[PATCH 07/12] net: axienet: Fix comments blocks

From: Michal Simek
Date: Tue May 05 2015 - 05:29:16 EST

There is rule for network drivers with comments blocks
which is newly checked by checkpatch.pl script.
Let's fix it.

Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
---

drivers/net/ethernet/xilinx/xilinx_axienet.h | 93 ++++++++++++-----------
drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 34 +++++----
drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c | 3 +-
3 files changed, 71 insertions(+), 59 deletions(-)

diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet.h b/drivers/net/ethernet/xilinx/xilinx_axienet.h
index 4e309440964a..2aa6857f930e 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet.h
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet.h
@@ -38,18 +38,21 @@
#define XAE_OPTION_FLOW_CONTROL (1 << 4)

/* Strip FCS and PAD from incoming frames. Note: PAD from VLAN frames is not
- * stripped. Default: disabled (set) */
+ * stripped. Default: disabled (set)
+ */
#define XAE_OPTION_FCS_STRIP (1 << 5)

/* Generate FCS field and add PAD automatically for outgoing frames.
- * Default: enabled (set) */
+ * Default: enabled (set)
+ */
#define XAE_OPTION_FCS_INSERT (1 << 6)

/* Enable Length/Type error checking for incoming frames. When this option is
* set, the MAC will filter frames that have a mismatched type/length field
* and if XAE_OPTION_REPORT_RXERR is set, the user is notified when these
* types of frames are encountered. When this option is cleared, the MAC will
- * allow these types of frames to be received. Default: enabled (set) */
+ * allow these types of frames to be received. Default: enabled (set)
+ */
#define XAE_OPTION_LENTYPE_ERR (1 << 7)

/* Enable the transmitter. Default: enabled (set) */
@@ -159,12 +162,12 @@
#define XAE_MDIO_MWD_OFFSET 0x00000508 /* MII Management Write Data */
#define XAE_MDIO_MRD_OFFSET 0x0000050C /* MII Management Read Data */
#define XAE_MDIO_MIS_OFFSET 0x00000600 /* MII Management Interrupt Status */
-#define XAE_MDIO_MIP_OFFSET 0x00000620 /* MII Mgmt Interrupt Pending
- * register offset */
-#define XAE_MDIO_MIE_OFFSET 0x00000640 /* MII Management Interrupt Enable
- * register offset */
-#define XAE_MDIO_MIC_OFFSET 0x00000660 /* MII Management Interrupt Clear
- * register offset. */
+/* MII Mgmt Interrupt Pending register offset */
+#define XAE_MDIO_MIP_OFFSET 0x00000620
+/* MII Management Interrupt Enable register offset */
+#define XAE_MDIO_MIE_OFFSET 0x00000640
+/* MII Management Interrupt Clear register offset. */
+#define XAE_MDIO_MIC_OFFSET 0x00000660
#define XAE_UAW0_OFFSET 0x00000700 /* Unicast address word 0 */
#define XAE_UAW1_OFFSET 0x00000704 /* Unicast address word 1 */
#define XAE_FMI_OFFSET 0x00000708 /* Filter Mask Index */
@@ -176,18 +179,17 @@
#define XAE_MCAST_TABLE_OFFSET 0x00020000 /* Multicast table address */

/* Bit Masks for Axi Ethernet RAF register */
-#define XAE_RAF_MCSTREJ_MASK 0x00000002 /* Reject receive multicast
- * destination address */
-#define XAE_RAF_BCSTREJ_MASK 0x00000004 /* Reject receive broadcast
- * destination address */
+/* Reject receive multicast destination address */
+#define XAE_RAF_MCSTREJ_MASK 0x00000002
+/* Reject receive broadcast destination address */
+#define XAE_RAF_BCSTREJ_MASK 0x00000004
#define XAE_RAF_TXVTAGMODE_MASK 0x00000018 /* Tx VLAN TAG mode */
#define XAE_RAF_RXVTAGMODE_MASK 0x00000060 /* Rx VLAN TAG mode */
#define XAE_RAF_TXVSTRPMODE_MASK 0x00000180 /* Tx VLAN STRIP mode */
#define XAE_RAF_RXVSTRPMODE_MASK 0x00000600 /* Rx VLAN STRIP mode */
#define XAE_RAF_NEWFNCENBL_MASK 0x00000800 /* New function mode */
-#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000 /* Exteneded Multicast
- * Filtering mode
- */
+/* Exteneded Multicast Filtering mode */
+#define XAE_RAF_EMULTIFLTRENBL_MASK 0x00001000
#define XAE_RAF_STATSRST_MASK 0x00002000 /* Stats. Counter Reset */
#define XAE_RAF_RXBADFRMEN_MASK 0x00004000 /* Recv Bad Frame Enable */
#define XAE_RAF_TXVTAGMODE_SHIFT 3 /* Tx Tag mode shift bits */
@@ -197,15 +199,16 @@

/* Bit Masks for Axi Ethernet TPF and IFGP registers */
#define XAE_TPF_TPFV_MASK 0x0000FFFF /* Tx pause frame value */
-#define XAE_IFGP0_IFGP_MASK 0x0000007F /* Transmit inter-frame
- * gap adjustment value */
+/* Transmit inter-frame gap adjustment value */
+#define XAE_IFGP0_IFGP_MASK 0x0000007F

/* Bit Masks for Axi Ethernet IS, IE and IP registers, Same masks apply
- * for all 3 registers. */
-#define XAE_INT_HARDACSCMPLT_MASK 0x00000001 /* Hard register access
- * complete */
-#define XAE_INT_AUTONEG_MASK 0x00000002 /* Auto negotiation
- * complete */
+ * for all 3 registers.
+ */
+/* Hard register access complete */
+#define XAE_INT_HARDACSCMPLT_MASK 0x00000001
+/* Auto negotiation complete */
+#define XAE_INT_AUTONEG_MASK 0x00000002
#define XAE_INT_RXCMPIT_MASK 0x00000004 /* Rx complete */
#define XAE_INT_RXRJECT_MASK 0x00000008 /* Rx frame rejected */
#define XAE_INT_RXFIFOOVR_MASK 0x00000010 /* Rx fifo overrun */
@@ -215,10 +218,9 @@
#define XAE_INT_PHYRSTCMPLT_MASK 0x00000100 /* Phy Reset complete */
#define XAE_INT_ALL_MASK 0x0000003F /* All the ints */

+/* INT bits that indicate receive errors */
#define XAE_INT_RECV_ERROR_MASK \
- (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK) /* INT bits that
- * indicate receive
- * errors */
+ (XAE_INT_RXRJECT_MASK | XAE_INT_RXFIFOOVR_MASK)

/* Bit masks for Axi Ethernet VLAN TPID Word 0 register */
#define XAE_TPID_0_MASK 0x0000FFFF /* TPID 0 */
@@ -231,27 +233,28 @@
/* Bit masks for Axi Ethernet RCW1 register */
#define XAE_RCW1_RST_MASK 0x80000000 /* Reset */
#define XAE_RCW1_JUM_MASK 0x40000000 /* Jumbo frame enable */
-#define XAE_RCW1_FCS_MASK 0x20000000 /* In-Band FCS enable
- * (FCS not stripped) */
+/* In-Band FCS enable (FCS not stripped) */
+#define XAE_RCW1_FCS_MASK 0x20000000
#define XAE_RCW1_RX_MASK 0x10000000 /* Receiver enable */
#define XAE_RCW1_VLAN_MASK 0x08000000 /* VLAN frame enable */
-#define XAE_RCW1_LT_DIS_MASK 0x02000000 /* Length/type field valid check
- * disable */
-#define XAE_RCW1_CL_DIS_MASK 0x01000000 /* Control frame Length check
- * disable */
-#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF /* Pause frame source address
- * bits [47:32]. Bits [31:0] are
- * stored in register RCW0 */
+/* Length/type field valid check disable */
+#define XAE_RCW1_LT_DIS_MASK 0x02000000
+/* Control frame Length check disable */
+#define XAE_RCW1_CL_DIS_MASK 0x01000000
+/* Pause frame source address bits [47:32]. Bits [31:0] are
+ * stored in register RCW0
+ */
+#define XAE_RCW1_PAUSEADDR_MASK 0x0000FFFF

/* Bit masks for Axi Ethernet TC register */
#define XAE_TC_RST_MASK 0x80000000 /* Reset */
#define XAE_TC_JUM_MASK 0x40000000 /* Jumbo frame enable */
-#define XAE_TC_FCS_MASK 0x20000000 /* In-Band FCS enable
- * (FCS not generated) */
+/* In-Band FCS enable (FCS not generated) */
+#define XAE_TC_FCS_MASK 0x20000000
#define XAE_TC_TX_MASK 0x10000000 /* Transmitter enable */
#define XAE_TC_VLAN_MASK 0x08000000 /* VLAN frame enable */
-#define XAE_TC_IFG_MASK 0x02000000 /* Inter-frame gap adjustment
- * enable */
+/* Inter-frame gap adjustment enable */
+#define XAE_TC_IFG_MASK 0x02000000

/* Bit masks for Axi Ethernet FCC register */
#define XAE_FCC_FCRX_MASK 0x20000000 /* Rx flow control enable */
@@ -301,10 +304,10 @@
#define XAE_MDIO_INT_MIIM_RDY_MASK 0x00000001 /* MIIM Interrupt */

/* Bit masks for Axi Ethernet UAW1 register */
-#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF /* Station address bits
- * [47:32]; Station address
- * bits [31:0] are stored in
- * register UAW0 */
+/* Station address bits [47:32]; Station address
+ * bits [31:0] are stored in register UAW0
+ */
+#define XAE_UAW1_UNICASTADDR_MASK 0x0000FFFF

/* Bit masks for Axi Ethernet FMI register */
#define XAE_FMI_PM_MASK 0x80000000 /* Promis. mode enable */
@@ -320,8 +323,8 @@
#define XAE_PHY_TYPE_SGMII 4
#define XAE_PHY_TYPE_1000BASE_X 5

-#define XAE_MULTICAST_CAM_TABLE_NUM 4 /* Total number of entries in the
- * hardware multicast table. */
+ /* Total number of entries in the hardware multicast table. */
+#define XAE_MULTICAST_CAM_TABLE_NUM 4

/* Axi Ethernet Synthesis features */
#define XAE_FEATURE_PARTIAL_RX_CSUM (1 << 0)
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
index 39bb2e93cc65..ddaa07a0bf51 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
@@ -198,9 +198,7 @@ static int axienet_dma_bd_init(struct net_device *ndev)
lp->tx_bd_tail = 0;
lp->rx_bd_ci = 0;

- /*
- * Allocate the Tx and Rx buffer descriptors.
- */
+ /* Allocate the Tx and Rx buffer descriptors. */
lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent,
sizeof(*lp->tx_bd_v) * TX_BD_NUM,
&lp->tx_bd_p, GFP_KERNEL);
@@ -263,7 +261,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

/* Populate the tail pointer and bring the Rx Axi DMA engine out of
- * halted state. This will make the Rx side ready for reception.*/
+ * halted state. This will make the Rx side ready for reception.
+ */
axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -273,7 +272,8 @@ static int axienet_dma_bd_init(struct net_device *ndev)

/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
- * tail pointer register that the Tx channel will start transmitting */
+ * tail pointer register that the Tx channel will start transmitting.
+ */
axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -354,7 +354,8 @@ static void axienet_set_multicast_list(struct net_device *ndev)
netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) {
/* We must make the kernel realize we had to move into
* promiscuous mode. If it was a promiscuous mode request
- * the flag is already set. If not we set it. */
+ * the flag is already set. If not we set it.
+ */
ndev->flags |= IFF_PROMISC;
reg = axienet_ior(lp, XAE_FMI_OFFSET);
reg |= XAE_FMI_PM_MASK;
@@ -438,7 +439,8 @@ static void __axienet_device_reset(struct axienet_local *lp,
/* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset
* process of Axi DMA takes a while to complete as all pending
* commands/transfers will be flushed or completed during this
- * reset process. */
+ * reset process.
+ */
axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK);
timeout = DELAY_OF_ONE_MILLISEC;
while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) {
@@ -499,7 +501,8 @@ static void axienet_device_reset(struct net_device *ndev)
axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

/* Sync default options with HW but leave receiver and
- * transmitter disabled.*/
+ * transmitter disabled.
+ */
axienet_setoptions(ndev, lp->options &
~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
axienet_set_mac_address(ndev, NULL);
@@ -919,7 +922,8 @@ static int axienet_open(struct net_device *ndev)
/* Disable the MDIO interface till Axi Ethernet Reset is completed.
* When we do an Axi Ethernet reset, it resets the complete core
* including the MDIO. If MDIO is not disabled when the reset
- * process is started, MDIO will be broken afterwards. */
+ * process is started, MDIO will be broken afterwards.
+ */
axienet_iow(lp, XAE_MDIO_MC_OFFSET,
(mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK)));
axienet_device_reset(ndev);
@@ -1365,7 +1369,8 @@ static void axienet_dma_err_handler(unsigned long data)
/* Disable the MDIO interface till Axi Ethernet Reset is completed.
* When we do an Axi Ethernet reset, it resets the complete core
* including the MDIO. So if MDIO is not disabled when the reset
- * process is started, MDIO will be broken afterwards. */
+ * process is started, MDIO will be broken afterwards.
+ */
axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg &
~XAE_MDIO_MC_MDIOEN_MASK));

@@ -1436,7 +1441,8 @@ static void axienet_dma_err_handler(unsigned long data)
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr);

/* Populate the tail pointer and bring the Rx Axi DMA engine out of
- * halted state. This will make the Rx side ready for reception.*/
+ * halted state. This will make the Rx side ready for reception.
+ */
axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET,
@@ -1446,7 +1452,8 @@ static void axienet_dma_err_handler(unsigned long data)

/* Write to the RS (Run-stop) bit in the Tx channel control register.
* Tx channel is now ready to run. But only after we write to the
- * tail pointer register that the Tx channel will start transmitting */
+ * tail pointer register that the Tx channel will start transmitting
+ */
axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p);
cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET);
axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET,
@@ -1462,7 +1469,8 @@ static void axienet_dma_err_handler(unsigned long data)
axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK);

/* Sync default options with HW but leave receiver and
- * transmitter disabled.*/
+ * transmitter disabled.
+ */
axienet_setoptions(ndev, lp->options &
~(XAE_OPTION_TXEN | XAE_OPTION_RXEN));
axienet_set_mac_address(ndev, NULL);
diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
index fce557518b7d..315136db37c9 100644
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_mdio.c
@@ -183,7 +183,8 @@ int axienet_mdio_setup(struct axienet_local *lp, struct device_node *np)
clk_div = (host_clock / (MAX_MDIO_FREQ * 2)) - 1;
/* If there is any remainder from the division of
* fHOST / (MAX_MDIO_FREQ * 2), then we need to add
- * 1 to the clock divisor or we will surely be above 2.5 MHz */
+ * 1 to the clock divisor or we will surely be above 2.5 MHz
+ */
if (host_clock % (MAX_MDIO_FREQ * 2))
clk_div++;

--
2.3.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/