Re: [PATCH 8/8] serial: tegra: Correct error handling on DMA setup

[Jon Hunter]

On 13/05/15 05:56, Alexandre Courbot wrote:
> On Tue, May 12, 2015 at 6:51 PM, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
>>
>> On 12/05/15 09:39, Alexandre Courbot wrote:
>>> On Tue, May 5, 2015 at 11:17 PM, Jon Hunter <jonathanh@xxxxxxxxxx> wrote:
>>>> Function tegra_uart_dma_channel_allocate() does not check that
>>>> dma_map_single() mapped the DMA buffer correctly. Add a check for this
>>>> and appropriate error handling.
>>>>
>>>> Furthermore, if dmaengine_slave_config() (called by
>>>> tegra_uart_dma_channel_allocate()) fails, then memory allocated/mapped
>>>> is not freed/unmapped. Therefore, call tegra_uart_dma_channel_free()
>>>> instead of just dma_release_channel() if  dmaengine_slave_config() fails.
>>>>
>>>> Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
>>>> ---
>>>>  drivers/tty/serial/serial-tegra.c | 51 +++++++++++++++++++++------------------
>>>>  1 file changed, 28 insertions(+), 23 deletions(-)
>>>>
>>>> diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
>>>> index 96378da9aefc..3b63f103f0c9 100644
>>>> --- a/drivers/tty/serial/serial-tegra.c
>>>> +++ b/drivers/tty/serial/serial-tegra.c
>>>> @@ -949,6 +949,28 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup)
>>>>         return 0;
>>>>  }
>>>>
>>>> +static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
>>>> +               bool dma_to_memory)
>>>> +{
>>>> +       if (dma_to_memory) {
>>>> +               dmaengine_terminate_all(tup->rx_dma_chan);
>>>> +               dma_release_channel(tup->rx_dma_chan);
>>>> +               dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
>>>> +                               tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
>>>> +               tup->rx_dma_chan = NULL;
>>>> +               tup->rx_dma_buf_phys = 0;
>>>> +               tup->rx_dma_buf_virt = NULL;
>>>> +       } else {
>>>> +               dmaengine_terminate_all(tup->tx_dma_chan);
>>>> +               dma_release_channel(tup->tx_dma_chan);
>>>> +               dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
>>>> +                       UART_XMIT_SIZE, DMA_TO_DEVICE);
>>>> +               tup->tx_dma_chan = NULL;
>>>> +               tup->tx_dma_buf_phys = 0;
>>>> +               tup->tx_dma_buf_virt = NULL;
>>>> +       }
>>>> +}
>>>> +
>>>>  static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
>>>>                         bool dma_to_memory)
>>>>  {
>>>> @@ -981,6 +1003,11 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
>>>>                 dma_phys = dma_map_single(tup->uport.dev,
>>>>                         tup->uport.state->xmit.buf, UART_XMIT_SIZE,
>>>>                         DMA_TO_DEVICE);
>>>> +               if (dma_mapping_error(tup->uport.dev, dma_phys)) {
>>>> +                       dev_err(tup->uport.dev, "dma_map_single tx failed\n");
>>>> +                       dma_release_channel(dma_chan);
>>>> +                       return -ENOMEM;
>>>
>>> Is -ENOMEM the error code we want to return here?
>>
>> I think that it is appropriate as we are unable to map the memory we are
>> requesting. I did look at a few other drivers and several return -ENOMEM
>> here. I saw others return -EFAULT, but given this is memory related,
>> seems ok, unless you have a better suggestion.
>>
>>> IIUC dma_buf will be leaked if an error occurs here because it has not
>>> been assigned to your structure and will therefore be ignored when
>>> tegra_uart_dma_channel_free() is called.
>>
>> In the original code, if dmaengine_slave_config() failed, then yes there
>> would be a memory leak. That should no longer be the case.
> 
> Mmm I am pretty sure that even after your patch the memory allocated
> through the DMA API will not be freed if we hit an error there,
> because dma_buf/dma_phys are not yet affected to your tegra_uart_port
> structure when you call dma_release_channel(). Or maybe I am missing
> something?

So there are two paths through the tegra_uart_dma_channel_allocate()
function, one for RX and one for TX. In the RX case, a buffer is
allocated via dma_alloc_coherent() and if this fails, then we simply
call dma_release_channel(). So there should not be any memory leaked in
this path and we should not need to worry about dma_buf/dma_phys here.

In the TX case, the xmit.buf (allocated by the serial_core driver) is
mapped to physical space for DMA. If the mapping fails, the xmit.buf is
not freed here and we simply call dma_release_channel().

If you are concerned about the xmit.buf, then this is part serial core
and allocated when uart_open() is called. It uart_open() fails, because
the tegra_uart_dma_channel_allocate() fails, then uart_close() will be
called (according the to kernel-doc for uart_open) and should be freed
when uart_shutdown() is called. So I don't see a problem here.

Let me know if I am misunderstanding you.

>>
>>> Since we have a "scrub" label at the end of this function, I think I'd
>>> also prefer if this block and the one before could jump to error
>>> labels as well for consistency.
>>
>> Yes I see. I wondered if it would be better to just get rid of the
>> "scrub" label since it is only used in one place instead?
> 
> I am fine with whichever makes the most sense, although I am biased
> towards having all error handing at the end of the function. But your
> call.

Ok.

Cheers
Jon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/