Re: [PATCH v4 19/20] clk: tegra210: add support for Tegra210 clocks
From: Jim Lin
Date: Thu May 07 2015 - 06:39:31 EST
On 05/05/2015 12:37 AM, Rhyland Klein wrote:
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
new file mode 100644
index 000000000000..07382a473e22
--- /dev/null
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -0,0 +1,2761 @@
+/*
+ * Copyright (c) 2012-2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/clk/tegra.h>
+#include <dt-bindings/clock/tegra210-car.h>
+
+#include "clk.h"
+#include "clk-id.h"
+
+/*
+ * TEGRA210_CAR_BANK_COUNT: the number of peripheral clock register
+ * banks present in the Tegra210 CAR IP block. The banks are
+ * identified by single letters, e.g.: L, H, U, V, W, X, Y. See
+ * periph_regs[] in drivers/clk/tegra/clk.c
+ */
+#define TEGRA210_CAR_BANK_COUNT 7
+
+#define CLK_SOURCE_CSITE 0x1d4
+#define CLK_SOURCE_EMC 0x19c
+
+#define PLLC_BASE 0x80
+#define PLLC_OUT 0x84
+#define PLLC_MISC0 0x88
+#define PLLC_MISC1 0x8c
+#define PLLC_MISC2 0x5d0
+#define PLLC_MISC3 0x5d4
+
+#define PLLC2_BASE 0x4e8
+#define PLLC2_MISC0 0x4ec
+#define PLLC2_MISC1 0x4f0
+#define PLLC2_MISC2 0x4f4
+#define PLLC2_MISC3 0x4f8
+
+#define PLLC3_BASE 0x4fc
+#define PLLC3_MISC0 0x500
+#define PLLC3_MISC1 0x504
+#define PLLC3_MISC2 0x508
+#define PLLC3_MISC3 0x50c
+
+#define PLLM_BASE 0x90
+#define PLLM_MISC0 0x9c
+#define PLLM_MISC1 0x98
+#define PLLP_BASE 0xa0
+#define PLLP_MISC0 0xac
+#define PLLP_MISC1 0x680
+#define PLLA_BASE 0xb0
+#define PLLA_MISC0 0xbc
+#define PLLA_MISC1 0xb8
+#define PLLA_MISC2 0x5d8
+#define PLLD_BASE 0xd0
+#define PLLD_MISC0 0xdc
+#define PLLD_MISC1 0xd8
+#define PLLU_BASE 0xc0
+#define PLLU_OUTA 0xc4
+#define PLLU_MISC0 0xcc
+#define PLLU_MISC1 0xc8
+#define PLLX_BASE 0xe0
+#define PLLX_MISC0 0xe4
+#define PLLX_MISC1 0x510
+#define PLLX_MISC2 0x514
+#define PLLX_MISC3 0x518
+#define PLLX_MISC4 0x5f0
+#define PLLX_MISC5 0x5f4
+#define PLLE_BASE 0xe8
+#define PLLE_MISC0 0xec
+#define PLLD2_BASE 0x4b8
+#define PLLD2_MISC0 0x4bc
+#define PLLD2_MISC1 0x570
+#define PLLD2_MISC2 0x574
+#define PLLD2_MISC3 0x578
+#define PLLE_AUX 0x48c
+#define PLLRE_BASE 0x4c4
+#define PLLRE_MISC0 0x4c8
+#define PLLDP_BASE 0x590
+#define PLLDP_MISC 0x594
+
+#define PLLC4_BASE 0x5a4
+#define PLLC4_MISC0 0x5a8
+#define PLLC4_OUT 0x5e4
+#define PLLMB_BASE 0x5e8
+#define PLLMB_MISC0 0x5ec
+#define PLLA1_BASE 0x6a4
+#define PLLA1_MISC0 0x6a8
+#define PLLA1_MISC1 0x6ac
+#define PLLA1_MISC2 0x6b0
+#define PLLA1_MISC3 0x6b4
+
+#define PLLU_IDDQ_BIT 31
+#define PLLCX_IDDQ_BIT 27
+#define PLLRE_IDDQ_BIT 24
+#define PLLA_IDDQ_BIT 25
+#define PLLD_IDDQ_BIT 20
+#define PLLSS_IDDQ_BIT 18
+#define PLLM_IDDQ_BIT 5
+#define PLLMB_IDDQ_BIT 17
+#define PLLXP_IDDQ_BIT 3
+
+#define PLLCX_RESET_BIT 30
+
+#define PLL_BASE_LOCK BIT(27)
+#define PLLCX_BASE_LOCK BIT(26)
+#define PLLE_MISC_LOCK BIT(11)
+#define PLLRE_MISC_LOCK BIT(27)
+
+#define PLL_MISC_LOCK_ENABLE 18
+#define PLLC_MISC_LOCK_ENABLE 24
+#define PLLDU_MISC_LOCK_ENABLE 22
+#define PLLU_MISC_LOCK_ENABLE 29
+#define PLLE_MISC_LOCK_ENABLE 9
+#define PLLRE_MISC_LOCK_ENABLE 30
+#define PLLSS_MISC_LOCK_ENABLE 30
+#define PLLP_MISC_LOCK_ENABLE 18
+#define PLLM_MISC_LOCK_ENABLE 4
+#define PLLMB_MISC_LOCK_ENABLE 16
+#define PLLA_MISC_LOCK_ENABLE 28
+#define PLLU_MISC_LOCK_ENABLE 29
+#define PLLD_MISC_LOCK_ENABLE 18
+
+#define PLLA_SDM_DIN_MASK 0xffff
+#define PLLA_SDM_EN_MASK BIT(26)
+
+#define PLLD_SDM_EN_MASK BIT(16)
+
+#define PLLD2_SDM_EN_MASK BIT(31)
+#define PLLD2_SSC_EN_MASK BIT(30)
+
+#define PLLDP_SS_CFG 0x598
+#define PLLDP_SDM_EN_MASK BIT(31)
+#define PLLDP_SSC_EN_MASK BIT(30)
+#define PLLDP_SS_CTRL1 0x59c
+#define PLLDP_SS_CTRL2 0x5a0
+
+#define PMC_PLLM_WB0_OVERRIDE 0x1dc
+#define PMC_PLLM_WB0_OVERRIDE_2 0x2b0
+
+#define UTMIP_PLL_CFG2 0x488
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xffff) << 6)
This line should be corrected as
+#define UTMIP_PLL_CFG2_STABLE_COUNT(x) (((x) & 0xfff) << 6)
STABLE_COUNT has 12 bits.
+#define UTMIP_PLL_CFG2_ACTIVE_DLY_COUNT(x) (((x) & 0x3f) << 18)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_A_POWERDOWN BIT(0)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_B_POWERDOWN BIT(2)
+#define UTMIP_PLL_CFG2_FORCE_PD_SAMP_C_POWERDOWN BIT(4)
+
+#define UTMIP_PLL_CFG1 0x484
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 6)
This line should be corrected as
+#define UTMIP_PLL_CFG1_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27)
ENABLE_DLY_COUNT starts from bit 27.
--nvpublic
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/