Re: [PATCH 2/3] libata: Add firmware_default LPM policy

[Tejun Heo]

Hello, Matthew.

On Mon, May 11, 2015 at 01:24:18PM -0700, Matthew Garrett wrote:
> Ok, I've had one person testing this report the following:
> 
> [ 1896.902726] ata1.00: exception Emask 0x0 SAct 0x800 SErr 0x40000 action 0x0
> [ 1896.902735] ata1.00: irq_stat 0x40000008
> [ 1896.902741] ata1: SError: { CommWake }
> [ 1896.902748] ata1.00: failed command: WRITE FPDMA QUEUED
> [ 1896.902758] ata1.00: cmd 61/18:58:88:d5:5d/00:00:0d:00:00/40 tag 11
> ncq 12288 out
>          res 41/04:00:9f:d5:5d/00:00:0d:00:00/40 Emask 0x401 (device error) <F>
> [ 1896.902764] ata1.00: status: { DRDY ERR }
> [ 1896.902768] ata1.00: error: { ABRT }
> [ 1896.912725] ata1.00: supports DRM functions and may not be fully accessible
> [ 1896.932716] ata1.00: supports DRM functions and may not be fully accessible
> [ 1896.942783] ata1.00: configured for UDMA/133
> [ 1896.942815] ata1: EH complete
> 
> which seems to occur in batches. I'm a little confused - isn't it
> legitimate for the phy to report comwake here?

CommWake isn't the problem here.  SError is being dumped just for
information.  The disk is reporting failure on a write command which
is diagnosed as "device error" and thus the link is not reset.  It's
really the device actively reporting command failure.

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/