[PATCH v7 5/5] pwm: core: Set enable state properly on failed call to enable

[Jonathan Richardson]

The pwm_enable function didn't clear the enabled bit if a call to a
clients enable function returned an error. The result was that the state
of the pwm core was wrong. Clearing the bit when enable returns an error
ensures the state is properly set.

Tested-by: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
Signed-off-by: Jonathan Richardson <jonathar@xxxxxxxxxxxx>
---
 drivers/pwm/core.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 224645f..18f5ac4 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -477,10 +477,20 @@ EXPORT_SYMBOL_GPL(pwm_set_polarity);
  */
 int pwm_enable(struct pwm_device *pwm)
 {
-	if (pwm && !test_and_set_bit(PWMF_ENABLED, &pwm->flags))
-		return pwm->chip->ops->enable(pwm->chip, pwm);
+	int err;
+
+	if (!pwm)
+		return -EINVAL;
+
+	if (!test_and_set_bit(PWMF_ENABLED, &pwm->flags)) {
+		err = pwm->chip->ops->enable(pwm->chip, pwm);
+		if (err) {
+			clear_bit(PWMF_ENABLED, &pwm->flags);
+			return err;
+		}
+	}
 
-	return pwm ? 0 : -EINVAL;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(pwm_enable);
 
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/