[PATCH] mmc: atmel-mci: fix bad variable type for clkdiv

[Ludovic Desroches]

clkdiv is declared as an u32 but it can be set to a negative value
causing a huge divisor value. Change its type to int to avoid this case.

Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 3.4 and later
---
 drivers/mmc/host/atmel-mci.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 03d7c75..9a39e0b 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -1304,7 +1304,7 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 
 	if (ios->clock) {
 		unsigned int clock_min = ~0U;
-		u32 clkdiv;
+		int clkdiv;
 
 		spin_lock_bh(&host->lock);
 		if (!host->mode_reg) {
@@ -1328,7 +1328,12 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 		/* Calculate clock divider */
 		if (host->caps.has_odd_clk_div) {
 			clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
-			if (clkdiv > 511) {
+			if (clkdiv < 0) {
+				dev_warn(&mmc->class_dev,
+					 "clock %u too fast; using %lu\n",
+					 clock_min, host->bus_hz / 2);
+				clkdiv = 0;
+			} else if (clkdiv > 511) {
 				dev_warn(&mmc->class_dev,
 				         "clock %u too slow; using %lu\n",
 				         clock_min, host->bus_hz / (511 + 2));
-- 
2.2.0

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/