other architectures as these
> are tested.
>
> Changes since v6:
> - Remove some unlikely() not so unlikely.
> - Add the proper scheduler memory barriers needed to only use the RCU
> read lock in sys_membarrier rather than take each runqueue spinlock:
> - Move memory barriers from per-architecture switch_mm() to schedule()
> and finish_lock_switch(), where they clearly document that all data
> protected by the rq lock is guaranteed to have memory barriers issued
> between the scheduler update and the task execution. Replacing the
> spin lock acquire/release barriers with these memory barriers imply
> either no overhead (x86 spinlock atomic instruction already implies a
> full mb) or some hopefully small overhead caused by the upgrade of the
> spinlock acquire/release barriers to more heavyweight smp_mb().
> - The "generic" version of spinlock-mb.h declares both a mapping to
> standard spinlocks and full memory barriers. Each architecture can
> specialize this header following their own need and declare
> CONFIG_HAVE_SPINLOCK_MB to use their own spinlock-mb.h.
> - Note: benchmarks of scheduler overhead with specialized spinlock-mb.h
> implementations on a wide range of architecture would be welcome.
>
> Changes since v5:
> - Plan ahead for extensibility by introducing mandatory/optional masks
> to the "flags" system call parameter. Past experience with accept4(),
> signalfd4(), eventfd2(), epoll_create1(), dup3(), pipe2(), and
> inotify_init1() indicates that this is the kind of thing we want to
> plan for. Return -EINVAL if the mandatory flags received are unknown.
> - Create include/linux/membarrier.h to define these flags.
> - Add MEMBARRIER_QUERY optional flag.
>
> Changes since v4:
> - Add "int expedited" parameter, use synchronize_sched() in the
> non-expedited case. Thanks to Lai Jiangshan for making us consider
> seriously using synchronize_sched() to provide the low-overhead
> membarrier scheme.
> - Check num_online_cpus() == 1, quickly return without doing nothing.
>
> Changes since v3a:
> - Confirm that each CPU indeed runs the current task's ->mm before
> sending an IPI. Ensures that we do not disturb RT tasks in the
> presence of lazy TLB shootdown.
> - Document memory barriers needed in switch_mm().
> - Surround helper functions with #ifdef CONFIG_SMP.
>
> Changes since v2:
> - simply send-to-many to the mm_cpumask. It contains the list of
> processors we have to IPI to (which use the mm), and this mask is
> updated atomically.
>
> Changes since v1:
> - Only perform the IPI in CONFIG_SMP.
> - Only perform the IPI if the process has more than one thread.
> - Only send IPIs to CPUs involved with threads belonging to our process.
> - Adaptative IPI scheme (single vs many IPI with threshold).
> - Issue smp_mb() at the beginning and end of the system call.
>
> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> Reviewed-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx>
> CC: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
> CC: KOSAKI Motohiro <kosaki.motohiro@xxxxxxxxxxxxxx>
> CC: Steven Rostedt <rostedt@xxxxxxxxxxx>
> CC: Nicholas Miell <nmiell@xxxxxxxxxxx>
> CC: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
> CC: Ingo Molnar <mingo@xxxxxxxxxx>
> CC: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>
> CC: Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
> CC: Stephen Hemminger <stephen@xxxxxxxxxxxxxxxxxx>
> CC: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> CC: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
> CC: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
> CC: David Howells <dhowells@xxxxxxxxxx>
> CC: "Pranith Kumar" <bobby.prani@xxxxxxxxx>
> CC: Michael Kerrisk <mtk.manpages@xxxxxxxxx>
> ---
> MAINTAINERS | 8 ++++
> arch/x86/syscalls/syscall_32.tbl | 1 +
> arch/x86/syscalls/syscall_64.tbl | 1 +
> include/linux/syscalls.h | 2 +
> include/uapi/asm-generic/unistd.h | 4 ++-
> include/uapi/linux/Kbuild | 1 +
> include/uapi/linux/membarrier.h | 53 +++++++++++++++++++++++++++++
> init/Kconfig | 12 +++++++
> kernel/Makefile | 1 +
> kernel/membarrier.c | 66 +++++++++++++++++++++++++++++++++++++
> kernel/sys_ni.c | 3 ++
> 11 files changed, 151 insertions(+), 1 deletions(-)
> create mode 100644 include/uapi/linux/membarrier.h
> create mode 100644 kernel/membarrier.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 781e099..fcb63d4 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -6370,6 +6370,14 @@ W: http://www.mellanox.com
> Q: http://patchwork.ozlabs.org/project/netdev/list/
> F: drivers/net/ethernet/mellanox/mlx4/en_*
>
> +MEMBARRIER SUPPORT
> +M: Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> +M: "Paul E. McKenney" <paulmck@xxxxxxxxxxxxxxxxxx>
> +L: linux-kernel@xxxxxxxxxxxxxxx
> +S: Supported
> +F: kernel/membarrier.c
> +F: include/uapi/linux/membarrier.h
> +
> MEMORY MANAGEMENT
> L: linux-mm@xxxxxxxxx
> W: http://www.linux-mm.org
> diff --git a/arch/x86/syscalls/syscall_32.tbl b/arch/x86/syscalls/syscall_32.tbl
> index ef8187f..e63ad61 100644
> --- a/arch/x86/syscalls/syscall_32.tbl
> +++ b/arch/x86/syscalls/syscall_32.tbl
> @@ -365,3 +365,4 @@
> 356 i386 memfd_create sys_memfd_create
> 357 i386 bpf sys_bpf
> 358 i386 execveat sys_execveat stub32_execveat
> +359 i386 membarrier sys_membarrier
> diff --git a/arch/x86/syscalls/syscall_64.tbl b/arch/x86/syscalls/syscall_64.tbl
> index 9ef32d5..87f3cd6 100644
> --- a/arch/x86/syscalls/syscall_64.tbl
> +++ b/arch/x86/syscalls/syscall_64.tbl
> @@ -329,6 +329,7 @@
> 320 common kexec_file_load sys_kexec_file_load
> 321 common bpf sys_bpf
> 322 64 execveat stub_execveat
> +323 common membarrier sys_membarrier
>
> #
> # x32-specific system call numbers start at 512 to avoid cache impact
> diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
> index 76d1e38..51a9054 100644
> --- a/include/linux/syscalls.h
> +++ b/include/linux/syscalls.h
> @@ -884,4 +884,6 @@ asmlinkage long sys_execveat(int dfd, const char __user *filename,
> const char __user *const __user *argv,
> const char __user *const __user *envp, int flags);
>
> +asmlinkage long sys_membarrier(int cmd, int flags);
> +
> #endif
> diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
> index e016bd9..8da542a 100644
> --- a/include/uapi/asm-generic/unistd.h
> +++ b/include/uapi/asm-generic/unistd.h
> @@ -709,9 +709,11 @@ __SYSCALL(__NR_memfd_create, sys_memfd_create)
> __SYSCALL(__NR_bpf, sys_bpf)
> #define __NR_execveat 281
> __SC_COMP(__NR_execveat, sys_execveat, compat_sys_execveat)
> +#define __NR_membarrier 282
> +__SYSCALL(__NR_membarrier, sys_membarrier)
>
> #undef __NR_syscalls
> -#define __NR_syscalls 282
> +#define __NR_syscalls 283
>
> /*
> * All syscalls below here should go away really,
> diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
> index 1a0006a..7bcc827 100644
> --- a/include/uapi/linux/Kbuild
> +++ b/include/uapi/linux/Kbuild
> @@ -250,6 +250,7 @@ header-y += mdio.h
> header-y += media.h
> header-y += media-bus-format.h
> header-y += mei.h
> +header-y += membarrier.h
> header-y += memfd.h
> header-y += mempolicy.h
> header-y += meye.h
> diff --git a/include/uapi/linux/membarrier.h b/include/uapi/linux/membarrier.h
> new file mode 100644
> index 0000000..e0b108b
> --- /dev/null
> +++ b/include/uapi/linux/membarrier.h
> @@ -0,0 +1,53 @@
> +#ifndef _UAPI_LINUX_MEMBARRIER_H
> +#define _UAPI_LINUX_MEMBARRIER_H
> +
> +/*
> + * linux/membarrier.h
> + *
> + * membarrier system call API
> + *
> + * Copyright (c) 2010, 2015 Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> + *
> + * Permission is hereby granted, free of charge, to any person obtaining a copy
> + * of this software and associated documentation files (the "Software"), to deal
> + * in the Software without restriction, including without limitation the rights
> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
> + * copies of the Software, and to permit persons to whom the Software is
> + * furnished to do so, subject to the following conditions:
> + *
> + * The above copyright notice and this permission notice shall be included in
> + * all copies or substantial portions of the Software.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
> + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
> + * SOFTWARE.
> + */
> +
> +/**
> + * enum membarrier_cmd - membarrier system call command
> + * @MEMBARRIER_CMD_QUERY: Query the set of supported commands. It returns
> + * a bitmask of valid commands.
> + * @MEMBARRIER_CMD_SHARED: Execute a memory barrier on all running threads.
> + * Upon return from system call, the caller thread
> + * is ensured that all running threads have passed
> + * through a state where all memory accesses to
> + * user-space addresses match program order between
> + * entry to and return from the system call
> + * (non-running threads are de facto in such a
> + * state). This covers threads from all processes
> + * running on the system. This command returns 0.
> + *
> + * Command to be passed to the membarrier system call. The commands need to
> + * be a single bit each, except for MEMBARRIER_CMD_QUERY which is assigned to
> + * the value 0.
> + */
> +enum membarrier_cmd {
> + MEMBARRIER_CMD_QUERY = 0,
> + MEMBARRIER_CMD_SHARED = (1 << 0),
> +};
> +
> +#endif /* _UAPI_LINUX_MEMBARRIER_H */
> diff --git a/init/Kconfig b/init/Kconfig
> index dc24dec..307e406 100644
> --- a/init/Kconfig
> +++ b/init/Kconfig
> @@ -1583,6 +1583,18 @@ config PCI_QUIRKS
> bugs/quirks. Disable this only if your target machine is
> unaffected by PCI quirks.
>
> +config MEMBARRIER
> + bool "Enable membarrier() system call" if EXPERT
> + default y
> + help
> + Enable the membarrier() system call that allows issuing memory
> + barriers across all running threads, which can be used to distribute
> + the cost of user-space memory barriers asymmetrically by transforming
> + pairs of memory barriers into pairs consisting of membarrier() and a
> + compiler barrier.
> +
> + If unsure, say Y.
> +
> config EMBEDDED
> bool "Embedded system"
> option allnoconfig_y
> diff --git a/kernel/Makefile b/kernel/Makefile
> index 60c302c..05191fd 100644
> --- a/kernel/Makefile
> +++ b/kernel/Makefile
> @@ -98,6 +98,7 @@ obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
> obj-$(CONFIG_JUMP_LABEL) += jump_label.o
> obj-$(CONFIG_CONTEXT_TRACKING) += context_tracking.o
> obj-$(CONFIG_TORTURE_TEST) += torture.o
> +obj-$(CONFIG_MEMBARRIER) += membarrier.o
>
> $(obj)/configs.o: $(obj)/config_data.h
>
> diff --git a/kernel/membarrier.c b/kernel/membarrier.c
> new file mode 100644
> index 0000000..a20b279
> --- /dev/null
> +++ b/kernel/membarrier.c
> @@ -0,0 +1,66 @@
> +/*
> + * Copyright (C) 2010, 2015 Mathieu Desnoyers <mathieu.desnoyers@xxxxxxxxxxxx>
> + *
> + * membarrier system call
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/syscalls.h>
> +#include <linux/membarrier.h>
> +
> +/*
> + * Bitmask made from a "or" of all commands within enum membarrier_cmd,
> + * except MEMBARRIER_CMD_QUERY.
> + */
> +#define MEMBARRIER_CMD_BITMASK (MEMBARRIER_CMD_SHARED)
> +
> +/**
> + * sys_membarrier - issue memory barriers on a set of threads
> + * @cmd: Takes command values defined in enum membarrier_cmd.
> + * @flags: Currently needs to be 0. For future extensions.
> + *
> + * If this system call is not implemented, -ENOSYS is returned. If the
> + * command specified does not exist, or if the command argument is invalid,
> + * this system call returns -EINVAL. For a given command, with flags argument
> + * set to 0, this system call is guaranteed to always return the same value
> + * until reboot.
> + *
> + * All memory accesses performed in program order from each targeted thread
> + * is guaranteed to be ordered with respect to sys_membarrier(). If we use
> + * the semantic "barrier()" to represent a compiler barrier forcing memory
> + * accesses to be performed in program order across the barrier, and
> + * smp_mb() to represent explicit memory barriers forcing full memory
> + * ordering across the barrier, we have the following ordering table for
> + * each pair of barrier(), sys_membarrier() and smp_mb():
> + *
> + * The pair ordering is detailed as (O: ordered, X: not ordered):
> + *
> + * barrier() smp_mb() sys_membarrier()
> + * barrier() X X O
> + * smp_mb() X O O
> + * sys_membarrier() O O O
> + */
> +SYSCALL_DEFINE2(membarrier, int, cmd, int, flags)
> +{
> + if (flags)
> + return -EINVAL;
> + switch (cmd) {
> + case MEMBARRIER_CMD_QUERY:
> + return MEMBARRIER_CMD_BITMASK;
> + case MEMBARRIER_CMD_SHARED:
> + if (num_online_cpus() > 1)
> + synchronize_sched();
> + return 0;
> + default:
> + return -EINVAL;
> + }
> +}
> diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
> index 7995ef5..eb4fde0 100644
> --- a/kernel/sys_ni.c
> +++ b/kernel/sys_ni.c
> @@ -243,3 +243,6 @@ cond_syscall(sys_bpf);
>
> /* execveat */
> cond_syscall(sys_execveat);
> +
> +/* membarrier */
> +cond_syscall(sys_membarrier);
> --
> 1.7.7.3
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/