RE: [PATCH v2] sc16is7xx: spi interface is added

From: ram kiran
Date: Wed May 13 2015 - 09:01:46 EST


> On Wed, 13 May 2015 16:27:58 +0530, ram.i hcltech wrote:
>> spi interface for sc16is7xx is added along with Kconfig flag
>> to enable spi or i2c, thus in a instance we can have either
>> spi or i2c or both, in sync to the hw.
>>
>> Signed-off-by: ram.i hcltech <indrakanti_ram@xxxxxxxxxxx>
>> ---
>>
>> Changes in v2:
>> -Added seprate flags for i2c and spi
>> -Added space in the comments lines
>> -Added MODULE_ALIAS for spi interface
>> ---
>> drivers/tty/serial/Kconfig | 27 +++++++++++++++--
>> drivers/tty/serial/sc16is7xx.c | 69 +++++++++++++++++++++++++++++++++++++++++-
>> 2 files changed, 92 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
>> index f8120c1..8c505b2 100644
>> --- a/drivers/tty/serial/Kconfig
>> +++ b/drivers/tty/serial/Kconfig
>> @@ -1181,13 +1181,34 @@ config SERIAL_SCCNXP_CONSOLE
>>
>> config SERIAL_SC16IS7XX
>> tristate "SC16IS7xx serial support"
>> - depends on I2C
>
> Please keep the dependency like this:
> depends on I2C || SPI_MASTER
>
> (or SPI, I don't know what's the difference. SPI seems fine.)
>
The depends on is pushed to the interface selection... i think that would be
better as it be collated accordingly.

>> select SERIAL_CORE
>> - select REGMAP_I2C if I2C
>> help
>> This selects support for SC16IS7xx serial ports.
>> Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
>> - SC16IS760 and SC16IS762.
>> + SC16IS760 and SC16IS762, over i2c or spi.
>> + select at least one of the i2c or spi interface.
>
> I would phrase the help message like this:
>
> This selects support for SC16IS7xx serial ports.
> Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752,
> SC16IS760 and SC16IS762. Select supported buses using options below.
>
Yeah a better one..will take it...

>> +config SERIAL_SC16IS7XX_I2C
>> + bool "SC16IS7xx for I2C interface"
>
> Please add "default y" to minimize oldconfig pain for those already
> using the driver.
>
yes, missed this.
>> + depends on SERIAL_SC16IS7XX=y
>
> Why =y?
>
>> + depends on I2C
>> + select REGMAP_I2C if I2C
>> + help
>> + to enable i2c interface for SC16IS7XX, say Y,
>> + Otherwise, for i2c say N.
>> + this would make the driver to interface over SPI and I2C would
>> + be diabled.
>
> I would phrase it simply like this:
>
> Enable SC16IS7xx driver on I2C bus.
short description for the flags fails in checkpatch.pl and hence the text..
>
>> +config SERIAL_SC16IS7XX_SPI
>> + bool "SC16IS7xx for spi interface"
>> + depends on SERIAL_SC16IS7XX
>> + depends on SPI_MASTER
>
> Right now it is possible to select the driver without any bus-specific
> option being set. I don't see an easy way to avoid this but please
> make sure that there are no build failures/warnings in this scenario.
>
Yes, that being the reason, and for the driver to work, there should be any one the
interfaces to be enabled by default.

> You should also extend the binding information to include the new SPI
> interface (Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt)
>
Yes, this needs to be updated, i think that shall be a separate patch...
>
> Thanks!
> --
> To unsubscribe from this list: send the line "unsubscribe linux-serial" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/