Re: [PATCH v9] iio: acpi: Add support for ACPI0008 Ambient Light Sensor

From: Jonathan Cameron
Date: Fri May 08 2015 - 17:34:51 EST

Next message: Fenghua Yu: "[PATCH v3 Bugfix 0/6] xstate/fpu bug fixes"
Previous message: Andrew Morton: "Re: [PATCH try #4] proc: fix PAGE_SIZE limit of /proc/$PID/cmdline"
In reply to: Gabriele Mazzotta: "Re: [PATCH v9] iio: acpi: Add support for ACPI0008 Ambient Light Sensor"
Next in thread: Marek Vasut: "Re: [PATCH v9] iio: acpi: Add support for ACPI0008 Ambient Light Sensor"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 8 May 2015 20:20:33 BST, Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx> wrote:
>On Friday 08 May 2015 10:58:29 Jonathan Cameron wrote:
>> On 02/05/15 08:30, Gabriele Mazzotta wrote:
>> > This driver adds the initial support for the ACPI Ambient Light
>Sensor
>> > as defined in Section 9.2 of the ACPI specification (Revision 5.0)
>[1].
>> >
>> > Sensors complying with the standard are exposed as ACPI devices
>with
>> > ACPI0008 as hardware ID and provide standard methods by which the
>OS
>> > can query properties of the ambient light environment the system is
>> > currently operating in.
>> >
>> > This driver currently allows only to get the current ambient light
>> > illuminance reading through the _ALI method, but is ready to be
>> > extended extended to handle _ALC, _ALT and _ALP as well.
>> >
>> > [1] http://www.acpi.info/DOWNLOADS/ACPIspec50.pdf
>> >
>> > Signed-off-by: Martin Liska <marxin.liska@xxxxxxxxx>
>> > Signed-off-by: Marek Vasut <marex@xxxxxxx>
>> > Signed-off-by: Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
>> > Cc: Zhang Rui <rui.zhang@xxxxxxxxx>
>> Sorry, one last point inline that I missed before!
>>
>> (just noticed it when taking a last glance before applying the
>patch).
>>
>> Jonathan
>> > ---
>> > Changes since v8:
>> > - Set realbits to 32
>> > - Fix license mismatch (using GPL v2 or later)
>> > - Drop iio_device_unregister() in favor of
>devm_iio_device_register()
>> >
>> > drivers/iio/light/Kconfig | 12 +++
>> > drivers/iio/light/Makefile | 1 +
>> > drivers/iio/light/acpi-als.c | 232
>+++++++++++++++++++++++++++++++++++++++++++
>> > 3 files changed, 245 insertions(+)
>> > create mode 100644 drivers/iio/light/acpi-als.c
>> >
>> > diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
>> > index 01a1a16..898b2b5 100644
>> > --- a/drivers/iio/light/Kconfig
>> > +++ b/drivers/iio/light/Kconfig
>> > @@ -5,6 +5,18 @@
>> >
>> > menu "Light sensors"
>> >
>> > +config ACPI_ALS
>> > + tristate "ACPI Ambient Light Sensor"
>> > + depends on ACPI
>> > + select IIO_TRIGGERED_BUFFER
>> > + select IIO_KFIFO_BUF
>> > + help
>> > + Say Y here if you want to build a driver for the ACPI0008
>> > + Ambient Light Sensor.
>> > +
>> > + To compile this driver as a module, choose M here: the module
>will
>> > + be called acpi-als.
>> > +
>> > config ADJD_S311
>> > tristate "ADJD-S311-CR999 digital color sensor"
>> > select IIO_BUFFER
>> > diff --git a/drivers/iio/light/Makefile
>b/drivers/iio/light/Makefile
>> > index ad7c30f..d9aad52a 100644
>> > --- a/drivers/iio/light/Makefile
>> > +++ b/drivers/iio/light/Makefile
>> > @@ -3,6 +3,7 @@
>> > #
>> >
>> > # When adding new entries keep the list in alphabetical order
>> > +obj-$(CONFIG_ACPI_ALS) += acpi-als.o
>> > obj-$(CONFIG_ADJD_S311) += adjd_s311.o
>> > obj-$(CONFIG_AL3320A) += al3320a.o
>> > obj-$(CONFIG_APDS9300) += apds9300.o
>> > diff --git a/drivers/iio/light/acpi-als.c
>b/drivers/iio/light/acpi-als.c
>> > new file mode 100644
>> > index 0000000..9839c9a
>> > --- /dev/null
>> > +++ b/drivers/iio/light/acpi-als.c
>> > @@ -0,0 +1,232 @@
>> > +/*
>> > + * ACPI Ambient Light Sensor Driver
>> > + *
>> > + * Based on ALS driver:
>> > + * Copyright (C) 2009 Zhang Rui <rui.zhang@xxxxxxxxx>
>> > + *
>> > + * Rework for IIO subsystem:
>> > + * Copyright (C) 2012-2013 Martin Liska <marxin.liska@xxxxxxxxx>
>> > + *
>> > + * Final cleanup and debugging:
>> > + * Copyright (C) 2013-2014 Marek Vasut <marex@xxxxxxx>
>> > + * Copyright (C) 2015 Gabriele Mazzotta <gabriele.mzt@xxxxxxxxx>
>> > + *
>> > + * This program is free software; you can redistribute it and/or
>modify it
>> > + * under the terms of the GNU General Public License as published
>by the
>> > + * Free Software Foundation; either version 2 of the License, or
>(at your
>> > + * option) any later version.
>> > + *
>> > + * This program is distributed in the hope that it will be useful,
>but
>> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
>> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>GNU
>> > + * General Public License for more details.
>> > + *
>> > + * You should have received a copy of the GNU General Public
>License along
>> > + * with this program; if not, write to the Free Software
>Foundation, Inc.,
>> > + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
>> > + */
>> > +
>> > +#include <linux/module.h>
>> > +#include <linux/acpi.h>
>> > +#include <linux/err.h>
>> > +#include <linux/mutex.h>
>> > +
>> > +#include <linux/iio/iio.h>
>> > +#include <linux/iio/buffer.h>
>> > +#include <linux/iio/kfifo_buf.h>
>> > +
>> > +#define ACPI_ALS_CLASS "als"
>> > +#define ACPI_ALS_DEVICE_NAME "acpi-als"
>> > +#define ACPI_ALS_NOTIFY_ILLUMINANCE 0x80
>> > +
>> > +ACPI_MODULE_NAME("acpi-als");
>> > +
>> > +/*
>> > + * So far, there's only one channel in here, but the specification
>for
>> > + * ACPI0008 says there can be more to what the block can report.
>Like
>> > + * chromaticity and such. We are ready for incoming additions!
>> > + */
>> > +static const struct iio_chan_spec acpi_als_channels[] = {
>> > + {
>> > + .type = IIO_LIGHT,
>> > + .scan_type = {
>> > + .sign = 's',
>> > + .realbits = 32,
>> > + .storagebits = 32,
>> > + },
>> > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
>> > + },
>> > +};
>> > +
>> > +/*
>> > + * The event buffer contains timestamp and all the data from
>> > + * the ACPI0008 block. There are multiple, but so far we only
>> > + * support _ALI (illuminance). Once someone adds new channels
>> > + * to acpi_als_channels[], the evt_buffer below will grow
>> > + * automatically.
>> > + */
>> > +#define EVT_NR_SOURCES ARRAY_SIZE(acpi_als_channels)
>> > +#define EVT_BUFFER_SIZE \
>> > + (sizeof(s64) + (EVT_NR_SOURCES * sizeof(s32)))
>> > +
>> > +struct acpi_als {
>> > + struct acpi_device *device;
>> > + struct mutex lock;
>> > +
>> > + s32 evt_buffer[EVT_BUFFER_SIZE];
>> > +};
>> > +
>> > +/*
>> > + * All types of properties the ACPI0008 block can report. The ALI,
>ALC, ALT
>> > + * and ALP can all be handled by als_read_value() below, while the
>ALR is
>> > + * special.
>> > + *
>> > + * The _ALR property returns tables that can be used to fine-tune
>the values
>> > + * reported by the other props based on the particular hardware
>type and it's
>> > + * location (it contains tables for "rainy", "bright inhouse
>lighting" etc.).
>> > + *
>> > + * So far, we support only ALI (illuminance).
>> > + */
>> > +#define ACPI_ALS_ILLUMINANCE "_ALI"
>> > +#define ACPI_ALS_CHROMATICITY "_ALC"
>> > +#define ACPI_ALS_COLOR_TEMP "_ALT"
>> > +#define ACPI_ALS_POLLING "_ALP"
>> > +#define ACPI_ALS_TABLES "_ALR"
>> > +
>> > +static int als_read_value(struct acpi_als *als, char *prop, s32
>*val)
>> > +{
>> > + unsigned long long temp_val;
>> > + acpi_status status;
>> > +
>> > + status = acpi_evaluate_integer(als->device->handle, prop, NULL,
>> > + &temp_val);
>> > +
>> > + if (ACPI_FAILURE(status)) {
>> > + ACPI_EXCEPTION((AE_INFO, status, "Error reading ALS %s", prop));
>> > + return -EIO;
>> > + }
>> > +
>> > + *val = temp_val;
>> > +
>> > + return 0;
>> > +}
>> > +
>> > +static void acpi_als_notify(struct acpi_device *device, u32 event)
>> > +{
>> > + struct iio_dev *indio_dev = acpi_driver_data(device);
>> > + struct acpi_als *als = iio_priv(indio_dev);
>> > + s32 *buffer = als->evt_buffer;
>> > + s64 time_ns = iio_get_time_ns();
>> > + s32 val;
>> > + int ret;
>> > +
>> > + mutex_lock(&als->lock);
>> > +
>> > + memset(buffer, 0, EVT_BUFFER_SIZE);
>> > +
>> > + switch (event) {
>> > + case ACPI_ALS_NOTIFY_ILLUMINANCE:
>> > + ret = als_read_value(als, ACPI_ALS_ILLUMINANCE, &val);
>> > + if (ret < 0)
>> > + goto out;
>> > + *buffer++ = val;
>> > + break;
>> > + default:
>> > + /* Unhandled event */
>> > + dev_dbg(&device->dev, "Unhandled ACPI ALS event (%08x)!\n",
>> > + event);
>> > + goto out;
>> > + }
>> > +
>> > + iio_push_to_buffers_with_timestamp(indio_dev,
>> > + (u8 *)als->evt_buffer, time_ns);
>> Why the u8* cast, the function takes a void * so there is no need to
>cast it.
>
>It was there in the previous submissions and I don't know if there was
>a reason for it, but I can't find one now.
>I must have missed it while updating the patch.
Don't worry about resending. I will fix it up when applying the patch.
>
>> > +
>> > +out:
>> > + mutex_unlock(&als->lock);
>> > +}
>> > +
>> > +static int acpi_als_read_raw(struct iio_dev *indio_dev,
>> > + struct iio_chan_spec const *chan, int *val,
>> > + int *val2, long mask)
>> > +{
>> > + struct acpi_als *als = iio_priv(indio_dev);
>> > + s32 temp_val;
>> > + int ret;
>> > +
>> > + if (mask != IIO_CHAN_INFO_RAW)
>> > + return -EINVAL;
>> > +
>> > + /* we support only illumination (_ALI) so far. */
>> > + if (chan->type != IIO_LIGHT)
>> > + return -EINVAL;
>> > +
>> > + ret = als_read_value(als, ACPI_ALS_ILLUMINANCE, &temp_val);
>> > + if (ret < 0)
>> > + return ret;
>> > +
>> > + *val = temp_val;
>> > +
>> > + return IIO_VAL_INT;
>> > +}
>> > +
>> > +static const struct iio_info acpi_als_info = {
>> > + .driver_module = THIS_MODULE,
>> > + .read_raw = acpi_als_read_raw,
>> > +};
>> > +
>> > +static int acpi_als_add(struct acpi_device *device)
>> > +{
>> > + struct acpi_als *als;
>> > + struct iio_dev *indio_dev;
>> > + struct iio_buffer *buffer;
>> > +
>> > + indio_dev = devm_iio_device_alloc(&device->dev, sizeof(*als));
>> > + if (!indio_dev)
>> > + return -ENOMEM;
>> > +
>> > + als = iio_priv(indio_dev);
>> > +
>> > + device->driver_data = indio_dev;
>> > + als->device = device;
>> > + mutex_init(&als->lock);
>> > +
>> > + indio_dev->name = ACPI_ALS_DEVICE_NAME;
>> > + indio_dev->dev.parent = &device->dev;
>> > + indio_dev->info = &acpi_als_info;
>> > + indio_dev->modes = INDIO_BUFFER_SOFTWARE;
>> > + indio_dev->channels = acpi_als_channels;
>> > + indio_dev->num_channels = ARRAY_SIZE(acpi_als_channels);
>> > +
>> > + buffer = devm_iio_kfifo_allocate(&device->dev);
>> > + if (!buffer)
>> > + return -ENOMEM;
>> > +
>> > + iio_device_attach_buffer(indio_dev, buffer);
>> > +
>> > + return devm_iio_device_register(&device->dev, indio_dev);
>> > +}
>> > +
>> > +static const struct acpi_device_id acpi_als_device_ids[] = {
>> > + {"ACPI0008", 0},
>> > + {},
>> > +};
>> > +
>> > +MODULE_DEVICE_TABLE(acpi, acpi_als_device_ids);
>> > +
>> > +static struct acpi_driver acpi_als_driver = {
>> > + .name = "acpi_als",
>> > + .class = ACPI_ALS_CLASS,
>> > + .ids = acpi_als_device_ids,
>> > + .ops = {
>> > + .add = acpi_als_add,
>> > + .notify = acpi_als_notify,
>> > + },
>> > +};
>> > +
>> > +module_acpi_driver(acpi_als_driver);
>> > +
>> > +MODULE_AUTHOR("Zhang Rui <rui.zhang@xxxxxxxxx>");
>> > +MODULE_AUTHOR("Martin Liska <marxin.liska@xxxxxxxxx>");
>> > +MODULE_AUTHOR("Marek Vasut <marex@xxxxxxx>");
>> > +MODULE_DESCRIPTION("ACPI Ambient Light Sensor Driver");
>> > +MODULE_LICENSE("GPL");
>> >
>>

--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Fenghua Yu: "[PATCH v3 Bugfix 0/6] xstate/fpu bug fixes"
Previous message: Andrew Morton: "Re: [PATCH try #4] proc: fix PAGE_SIZE limit of /proc/$PID/cmdline"
In reply to: Gabriele Mazzotta: "Re: [PATCH v9] iio: acpi: Add support for ACPI0008 Ambient Light Sensor"
Next in thread: Marek Vasut: "Re: [PATCH v9] iio: acpi: Add support for ACPI0008 Ambient Light Sensor"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]